From: Peter Korsgaard Date: Thu, 06 Feb 2014 23:10:27 +0100 Subject: [Buildroot] [PATCH] zedboard: add Avnet Zedboard support. In-Reply-To: <1391724285-23135-1-git-send-email-thomas.petazzoni@free-electrons.com> (Thomas Petazzoni's message of "Thu, 6 Feb 2014 23:04:45 +0100") References: <1391724285-23135-1-git-send-email-thomas.petazzoni@free-electrons.com> Message-ID: <878utnnb8s.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Thomas" == Thomas Petazzoni writes: > From: Spenser Gilliland > [Thomas: update to recent Buildroot which had renamed several > Config.in options, lock down kernel headers version] > Signed-off-by: Spenser Gilliland > Signed-off-by: Thomas Petazzoni Committed, thanks. > +++ b/board/avnet/zedboard/readme.txt > @@ -0,0 +1,13 @@ > +This is the buildroot board support for the Avnet Zedboard. The Zedboard is > +a development board based on the Xilinx Zynq-7000 based All-Programmable > +System-On-Chip. > + > +Zedboard information including schematics, reference designs, and manuals are > +available from http://www.zedboard.org . > + > +To boot the Zedboard using a buildroot generated image copy the following files > +to the sdcard: > + zynq-zed.dtb -> devicetree.dtb > + rootfs.cpio.gz.uboot -> uramdisk.image.gz > + uImage -> uImage What about u-boot? > +# Bootloader > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BOARDNAME="zynq_zed" > +BR2_TARGET_UBOOT_CUSTOM_GIT=y > +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://github.com/Xilinx/u-boot-xlnx.git" > +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="xilinx-v14.5" > +BR2_TARGET_UBOOT_FORMAT_ELF=y -- Bye, Peter Korsgaard