From: gregory.clement@bootlin.com (Gregory CLEMENT) Date: Fri, 21 Sep 2018 16:14:54 +0200 Subject: [RESEND PATCH 1/4] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon In-Reply-To: <20180830081501.11569-1-miquel.raynal@bootlin.com> (Miquel Raynal's message of "Thu, 30 Aug 2018 10:14:58 +0200") References: <20180830081501.11569-1-miquel.raynal@bootlin.com> Message-ID: <87o9crgco1.fsf@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Miquel, On jeu., ao?t 30 2018, Miquel Raynal wrote: > New bindings impose to declare the thermal IP from within a new syscon. > > Signed-off-by: Miquel Raynal Applied on mvebu/dt64 Thanks, Gregory > --- > arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 14 ++++++++++---- > arch/arm64/boot/dts/marvell/armada-cp110.dtsi | 18 ++++++++++++------ > 2 files changed, 22 insertions(+), 10 deletions(-) > > diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > index 92215342b453..3da3a13f7ee1 100644 > --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi > @@ -256,10 +256,16 @@ > }; > }; > > - ap_thermal: thermal at 6f808c { > - compatible = "marvell,armada-ap806-thermal"; > - reg = <0x6f808c 0x4>, > - <0x6f8084 0x8>; > + ap_syscon1: system-controller at 6f8000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0x6f8000 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + ap_thermal: thermal-sensor at 80 { > + compatible = "marvell,armada-ap806-thermal"; > + reg = <0x80 0x10>; > + }; > }; > }; > }; > diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi > index 4315eeb0a473..62842fae2571 100644 > --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi > @@ -177,12 +177,6 @@ > interrupts = <77 IRQ_TYPE_LEVEL_HIGH>; > }; > > - CP110_LABEL(thermal): thermal at 400078 { > - compatible = "marvell,armada-cp110-thermal"; > - reg = <0x400078 0x4>, > - <0x400070 0x8>; > - }; > - > CP110_LABEL(syscon0): system-controller at 440000 { > compatible = "syscon", "simple-mfd"; > reg = <0x440000 0x2000>; > @@ -223,6 +217,18 @@ > }; > }; > > + CP110_LABEL(syscon1): system-controller at 400000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0x400000 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + CP110_LABEL(thermal): thermal-sensor at 70 { > + compatible = "marvell,armada-cp110-thermal"; > + reg = <0x70 0x10>; > + }; > + }; > + > CP110_LABEL(usb3_0): usb3 at 500000 { > compatible = "marvell,armada-8k-xhci", > "generic-xhci"; > -- > 2.17.1 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com