From: Petr Rockai Date: Mon, 15 Feb 2010 23:09:29 +0100 Subject: [PATCH] Allow incomplete mirror repairs in lvconvert --repair. Message-ID: <87hbpi178m.fsf@twilight.int.mornfall.net.> List-Id: To: lvm-devel@redhat.com MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Hi, the attached patch should address RHBZ 560105 and 560111. This changes lvconvert --repair as follows: - downconvert (like before) - try to replace everything (like before) - if the second step fails, try to reduce number of mirror images (one at a time) until only 2 remain - if this still fails and we used to have a disk log, try 2-way + corelog This should basically give you an LV that is closest to the original mirror, in the space constraints of free PV areas. Please note that this patch also changes the failure/success returns of (manual) lvconvert --repair. As far as the initial downconversion succeeds -- i.e. the resulting LV is not partial, we report success. Failures to replace (part of) the failed devices are now reported as warnings. Yours, Petr. -------------- next part -------------- A non-text attachment was scrubbed... Name: lvconvert-repair-partial.diff Type: text/x-diff Size: 5553 bytes Desc: not available URL: