From: Peter Korsgaard Date: Sat, 07 Dec 2019 12:09:58 +0100 Subject: [Buildroot] [PATCH RFC 1/1] package/rauc: select fw_printenv for uboot based systems In-Reply-To: <20191205094238.69841-1-titouan.christophe@railnova.eu> (Titouan Christophe's message of "Thu, 5 Dec 2019 10:42:38 +0100") References: <20191205094238.69841-1-titouan.christophe@railnova.eu> Message-ID: <875zismlx5.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Titouan" == Titouan Christophe writes: > When operating on a uboot based system, rauc interacts with > the bootloader environment using fw_printenv and fw_setenv [1]. > These commands should therefore be present on the target if > the system being built uses uboot. > [1] See: > https://github.com/rauc/rauc/blob/v1.2/src/bootchooser.c#L21-L22 > https://github.com/rauc/rauc/blob/v1.2/src/bootchooser.c#L644-L645 > Signed-off-by: Titouan Christophe Committed to 2019.02.x, 2019.08.x and 2019.11.x, thanks. -- Bye, Peter Korsgaard