From: Peter Korsgaard Date: Sun, 27 Jan 2019 23:18:53 +0100 Subject: [Buildroot] [PATCH 1/1] fs/common.mk: enable multithreaded xz compression In-Reply-To: <87a7jln4bt.fsf@dell.be.48ers.dk> (Peter Korsgaard's message of "Sun, 27 Jan 2019 23:06:14 +0100") References: <1548036475-25449-1-git-send-email-james.hilliard1@gmail.com> <871s55ykoj.fsf@dell.be.48ers.dk> <20190126150622.23c7375e@windsurf> <87a7jln4bt.fsf@dell.be.48ers.dk> Message-ID: <875zu9n3qq.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Peter" == Peter Korsgaard writes: >> Does it matter than the output of -T 0 and -T 1 are identical ? > It would cause an extra change in output between buildroot versions > using -T 0 and ones using -T 1 - But OK, probably that isn't really > important given all the other changes. > What I really meant was if the -T 1 option affected the output format, > and if so, if the difference involved any tradeoff (E.G. perhaps -T 1 > compresses slightly worse than -T 0) and if repeated runs with -T 1 > would generate the same output (on same machine or on another machine > with different number of threads). Sorry, got -T 1 and -T 0 mixed up, I meant -T 0 here. >> What matters for BR2_REPRODUCIBLE=y is if the same input, with -T 0, >> always provide the exact identical output. > With the new patch that only enables -T 1 for !reproducible builds, > that is correct. The assumption is that this is not true, especially between systems with different number of CPUs. -- Bye, Peter Korsgaard