From: Jerome Oufella Date: Thu, 29 Aug 2013 15:02:16 +0000 Subject: Re: [lm-sensors] sht15 kernel driver Message-Id: <87ppswh75z.fsf@jerows.sfl> List-Id: References: <521E7CA7.5060407@snapithd.com> <87fvtt4dmt.fsf@jerows.sfl> <521EBD9F.7070502@snapithd.com> In-Reply-To: <521EBD9F.7070502@snapithd.com> (Chris Rodley's message of "Thu, 29 Aug 2013 15:18:55 +1200") MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Chris Rodley Cc: kernel@savoirfairelinux.com, linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org Chris Rodley writes: > Thanks Jerome! > > That was just what I needed to know. > The device is now set up and is working well - I will have a go at > back porting now. > > Many thanks again for your help! > Chris Good to know Chris! Note, we noticed that the sht15 driver may be sensible to noisy lines, we suspect a race condition around the interrupt handling code. If your sensor is populated on the board you shouldn't have problems though. Jerome _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors