From: Peter Korsgaard Subject: Re: [RFC][PATCH] Xilinx uartlite serial driver Date: Wed, 04 Oct 2006 17:34:25 +0200 Message-ID: <87lknwksce.fsf@slug.be.48ers.dk> References: <87ac9o3ak3.fsf@sleipner.barco.com> <878xlgercm.fsf@slug.be.48ers.dk> <20060912093301.77f75bfb@localhost.localdomain> <87ejugxqbw.fsf@slug.be.48ers.dk> <451BA096.9050209@dlasys.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from astra.telenet-ops.be ([195.130.132.58]:32421 "EHLO astra.telenet-ops.be") by vger.kernel.org with ESMTP id S1161243AbWJDPer (ORCPT ); Wed, 4 Oct 2006 11:34:47 -0400 In-Reply-To: <451BA096.9050209@dlasys.net> (David H. Lynch, Jr.'s message of "Thu, 28 Sep 2006 06:14:46 -0400") Sender: linux-serial-owner@vger.kernel.org List-Id: linux-serial@vger.kernel.org To: "David H. Lynch Jr." Cc: linux-serial@vger.kernel.org >>>>> "David" == David H Lynch writes: Sorry for the delay, I've been ill.. David> There is more than one UartLite driver. I have one from someone David> else that includes DCR support. David> I wrote one that includes early boot console support - which is David> fairly trivial. Yes, I know (after writing mine). That's why getting the driver mainline is important, otherwise people will keep on reinventing the wheel.. David> I will try to separate out my early boot console patches - would David> this be the appropriate place to post them ? Yes, presumably once the base driver goes in. David> I beleive my driver is the one Peter believes is broken. Me? I don't even think I ever tried your driver.. David> I can't quite understand why one would build a Xilinx FPGA with both. We have done it several times. 16550s for when you need full functionality (changeable baudrate, control lines, ..) and uartlites for dedicated links. David> If Peter's driver is likely to get accepted I have all of the David> platform device code done for my own driver I can move it to his. David> I did a BSP for the Pico E12/E14, they use either UartLite out of David> the box, or a pseudo serial device they call the Keyhole David> that can be used if the E12/E14 are hosted (they are CF/Cardbus David> cards respectively) Ok, but where would you add it? The ML300/403 boards are afaik the only ones in mainline. -- Bye, Peter Korsgaard