From: Peter Korsgaard Date: Sun, 01 Dec 2019 18:54:44 +0100 Subject: [Buildroot] [PATCH 1/1] configs: add raspberrypi4 64bits defconfig In-Reply-To: (Romain Naour's message of "Fri, 29 Nov 2019 18:43:42 +0100") References: <20191129160208.3520611-2-arthur.courtel@smile.fr> Message-ID: <87k17grkwr.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Romain" == Romain Naour writes: > Hi Arthur, > Le 29/11/2019 ? 17:02, Arthur Courtel a ?crit?: >> This configuration builds a 64bit image for RaspberryPi 4. >> >> Signed-off-by: Arthur Courtel >> --- >> .../raspberrypi/genimage-raspberrypi4-64.cfg | 30 +++++++++++++++++++ >> board/raspberrypi/post-image.sh | 4 +-- >> board/raspberrypi4-64 | 1 + >> configs/raspberrypi4_64_defconfig | 24 +++++++++++++++ >> 4 files changed, 57 insertions(+), 2 deletions(-) >> create mode 100644 board/raspberrypi/genimage-raspberrypi4-64.cfg >> create mode 120000 board/raspberrypi4-64 >> create mode 100644 configs/raspberrypi4_64_defconfig >> >> diff --git a/board/raspberrypi/genimage-raspberrypi4-64.cfg b/board/raspberrypi/genimage-raspberrypi4-64.cfg >> new file mode 100644 >> index 0000000000..3c480e98f0 >> --- /dev/null >> +++ b/board/raspberrypi/genimage-raspberrypi4-64.cfg >> @@ -0,0 +1,30 @@ >> +image boot.vfat { >> + vfat { >> + files = { >> + "bcm2711-rpi-4-b.dtb", >> + "rpi-firmware/cmdline.txt", >> + "rpi-firmware/config.txt", >> + "rpi-firmware/fixup4.dat", >> + "rpi-firmware/start4.elf", >> + "rpi-firmware/overlays", >> + "Image" > Not related to your patch but the raspberry-pi3 defconfig use zImage but the > 64bit version use Image. > Any reason for this? Image is the default name for arm64 kernels. There is no "zImage" support for arm64. -- Bye, Peter Korsgaard