From: cjb@laptop.org (Chris Ball) Date: Tue, 26 Nov 2013 16:37:29 -0500 Subject: [PATCH v2 0/6] mmc: sdhci-esdhc-imx: fix acmd23 unwork and ddr not supported on sabresd issues In-Reply-To: <1383142193-24950-1-git-send-email-b29396@freescale.com> (Dong Aisheng's message of "Wed, 30 Oct 2013 22:09:47 +0800") References: <1383142193-24950-1-git-send-email-b29396@freescale.com> Message-ID: <87siuig7za.fsf@octavius.laptop.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Dong, On Wed, Oct 30 2013, Dong Aisheng wrote: > Patch 1~3 fix acmd23 unwork issue. > Currently the eMMC chip integrated on i.MX6Q SabreSD boards does not work. > (It's easily reproduced once you enable usdhc4 on sabresd, see patch 3) > It's caused by acmd setting bits are never cleared once it's been set > which cause the next normal commands to work abnormally. > > Patch 4~6 fix DDR not supported on SabreSD board. > The SabreSD board does not have 1.8v signal voltage switch support for uSDHC, > thus it can not support UHS_DDR50 mode which can only run at 1.8v signal voltage. Thanks, pushed patches 1-6 to mmc-next for 3.14. - Chris. -- Chris Ball