From: Peter Korsgaard Date: Mon, 25 Apr 2016 16:40:24 +0200 Subject: [Buildroot] [PATCH 1/1] Preliminary support for Raspberry Pi 3 with symlink In-Reply-To: <7c641e674768b186ec37e275adbd41da@eja.it> (Ubaldo Porcheddu's message of "Mon, 25 Apr 2016 15:34:40 +0100") References: <1461442370-22393-1-git-send-email-ubaldo@eja.it> <871t5triwb.fsf@dell.be.48ers.dk> <81b71ac5323b1793405c3192b6ac5264@eja.it> <20160425161610.4e5cbe87@armant.core.local.os.greenbone.net> <7c641e674768b186ec37e275adbd41da@eja.it> Message-ID: <87oa8xpx9j.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Ubaldo" == Ubaldo Porcheddu writes: Hi, >>> I just tested the new kernel version but it doesn't give me the login >>> prompt, the kernel seems to be booting fine as it can recognize my >>> keyboard but it doesn't accept any input. >>> >> >> I had something similar, removed the 'console=ttyAMA0...' from the >> cmdline.txt file, and it booted through. Mine was not able to recognize >> my keyboard, but with dropbear and an extra user I was able to login. > after removing the extra console declaration I can also get the login, > my keyboard get recognized by the kernel but it doesn't work properly, > seems to be adding extra characters after any key press. Funky. Removing console=ttyAMA0 (or console=ttyS0) would mean that tty1 becomes /dev/console, so we end up having two gettys running on tty1 which could explain the double characters. I'm not sure why it doesn't work with console= pointing at the serial port. Luca, you added the serial console handling, any idea what might be going wrong? -- Venlig hilsen, Peter Korsgaard