From: cjb@laptop.org (Chris Ball) Date: Thu, 26 Sep 2013 07:57:43 -0400 Subject: [PATCH v2 0/9] mmc: sdhci-esdhc-imx: add SD3.0 support In-Reply-To: <20130926090158.GC21081@S2101-09.ap.freescale.net> (Shawn Guo's message of "Thu, 26 Sep 2013 17:02:00 +0800") References: <1379070698-7344-1-git-send-email-b29396@freescale.com> <87siws2ve7.fsf@octavius.laptop.org> <20130926090158.GC21081@S2101-09.ap.freescale.net> Message-ID: <87siwrre14.fsf@octavius.laptop.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Thu, Sep 26 2013, Shawn Guo wrote: > On Wed, Sep 25, 2013 at 10:01:52PM -0400, Chris Ball wrote: >> Hi Shawn, Sascha, >> >> On Fri, Sep 13 2013, Dong Aisheng wrote: >> > This patch series add SD3.0 support for i.MX6Q/DL. >> > Since freescale i.MX6Q/DL uSDHC clock tuning progress is a little >> > different from >> > the standard tuning process defined in host controller spec v3.0. >> > So we add a hook to allow execute platform specific tuning instead of >> > standard host controller tuning. >> > >> > The main difference are: >> > 1) not only generate Buffer Read Ready interrupt when tuning is performing. >> > It generates all other DATA interrupts like the normal data command. >> > 2) SDHCI_CTRL_EXEC_TUNING is not automatically cleared by HW, >> > instead it's controlled by SW. >> > 3) SDHCI_CTRL_TUNED_CLK is not automatically set by HW, >> > it's controlled by SW. >> > 4) the clock delay for every tuning is set by SW. >> > >> > Tested on i.MX6Q Sabreauto board. >> >> Please could someone ACK this series? Thanks, > > Acked-by: Shawn Guo > > One thing need to mention is that the series only adds support for > UHS SDR cards, and DDR cards haven't been working yet. Thanks, patches 1-8 pushed to mmc-next for 3.13 with Shawn's ACK. - Chris. -- Chris Ball