From: Alexander Kotelnikov Date: Mon, 28 Jun 2004 09:46:41 +0000 Subject: [LARTC] Prioritizing interactive traffic does not work Message-Id: <874qowt3pa.fsf@vinci.loc> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello. In short Linux Advanced Routing & Traffic Control HOWTO's chapter 15.4. Prioritizing interactive traffic does not help me at all. I have an asymmetric ADSL connection nominal 64Kbit in / 16Kbit out, real (based on bulk transfers measures) 256Kbit/26Kbit. First thing I would like to improve is to keep interactive (ssh) connection fast even if uplink is full. The test I make for this measuring full ssh connection time (with command 'time ssh flowid 1:2 BTW I have a couple of questions about prio qdisc: 1. What if I add it with tc qdisc add dev eth0 root handle 1: prio ? how do I put filters on it's classes? 2. Is there a simple way to write a filter which matches all packets? Thanks, -- Alexander Kotelnikov Saint-Petersburg, Russia _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/