From: khilman@deeprootsystems.com (Kevin Hilman) Date: Tue, 05 Oct 2010 09:35:08 -0700 Subject: [PATCH v2] OMAP2PLUS: WDT: Fix: Disable WDT after reset during init In-Reply-To: <1286015771-22041-1-git-send-email-charu@ti.com> (Charulatha Varadarajan's message of "Sat, 2 Oct 2010 16:06:11 +0530") References: <1286015771-22041-1-git-send-email-charu@ti.com> Message-ID: <87fwwktx6r.fsf@deeprootsystems.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org "Varadarajan, Charulatha" writes: > Inorder to avoid any assumptions from bootloader, the watchdog > timer module is reset during init. This enables the watchdog > timer. > > Therefore, it is required to disable WDT after it is reset > during init. Otherwise the system would reboot as per the default > watchdog timer registers settings. > > Later, when the watchdog driver is loaded, the watchdog timer settings > is adjusted as per the default timer_margin set in the driver and the > driver would supports the normal operations supported by OMAP watchdog > timer. > > Link to related discussions: > https://patchwork.kernel.org/patch/219072/ > > Issue reported by Kevin can be found at: > https://patchwork.kernel.org/patch/217262/ > > Signed-off-by: Charulatha V > Reported-by: Kevin Hilman Acked-by: Kevin Hilman Tony, this should queue up for .37 on top of my pm-hwmods branch. It applies cleanly to current l-o master. Kevin