From: Peter Korsgaard Date: Sun, 11 Mar 2018 22:22:44 +0100 Subject: [Buildroot] [PATCH] configs/freescale_t1040d4rdb_defconfig: new board In-Reply-To: <1520565006-48698-1-git-send-email-matthew.weber@rockwellcollins.com> (Matt Weber's message of "Thu, 8 Mar 2018 21:10:06 -0600") References: <1520565006-48698-1-git-send-email-matthew.weber@rockwellcollins.com> Message-ID: <87zi3e5mu3.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Matt" == Matt Weber writes: > The T1 QoriQ from NXP has had a few varients of RDB dev boards. > This target is against the latest D4RDB version. Any of the > other versions before D4RDB (plain RDB), may require backing off > the uboot version to SDK 1.6 and/or adjusting the kernel dtb used. > This board configuration provides an upstream kernel build which > has been verified to boot on target. > The target assumes the user still uses the NXP suggested prebuilts > in the SDK2.0 (last release for PowerPC). If a uboot rebuild is > required, the source for SDK2.0 can be found in the following repo. > http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703 > Signed-off-by: Matthew Weber Committed, thanks. -- Bye, Peter Korsgaard