From: Joel Johnson Date: Sun, 22 Mar 2020 12:48:16 -0600 Subject: [PATCH v2 1/5] cmd: mvebu: bubt: add A38x support In-Reply-To: <20200129145013.125237-1-mrjoel@lixil.net> References: <20200129145013.125237-1-mrjoel@lixil.net> Message-ID: <888cc012c73ecee16907ce7336ab2119@lixil.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I just wanted to ping on this review (http://patchwork.ozlabs.org/project/uboot/list/?series=155850). I haven't seen any review feedback, so would like to check if it's agreeably in a state ready for merging in the next merge window or if there are issues. Thanks! Joel On 2020-01-29 07:50, Joel Johnson wrote: > Add support for Armada 38x devices in bubt flashing utility. > This is based on (and streamlined from) the support in the SolidRun > master-a38x vendor fork branch. > > Signed-off-by: Joel Johnson > > --- > > v2 changes > - none > > --- > cmd/mvebu/bubt.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 68 insertions(+), 1 deletion(-) > > diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c > index 2041a7a29a..d399fb6da4 100644 > --- a/cmd/mvebu/bubt.c > +++ b/cmd/mvebu/bubt.c > @@ -85,7 +85,29 @@ struct mvebu_image_info { > u32 encrypt_start_offset; > u32 encrypt_size; > }; > -#endif /* CONFIG_ARMADA_XXX */ > +#elif defined(CONFIG_ARMADA_38X) /* A38X */ > + > +/* Structure of the main header, version 1 (Armada 370/38x/XP) */ > +struct a38x_main_hdr_v1 { > + u8 blockid; /* 0x0 */ > + u8 flags; /* 0x1 */ > + u16 reserved2; /* 0x2-0x3 */ > + u32 blocksize; /* 0x4-0x7 */ > + u8 version; /* 0x8 */ > + u8 headersz_msb; /* 0x9 */ > + u16 headersz_lsb; /* 0xA-0xB */ > + u32 srcaddr; /* 0xC-0xF */ > + u32 destaddr; /* 0x10-0x13 */ > + u32 execaddr; /* 0x14-0x17 */ > + u8 options; /* 0x18 */ > + u8 nandblocksize; /* 0x19 */ > + u8 nandbadblklocation; /* 0x1A */ > + u8 reserved4; /* 0x1B */ > + u16 reserved5; /* 0x1C-0x1D */ > + u8 ext; /* 0x1E */ > + u8 checksum; /* 0x1F */ > +}; > +#endif > > struct bubt_dev { > char name[8]; > @@ -621,7 +643,52 @@ static int check_image_header(void) > > return 0; > } > +#elif defined(CONFIG_ARMADA_38X) > +static size_t a38x_header_size(const struct a38x_main_hdr_v1 *h) > +{ > + if (h->version == 1) > + return (h->headersz_msb << 16) | le16_to_cpu(h->headersz_lsb); > + > + printf("Error: Invalid A38x image (header version 0x%x unknown)!\n", > + h->version); > + return 0; > +} > + > +static uint8_t image_checksum8(const void *start, size_t len) > +{ > + u8 csum = 0; > + const u8 *p = start; > + > + while (len) { > + csum += *p; > + ++p; > + --len; > + } > + > + return csum; > +} > > +static int check_image_header(void) > +{ > + u8 checksum; > + const struct a38x_main_hdr_v1 *hdr = > + (struct a38x_main_hdr_v1 *)get_load_addr(); > + const size_t image_size = a38x_header_size(hdr); > + > + if (!image_size) > + return -ENOEXEC; > + > + checksum = image_checksum8(hdr, image_size); > + checksum -= hdr->checksum; > + if (checksum != hdr->checksum) { > + printf("Error: Bad A38x image checksum. 0x%x != 0x%x\n", > + checksum, hdr->checksum); > + return -ENOEXEC; > + } > + > + printf("Image checksum...OK!\n"); > + return 0; > +} > #else /* Not ARMADA? */ > static int check_image_header(void) > {