From: Heiko Thiery Date: Thu, 12 Mar 2020 15:55:34 +0100 Subject: [Buildroot] [PATCH v3 1/3] package/linuxptp: make initscript options configurable In-Reply-To: References: <20200310080722.12742-1-heiko.thiery@gmail.com> <20200310080722.12742-2-heiko.thiery@gmail.com> Message-ID: <884ff863-b91b-ee8e-7531-a53a5f4de00f@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi Carlos, On 3/12/20 3:08 PM, Carlos Santos wrote: > On Thu, Mar 12, 2020 at 10:43 AM Carlos Santos wrote: >> >> On Tue, Mar 10, 2020 at 5:08 AM Heiko Thiery wrote: >>> >>> The "package/busybox/S01sysklogd" is taken as template to change the >>> init script of the linuxptp daemon. The init script is split two parts >>> because there are 2 daemons (ptp4l and phc2sys). >>> >>> Let the user supply its own options in /etc/default/ptp4l and >>> /etc/default/phc2sys. >>> >>> This patch also fixes an issue with the creation of the pid file that is >>> needed to properly stop the daemon again. >>> >>> Signed-off-by: Michael Walle >>> Signed-off-by: Heiko Thiery >> >> Tested-by: Carlos Santos >> --- >> Testes on an Intel C3000 device >> >> 02:00.0 Ethernet controller: Intel Corporation I210 Gigabit >> Network Connection (rev 03) >> >> after adding >> >> ==> /etc/default/phc2sys <== >> PHC2SYS_ARGS="-s enp2s0 -c CLOCK_REALTIME -w -S 1.0" >> >> ==> /etc/default/ptp4l <== >> PTP4L_ARGS="-i enp2s0 -f /etc/linuxptp.cfg -m" > > Hum, maybe it would be better just to use > > PHC2SYS_ARGS="-s /dev/ptp0 -c CLOCK_REALTIME -w -S 1.0" > What about doing the that: --- a/package/linuxptp/S66phc2sys +++ b/package/linuxptp/S66phc2sys @@ -7,7 +7,7 @@ DAEMON="phc2sys" PIDFILE="/var/run/$DAEMON.pid" -PHC2SYS_ARGS="-s eth0 -c CLOCK_REALTIME -w -S 1.0" +PHC2SYS_ARGS="-a -r -S 1.0" This will do an automatically configuration as default. -- Heiko