From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Wed, 12 Jul 2017 18:54:42 +0200 Subject: [PATCH 0/6] Macchiatobin updates In-Reply-To: <20170708191317.GM4902@n2100.armlinux.org.uk> (Russell King's message of "Sat, 8 Jul 2017 20:13:17 +0100") References: <20170708191317.GM4902@n2100.armlinux.org.uk> Message-ID: <87fue1bnot.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Russell King, On sam., juil. 08 2017, Russell King - ARM Linux wrote: > This series, based upon the 4.12-rc6 backports branch in the MISL tree: > - adds a maintainer entry for the Macchiatobin board. > - adds GPIO interrupt support to the CP110s > - adds the pinmux entries > - corrects the 5V regulator GPIO entry > - adds support for the I2C mux (used for the SFP slots) > - adds PCIe support > > All entries include the appropriate pinmux and GPIO configuration. > > PCIe support has not been tested locally as I have no PCIe cards to > test with; this patch includes support for the PCIe reset GPIO signal. > If others can test that patch and let me know whether it works, I would > be most grateful. > The first patch had been applied on mvebu/arm64-for-4.14. Patch 2 to 6 had been applied on mvebu/dt64-for-4.14. For the patch 4, I merged it with the patch that Thomas previously sent because it was not in mainline yet even if it was on the backport branch. The resulting patch is attached. -------------- next part -------------- A non-text attachment was scrubbed... Name: 0001-arm64-dts-marvell-fix-USB3-regulator-definition-on-M.patch Type: text/x-diff Size: 2133 bytes Desc: not available URL: -------------- next part -------------- Finally I tested the last patch with an Ethernet PCIe card it worked well, but the reset part was not tested as I don't know how it should be tested. As soon as the v4.13-rc1 will be released then the branches will be rebased on it and renamed mvebu/arm64 and mvebu/dt64. Thanks, Gregory > MAINTAINERS | 6 ++ > arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 89 +++++++++++++++++++++- > .../boot/dts/marvell/armada-cp110-master.dtsi | 11 ++- > .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 11 ++- > 4 files changed, 112 insertions(+), 5 deletions(-) > > -- > RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ > FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up > according to speedtest.net. -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com