From: cjb@laptop.org (Chris Ball) Date: Wed, 25 Sep 2013 22:01:52 -0400 Subject: [PATCH v2 0/9] mmc: sdhci-esdhc-imx: add SD3.0 support In-Reply-To: <1379070698-7344-1-git-send-email-b29396@freescale.com> (Dong Aisheng's message of "Fri, 13 Sep 2013 19:11:29 +0800") References: <1379070698-7344-1-git-send-email-b29396@freescale.com> Message-ID: <87siws2ve7.fsf@octavius.laptop.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Shawn, Sascha, On Fri, Sep 13 2013, Dong Aisheng wrote: > This patch series add SD3.0 support for i.MX6Q/DL. > Since freescale i.MX6Q/DL uSDHC clock tuning progress is a little different from > the standard tuning process defined in host controller spec v3.0. > So we add a hook to allow execute platform specific tuning instead of > standard host controller tuning. > > The main difference are: > 1) not only generate Buffer Read Ready interrupt when tuning is performing. > It generates all other DATA interrupts like the normal data command. > 2) SDHCI_CTRL_EXEC_TUNING is not automatically cleared by HW, > instead it's controlled by SW. > 3) SDHCI_CTRL_TUNED_CLK is not automatically set by HW, > it's controlled by SW. > 4) the clock delay for every tuning is set by SW. > > Tested on i.MX6Q Sabreauto board. Please could someone ACK this series? Thanks, - Chris. -- Chris Ball