From: khilman@linaro.org (Kevin Hilman) Date: Fri, 05 Apr 2013 10:56:03 -0700 Subject: [PATCH 0/5] gpio/omap: 2nd batch of updates for v3.10 In-Reply-To: <1365106576-31816-1-git-send-email-jon-hunter@ti.com> (Jon Hunter's message of "Thu, 4 Apr 2013 15:16:11 -0500") References: <1365106576-31816-1-git-send-email-jon-hunter@ti.com> Message-ID: <87hajklv4c.fsf@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Jon Hunter writes: > Main change is ensuring that the state of a gpio bank is restored when > booting with device-tree. The rest of the patches are clean-ups and one > optimisation. > > The patch modifying the *.dtsi files should go via Benoit Cousson's > for_3.10/dts branch [1] as it is dependent on changes in his branch but > I have included here for completeness. > > Testing includes: > - Boot testing on OMAP5912 OSK, OMAP2420 H4, OMAP3430 SDP, OMAP4430 SDP > and AM335x EVM. > - Verified that GPIO interrupts are working on OMAP5912 OSK, OMAP2420 H4, > OMAP3430 SDP and OMAP4430 SDP by making sure networking was working > correctly as these boards use a GPIO with the ethernet chips. Also > checked /proc/interrupts to ensure GPIO interrupt counts are > incrementing as expected. > > [1] http://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git > > Jon Hunter (4): > gpio/omap: free irq domain in probe() failure paths > gpio/omap: optimise interrupt service routine > gpio/omap: force restore if context loss is not detectable > ARM: dts: OMAP2+: Identify GPIO banks that are always powered > > Tarun Kanti DebBarma (1): > gpio/omap: remove extra context restores in *_runtime_resume() For the gpio/omap patches Reviewed-by: Kevin Hilman