From: Markus Plail Subject: Re: Re: [alsa-cvslog] CVS: alsa-kernel/pci/emu10k1 emu10k1_main.c,1.12,1.13 Date: Tue, 16 Apr 2002 18:30:36 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <87lmbnli6r.fsf@www.gitteundmarkus.de> References: <873cxxmmjt.fsf@www.gitteundmarkus.de> <87sn5vn72w.fsf@www.gitteundmarkus.de> <87elhfn1rd.fsf@www.gitteundmarkus.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: In-Reply-To: (Takashi Iwai's message of "Tue, 16 Apr 2002 18:07:26 +0200") Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: Jaroslav Kysela , "alsa-devel@lists.sourceforge.net" List-Id: alsa-devel@alsa-project.org Hi Takashi! * Takashi Iwai writes: > yes. now please check the state of this switch by alsamixer. try to > play raw data once, and check whether the switch is changed. > alsamixer will show the current status (and change the status if any > notified). This is the same as if I changed the switch in alsamixer by hand, right? This does not work. I have done this before thousands of times. The switch is working fine, but has nothing to do with my problem (IMHO). Only if I change emumixer the way you did by accident I get AC3 passthrough. If AC3 passthrough is enabled, i.e. I watch a DVD with xine, the digital/analog switch doesn't do anything, i.e. I can't turn off the audio. If I play for example a mp3 with xmms, the digital/analog switch is working as expected. Regards Markus