From: Goswin von Brederlow Subject: Re: telling mdadm to use spare drive. Date: Wed, 07 Nov 2007 10:17:51 +0100 Message-ID: <87bqa6jtxc.fsf@informatik.uni-tuebingen.de> References: <20071104170502.6db7fcb1@absurd> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: In-Reply-To: <20071104170502.6db7fcb1@absurd> (Janek Kozicki's message of "Sun, 4 Nov 2007 17:05:02 +0100") Sender: linux-raid-owner@vger.kernel.org To: Janek Kozicki Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids Janek Kozicki writes: > Hi, > > I finished copying all data from old disc hdc to my shiny new > RAID5 array (/dev/hda3 /dev/sda3 missing). Next step is to create a > partition on hdc and add it to the array. And so I did this: > > # mdadm --add /dev/md1 /dev/hdc3 > > But then I had a problem - the /dev/hdc3 was a spare, it didn't > resync automatically: Strange. That is exactly how I always do it and it always just worked. mdadm should start syncing on any spare as soon as a disk fails or you add the spare to a degraded array afaik. No special "start now" interaction needed. MfG Goswin