From: Peter Korsgaard Date: Mon, 25 Apr 2016 16:14:08 +0200 Subject: [Buildroot] [PATCH 1/1] Preliminary support for Raspberry Pi 3 with symlink In-Reply-To: <81b71ac5323b1793405c3192b6ac5264@eja.it> (Ubaldo Porcheddu's message of "Mon, 25 Apr 2016 15:06:54 +0100") References: <1461442370-22393-1-git-send-email-ubaldo@eja.it> <871t5triwb.fsf@dell.be.48ers.dk> <81b71ac5323b1793405c3192b6ac5264@eja.it> Message-ID: <87shy9pyhb.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Ubaldo" == Ubaldo Porcheddu writes: > Hi Peter, > Il 2016-04-25 13:07 Peter Korsgaard ha scritto: >>>>>>> "Ubaldo" == Ubaldo Porcheddu writes: >> >> > Signed-off-by: Ubaldo Porcheddu >> >> Committed after expanding the commit message, thanks. >> >> I've also committed a change to sync the kernel version with what is >> used for rpi1/2 (E.G. the rpi-4.4.y branch). Care to verify that >> everything works correctly after that? > I just tested the new kernel version but it doesn't give me the login > prompt, the kernel seems to be booting fine as it can recognize my > keyboard but it doesn't accept any input. Hmm, odd. I do have a rpi1 at home. I'll try the 4.4 kernel on that one. So do I understand you correctly that you do see the kernel messages on the HDMI output but don't get a login prompt / nothing happens when you type on your USB keyboard. >> What about the serial console? The rpi3 afaik uses ttyS0 instead of >> ttyAMA0 for the (default) serial console. Do we need to adjust >> cmdline.txt for the rpi? >> >> I see notes about newer rpi-firmware versions fixing up ttyAMA0 -> >> ttyS0 >> when running on a rpi3, so perhaps it isn't needed? >> >> https://github.com/RPi-Distro/repo/issues/22 > I don't have a serial console cable to test with at the moment, but I > can see from the kernel log on screen a message like: > console [ttyS0] enabled Ok, sounds like it does the right thing then - Thanks! -- Venlig hilsen, Peter Korsgaard