From: gregory.clement@bootlin.com (Gregory CLEMENT) Date: Fri, 21 Sep 2018 16:15:12 +0200 Subject: [RESEND PATCH 2/4] arm64: dts: marvell: add thermal-zone node in ap806 DTSI file In-Reply-To: <20180830081501.11569-2-miquel.raynal@bootlin.com> (Miquel Raynal's message of "Thu, 30 Aug 2018 10:14:59 +0200") References: <20180830081501.11569-1-miquel.raynal@bootlin.com> <20180830081501.11569-2-miquel.raynal@bootlin.com> Message-ID: <87k1nfgcnj.fsf@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Miquel, On jeu., ao?t 30 2018, Miquel Raynal wrote: > Add a thermal-zone node and fill in all the sensors available in an > ap806 (one in the IC plus one per CPU). > > Signed-off-by: Miquel Raynal Applied on mvebu/dt64 Thanks, Gregory > --- > arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 60 +++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > index 3da3a13f7ee1..7d94c1fa592a 100644 > --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > @@ -6,6 +6,7 @@ > */ > > #include > +#include > > /dts-v1/; > > @@ -265,8 +266,67 @@ > ap_thermal: thermal-sensor at 80 { > compatible = "marvell,armada-ap806-thermal"; > reg = <0x80 0x10>; > + #thermal-sensor-cells = <1>; > }; > }; > }; > }; > + > + /* > + * The thermal IP features one internal sensor plus, if applicable, one > + * remote channel wired to one sensor per CPU. > + * > + * The cooling maps are always empty as there are no cooling devices. > + */ > + thermal-zones { > + ap_thermal_ic: ap-thermal-ic { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 0>; > + > + trips { }; > + cooling-maps { }; > + }; > + > + ap_thermal_cpu1: ap-thermal-cpu1 { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 1>; > + > + trips { }; > + cooling-maps { }; > + }; > + > + ap_thermal_cpu2: ap-thermal-cpu2 { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 2>; > + > + trips { }; > + cooling-maps { }; > + }; > + > + ap_thermal_cpu3: ap-thermal-cpu3 { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 3>; > + > + trips { }; > + cooling-maps { }; > + }; > + > + ap_thermal_cpu4: ap-thermal-cpu4 { > + polling-delay-passive = <1000>; > + polling-delay = <1000>; > + > + thermal-sensors = <&ap_thermal 4>; > + > + trips { }; > + cooling-maps { }; > + }; > + }; > }; > -- > 2.17.1 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com