From: gregory.clement@bootlin.com (Gregory CLEMENT)
Date: Tue, 24 Jul 2018 15:16:52 +0200
Subject: [PATCH net-next v3 0/8] A fix and a few improvements on mvneta
In-Reply-To: <20180718161057.28704-1-gregory.clement@bootlin.com> (Gregory
 CLEMENT's message of "Wed, 18 Jul 2018 18:10:49 +0200")
References: <20180718161057.28704-1-gregory.clement@bootlin.com>
Message-ID: <87h8ko7ozf.fsf@bootlin.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi David,
 
 On mer., juil. 18 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> Hello,
>
> This series brings some improvements for the mvneta driver and also
> adds a fix.
>
> Compared to the v2, the main change is another patch fixing a bug
> in mtu_change.
>

I saw in patchwork, the status was "Accepted" (for example the 1st patch
[1]). However the series is not in your git branches and usually you
also answered to the series to inform that you have applied it. So I
would like to know what is the status of the series.

Thanks,

Gregory


[1]: https://patchwork.ozlabs.org/patch/945807/

> Gregory
>
> Changelog:
> v1 -> v2
>
>  - In patch 2, use EXPORT_SYMBOL_GPL for mvneta_bm_get and
>    mvneta_bm_put to be used in module, reported by kbuild test robot.
>
>  - In patch 4, add the counter to the driver's ethtool state,
>    suggested by David Miller.
>
>  - In patch 6, use a single if, suggested by Marcin Wojtas
>
> v2 -> v3
>
>  - Adding a patch fixing the mtu change issue
>
>  - Removing the inline keyword for mvneta_rx_refill() and let the
>    comiler decided, suggested by David Miller.
>
> Andrew Lunn (1):
>   net: ethernet: mvneta: Fix napi structure mixup on armada 3700
>
> Gregory CLEMENT (3):
>   net: mvneta: remove data pointer usage from device_node structure
>   net: mvneta: discriminate error cause for missed packet
>   net: mvneta: Allocate page for the descriptor
>
> Yelena Krivosheev (4):
>   net: mvneta: fix mtu change on port without link
>   net: mvneta: increase number of buffers in RX and TX queue
>   net: mvneta: Verify hardware checksum only when offload checksum
>     feature is set
>   net: mvneta: Improve the buffer allocation method for SWBM
>
>  drivers/net/ethernet/marvell/mvneta.c    | 409 ++++++++++++++---------
>  drivers/net/ethernet/marvell/mvneta_bm.c |  15 +
>  drivers/net/ethernet/marvell/mvneta_bm.h |   8 +-
>  3 files changed, 272 insertions(+), 160 deletions(-)
>
> -- 
> 2.18.0
>

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com