From: Peter Korsgaard Date: Sun, 15 Sep 2019 20:24:37 +0200 Subject: [Buildroot] [PATCH] configs/lafrite: new defconfig In-Reply-To: <20190915160235.10d486be@windsurf.home> (Thomas Petazzoni's message of "Sun, 15 Sep 2019 16:02:35 +0200") References: <20190914055621.19573-1-peter@korsgaard.com> <20190915160235.10d486be@windsurf.home> Message-ID: <878sqp4dui.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Thomas" == Thomas Petazzoni writes: > On Sat, 14 Sep 2019 07:56:20 +0200 > Peter Korsgaard wrote: >> Add basic support for the Libre Computer "La Frite" SBC. >> >> Signed-off-by: Peter Korsgaard >> --- >> .gitlab-ci.yml | 1 + >> DEVELOPERS | 2 ++ >> board/librecomputer/lafrite/genimage.cfg | 10 ++++++ >> .../lafrite/overlay/extlinux/extlinux.conf | 4 +++ >> board/librecomputer/lafrite/readme.txt | 34 +++++++++++++++++++ >> configs/lafrite_defconfig | 20 +++++++++++ >> 6 files changed, 71 insertions(+) >> create mode 100644 board/librecomputer/lafrite/genimage.cfg >> create mode 100644 board/librecomputer/lafrite/overlay/extlinux/extlinux.conf >> create mode 100644 board/librecomputer/lafrite/readme.txt >> create mode 100644 configs/lafrite_defconfig > Applied to master, thanks. I guess the reason for not building a > bootloader is that it is stored in some other non-volatile storage on > the board ? Yes, U-Boot is in the 16MB SPI flash. It uses the normal distro bootcmds and supports USB, so it nicely boots from a suitable rootfs on a USB flash drive. -- Bye, Peter Korsgaard