From: =?UTF-8?Q?S=c3=b6ren_Moch?= Subject: Re: [PATCH 3/3] arm64: dts: rk3399: Add init voltage for vdd_log Date: Tue, 12 Nov 2019 09:44:57 +0100 Message-ID: <88ad7dc9-5299-791b-e285-7775ddf885ba@web.de> References: <20191111005158.25070-1-kever.yang@rock-chips.com> <20191111005158.25070-3-kever.yang@rock-chips.com> <1eaef5d5-c923-da56-b9c4-48d517b3c969@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: Content-Language: en-GB Sender: linux-kernel-owner@vger.kernel.org To: Markus Reichl , Kever Yang , heiko@sntech.de Cc: Mark Rutland , =?UTF-8?Q?Andrius_=c5=a0tikonas?= , linux-kernel@vger.kernel.org, Alexis Ballier , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Katsuhiro Suzuki , Hugh Cole-Baker , Elaine Zhang , Andy Yan , Robin Murphy , Vicente Bergas , Oskari Lemmela , linux-rockchip@lists.infradead.org, Rob Herring , Pragnesh Patel , Peter Robinson , Nick Xie , Ezequiel Garcia , Vivek Unune List-Id: linux-rockchip.vger.kernel.org On 12.11.19 09:16, Markus Reichl wrote: > Hi Kever, > > have a rk3399-roc-pc running mainline U-Boot and kernel and vdd_log is > showing 1118 mV. > Is this a danger for the board? I think yes. What I read vdd_log on rk3399 must not exceed 1.0V. > How to fix it? You probably need to do something like [1]. [1] https://patchwork.kernel.org/patch/11173465/ Gru=C3=9F, S=C3=B6ren > Btw. vin-supply for this pwm-regulator is ignored and I could not find i= t > in bindings doc. > > Gru=C3=9F,