From: Peter Korsgaard Date: Tue, 20 Sep 2016 17:05:08 +0200 Subject: [Buildroot] [PATCH] configs/warp7: Add Wifi support In-Reply-To: (Fabio Estevam's message of "Tue, 20 Sep 2016 11:47:45 -0300") References: <1474314302-19064-1-git-send-email-festevam@gmail.com> <87bmzi3fxc.fsf@dell.be.48ers.dk> Message-ID: <87twda1ujf.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Fabio" == Fabio Estevam writes: > On Tue, Sep 20, 2016 at 9:37 AM, Peter Korsgaard wrote: >> We recently had a discussion about this .txt file in the context of >> rpi3. How specific to warp7 is this file? Is there some documentation > I just used the txt file provided in the NXP BSP. OK. >> somewhere explaining what all these settings do? > Unfortunately I don't see any explanation about it. :/ >>> @@ -0,0 +1,42 @@ >> > +# 2.4 GHz, 20 MHz BW mode >> > +manfid=0x2d0 >> > +prodid=0x0726 >> > +vendid=0x14e4 >> > +devid=0x43e2 >> > +boardtype=0x0726 >> > +boardrev=0x1202 >> > +boardnum=22 >> > +macaddr=00:90:4c:c5:12:38 >> >> Does this mean that all warp7 boards will use the same macaddr? This > No, the real MAC address I see is different from the one in the .txt file: Ahh, good. I wonder why it is then listed (twice even) in the .txt file. -- Venlig hilsen, Peter Korsgaard