From: Soeren Moch Date: Sat, 30 May 2020 19:17:49 +0200 Subject: [PATCHv5][ 4/7] board: tbs2910_defconfig: Add support for booting general purpose distributions In-Reply-To: <20200530032425.10670-4-GNUtoo@cyberdimension.org> References: <20200530032425.10670-1-GNUtoo@cyberdimension.org> <20200530032425.10670-4-GNUtoo@cyberdimension.org> Message-ID: <87ef95fd-7b8e-9db6-6732-bcf28364bf29@web.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 30.05.20 05:24, Denis 'GNUtoo' Carikli wrote: > This is needed to enable distro_boot support later on. > > Adding the necessary configuration to enable booting general > purpose distributions is typically done by enabling > CONFIG_DISTRO_DEFAULTS. > > However the resulting image size is is already very close to > the size limit and PXE isn't strictly needed, so instead we > made sure that all the configuration selected by > CONFIG_DISTRO_DEFAULTS were selected, with the exception of > PXE related configuration (CONFIG_BOOTP_PXE and > CONFIG_CMD_PXE) that are both disabled. > > With arm-linux-gnueabi-gcc 9.3.0-1 from the Parabola > GNU/Linux distribution, we have the following size > differences: > - text: +7526 bytes > - data: +28 bytes > - bss: -12 bytes > - total: +7542 bytes > > Signed-off-by: Denis 'GNUtoo' Carikli It is quite uncommon to use "board: tbs2910_defconfig" instead of "board: tbs2910" in the patch title.But maybe not that important. Reviewed-by: Soeren Moch Thanks, Soeren > --- > Changelog since v4: > ------------------- > - As requested, I Added in the commit message the reason why the > change is really needed as the short summary is not self > explanatory enough. > - Fixed a typo in the commit message > (resultimg image instead of resulting image). > - Switched to the use of CONFIG_CMD_SYSBOOT instead of > CONFIG_DISTRO_BOOTCMD as suggested > The only changes between the two resulting .config are the following: > -CONFIG_DISTRO_DEFAULTS=y > +# CONFIG_DISTRO_DEFAULTS is not set > -CONFIG_BOOTP_PXE=y > -CONFIG_BOOTP_PXE_CLIENTARCH=0x15 > -CONFIG_CMD_PXE=y > +# CONFIG_CMD_PXE is not set > --- > configs/tbs2910_defconfig | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/configs/tbs2910_defconfig b/configs/tbs2910_defconfig > index d14ff45615..fc9095c859 100644 > --- a/configs/tbs2910_defconfig > +++ b/configs/tbs2910_defconfig > @@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=1 > CONFIG_PRE_CON_BUF_ADDR=0x7c000000 > CONFIG_CMD_HDMIDETECT=y > CONFIG_AHCI=y > +CONFIG_ENV_VARS_UBOOT_CONFIG=y > CONFIG_BOOTDELAY=3 > CONFIG_USE_BOOTCOMMAND=y > CONFIG_BOOTCOMMAND="mmc rescan; if run bootcmd_up1; then run bootcmd_up2; else run bootcmd_mmc; fi" > @@ -43,6 +44,7 @@ CONFIG_CMD_MII=y > CONFIG_CMD_PING=y > CONFIG_CMD_CACHE=y > CONFIG_CMD_TIME=y > +CONFIG_CMD_SYSBOOT=y > CONFIG_CMD_EXT2=y > CONFIG_CMD_EXT4=y > CONFIG_CMD_EXT4_WRITE=y