Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 99ACDCD6E7C for ; Fri, 5 Jun 2026 19:05:11 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 8BFAE849BD; Fri, 5 Jun 2026 21:05:09 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.b="oPQZsQhX"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id B4C17849CA; Fri, 5 Jun 2026 21:05:07 +0200 (CEST) Received: from mail-ed1-x52c.google.com (mail-ed1-x52c.google.com [IPv6:2a00:1450:4864:20::52c]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 69FB2848A1 for ; Fri, 5 Jun 2026 21:05:03 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=jbx6244@gmail.com Received: by mail-ed1-x52c.google.com with SMTP id 4fb4d7f45d1cf-68cebdc1723so322768a12.1 for ; Fri, 05 Jun 2026 12:05:03 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1780686303; x=1781291103; darn=lists.denx.de; h=content-transfer-encoding:content-language:cc:to:subject:from :user-agent:mime-version:date:message-id:from:to:cc:subject:date :message-id:reply-to; bh=zcyBy01huvdvfw48Zt+EmCWidR4l+2+2ECQixfbXyMc=; b=oPQZsQhXLoLrVxk1Vyc/KPR7fzzbv8NbWUaNkx/ah6YXvVcQHmioLS6AgUFBxHy8oI mM0GtjjdLQOWdtLoDqSzOXb5z9QKxd7MWMOKVB7ZgKUJaC4ELjt3BHHmVnj2ZmvGwfdO eSo+DfJib+yi5eDBSfzkYJxaZEN3UrVCJicoWahd9ocUuenmtcV240FF6Li7Mp+pQTBI s9YGOb+AZ3zN9BvfqNdhQdHAi0DGJEZEJQipjRYwowN7QfLnxWHqVTcw6Hf/Q4mkObfA VOs/EOou7Ftp922JbmWhi651lOUQlNKvrchnkM9gXysvYnRESIkBIj5Gcifat/f3dVdc tXhA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1780686303; x=1781291103; h=content-transfer-encoding:content-language:cc:to:subject:from :user-agent:mime-version:date:message-id:x-gm-gg:x-gm-message-state :from:to:cc:subject:date:message-id:reply-to; bh=zcyBy01huvdvfw48Zt+EmCWidR4l+2+2ECQixfbXyMc=; b=BDi3j5NRiY8vTYPaAqY36ZFpxkXALSiY8vggJWnhUwMwhav7r/yWGU/COAt2X53KSh 4DNzsTVPR2q4+5LdVRMDrlzwprpJQwaecQrDCBqiw1JLqSqtlPl6KvfwNfRF33gn4mqw GrBM1hEs3Lz3FvnKyfk67/JtyS5sQlvCsgrHygRgpuvjzic8nPwRMt763YJAU4ds5gpJ v7pwsuSetPiAxn81iCJoHG+ZTTifj8OJ8yewj9dQWtlpdqQvQyXVr7DUJvJrAP8RDozd yPWtYPhceBhz0A3AR6fo4HCaS8YdHGtX7xnWDmaH1H/iv0iD6SeMQZ5F+tmUg2OeTprz yz2Q== X-Forwarded-Encrypted: i=1; AFNElJ/qkQbuIDkRQQc1aHBCAHpBqgUt8zlvs/O4bJ514CvN2R2TW7WjXEF6De/p3TRfq6tGf4yvleI=@lists.denx.de X-Gm-Message-State: AOJu0YySvKPYVoB0AoBdRe8107C681Opwops1fD38LRj/3tXZqPeB9pV cYEpz1pD/F9Kev09QafTSZuxfAyNICK/kgjg+uBTIpjOkpTjo+m7qLSH X-Gm-Gg: Acq92OGURoPVoP5C4pLLU9c5JWhibWHB2QRU2gG0ubd2vyIouMFEuU7GcPXsXbUcXmn Ocxkopk4KX7Th+/7SfISrVj+NJXl2aMdFHPw27sGw+vP2ZERZHli3/GaC9MwsY2LDukoK/ipZdB PfmG0Q6GV9SFdWO3bX4TVefGpokdAtZQ9h2e/dwNMJkCIZVvQvtoRmEbRtlSryqvpZMgD+T+2Y8 pu4anhLwWWoGJFjZcAUDSNA2coW4bxf47hjQupINDgvRZhlSQV9dzz4EHKH8had0+V4nsKBav+r NoOWhkmMjff0OW9orVp0wQ5tCU4plEL7LxqmjG+EU8ffxLg7ilhm87TfYkorDxewESaHusF+ZqJ 9xil5qD4xHb9Jf/EZMo7FLCwKX53CdqBOU2iUHDxACNaOf9AII5WyKFUvIetYGBOcwyoBlJL0fg iDlIKiBHMt1eYIeD6YBk1EGaw9W8f5JRXN6NW84FNXb+GDISAeIVV2bOGyhpzag+g/4nRx+puKY 7H2rrSJWAw= X-Received: by 2002:a05:6402:5243:b0:689:ac19:3fb4 with SMTP id 4fb4d7f45d1cf-68fa4c16bf6mr1370615a12.1.1780686301736; Fri, 05 Jun 2026 12:05:01 -0700 (PDT) Received: from ?IPV6:2a02:a449:4071:0:32d0:42ff:fe10:6983? ([2a02:a449:4071:0:32d0:42ff:fe10:6983]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-bf051e9aa33sm502235966b.24.2026.06.05.12.04.59 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Fri, 05 Jun 2026 12:05:01 -0700 (PDT) Message-ID: <89147ab9-5167-4be0-818f-30e2b39021ec@gmail.com> Date: Fri, 5 Jun 2026 21:04:58 +0200 MIME-Version: 1.0 User-Agent: Mozilla Thunderbird From: Johan Jonker Subject: [PATCH v1] Kconfig: replace deprecated help word To: trini@konsulko.com Cc: kever.yang@rock-chips.com, sjg@chromium.org, philipp.tomsich@vrull.eu, andre.przywara@arm.com, daniel.schwierzeck@gmail.com, hs@nabladev.com, jerome.forissier@arm.com, jh80.chung@samsung.com, peng.fan@nxp.com, mateusz.kulikowski@gmail.com, marex@denx.de, ag.dev.uboot@gmail.com, u-boot@lists.denx.de Content-Language: en-US, ar-EG Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Replace deprecated help word. Signed-off-by: Johan Jonker --- find . -name 'Kconfig' -exec sed -i -e 's/---help---/help/g' {} \; --- arch/arm/cpu/armv7/Kconfig | 8 +- arch/arm/mach-rockchip/Kconfig | 2 +- arch/arm/mach-sunxi/Kconfig | 126 ++++++++++++++++---------------- arch/mips/Kconfig | 2 +- drivers/gpio/Kconfig | 2 +- drivers/i2c/Kconfig | 2 +- drivers/net/phy/Kconfig | 8 +- drivers/power/Kconfig | 80 ++++++++++---------- drivers/power/pmic/Kconfig | 58 +++++++-------- drivers/power/regulator/Kconfig | 58 +++++++-------- drivers/spmi/Kconfig | 6 +- drivers/usb/Kconfig | 10 +-- drivers/usb/eth/Kconfig | 16 ++-- drivers/usb/host/Kconfig | 44 +++++------ drivers/usb/musb-new/Kconfig | 2 +- drivers/video/Kconfig | 20 ++--- 16 files changed, 222 insertions(+), 222 deletions(-) diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig index 3a3c1784e188..0f4018c709ba 100644 --- a/arch/arm/cpu/armv7/Kconfig +++ b/arch/arm/cpu/armv7/Kconfig @@ -13,14 +13,14 @@ config ARMV7_NONSEC bool "Enable support for booting in non-secure mode" if EXPERT depends on CPU_V7_HAS_NONSEC default y - ---help--- + help Say Y here to enable support for booting in non-secure / SVC mode. config ARMV7_BOOT_SEC_DEFAULT bool "Boot in secure mode by default" if EXPERT depends on ARMV7_NONSEC default y if ARCH_TEGRA - ---help--- + help Say Y here to boot in secure mode by default even if non-secure mode is supported. This option is useful to boot kernels which do not suppport booting in non-secure mode. Only set this if you need it. @@ -74,7 +74,7 @@ config ARMV7_VIRT bool "Enable support for hardware virtualization" if EXPERT depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC default y - ---help--- + help Say Y here to boot in hypervisor (HYP) mode when booting non-secure. config ARMV7_PSCI @@ -115,7 +115,7 @@ config ARMV7_LPAE bool "Use LPAE page table format" if EXPERT depends on CPU_V7A default y if ARMV7_VIRT - ---help--- + help Say Y here to use the long descriptor page table format. This is required if U-Boot runs in HYP mode. diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 108713488af1..2f3dea494f74 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -659,7 +659,7 @@ config ROCKCHIP_BOOT_MODE_REG config ROCKCHIP_RK8XX_DISABLE_BOOT_ON_POWERON bool "Disable device boot on power plug-in" depends on PMIC_RK8XX - ---help--- + help Say Y here to prevent the device from booting up because of a plug-in event. When set, the device will boot briefly to determine why it was powered on, and if it was determined because of a plug-in event diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index ceba96b61a5c..bc35625b4383 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -223,7 +223,7 @@ config SUNXI_SRAM_ADDRESS default 0x44000 if MACH_SUN55I_A523 default 0x20000 if SUN50I_GEN_H6 || SUNXI_GEN_NCAT2 default 0x0 - ---help--- + help Older Allwinner SoCs have their mask boot ROM mapped just below 4GB, with the first SRAM region being located at address 0. Some newer SoCs map the boot ROM at address 0 instead and move the @@ -236,7 +236,7 @@ config SUNXI_RVBAR_ADDRESS default 0x08000040 if MACH_SUN55I_A523 default 0x09010040 if SUN50I_GEN_H6 default 0x017000a0 - ---help--- + help The read-only RVBAR system register holds the address of the first instruction to execute after a reset. Allwinner cores provide a writable MMIO backing store for this register, to allow to set the @@ -248,7 +248,7 @@ config SUNXI_RVBAR_ALTERNATIVE depends on ARM64 default 0x08100040 if MACH_SUN50I_H616 default SUNXI_RVBAR_ADDRESS - ---help--- + help The H616 die exists in at least two variants, with one having the RVBAR registers at a different address. If the SoC variant ID (stored in SRAM_VER_REG[7:0]) is not 0, we need to use the @@ -282,13 +282,13 @@ config SUNXI_A64_TIMER_ERRATUM # not supported by Kconfig config SUNXI_GEN_SUN4I bool - ---help--- + help Select this for sunxi SoCs which have resets and clocks set up as the original A10 (mach-sun4i). config SUNXI_GEN_SUN6I bool - ---help--- + help Select this for sunxi SoCs which have sun6i like periphery, like separate ahb reset control registers, custom pmic bus, new style watchdog, etc. @@ -299,7 +299,7 @@ config SUN50I_GEN_H6 select SPL_LOAD_FIT if SPL select MMC_SUNXI_HAS_NEW_MODE select SUPPORT_SPL - ---help--- + help Select this for sunxi SoCs which have H6 like peripherals, clocks and memory map. @@ -307,13 +307,13 @@ config SUNXI_GEN_NCAT2 bool select MMC_SUNXI_HAS_NEW_MODE select SUPPORT_SPL - ---help--- + help Select this for sunxi SoCs which have D1 like peripherals, clocks and memory map. config SUNXI_DRAM_DW bool - ---help--- + help Select this for sunxi SoCs which uses a DRAM controller like the DesignWare controller used in H3, mainly SoCs after H3, which do not have official open-source DRAM initialization code, but can @@ -322,13 +322,13 @@ config SUNXI_DRAM_DW if SUNXI_DRAM_DW config SUNXI_DRAM_DW_16BIT bool - ---help--- + help Select this for sunxi SoCs with DesignWare DRAM controller and have only 16-bit memory buswidth. config SUNXI_DRAM_DW_32BIT bool - ---help--- + help Select this for sunxi SoCs with DesignWare DRAM controller with 32-bit memory buswidth. endif @@ -576,7 +576,7 @@ config MACH_SUN8I config RESERVE_ALLWINNER_BOOT0_HEADER bool "reserve space for Allwinner boot0 header" select ENABLE_ARM_SOC_BOOT0_HOOK - ---help--- + help Prepend a 1536 byte (empty) header to the U-Boot image file, to be filled with magic values post build. The Allwinner provided boot0 blob relies on this information to load and execute U-Boot. @@ -587,7 +587,7 @@ config ARM_BOOT_HOOK_RMR depends on ARM64 default y select ENABLE_ARM_SOC_BOOT0_HOOK - ---help--- + help Insert some ARM32 code at the very beginning of the U-Boot binary which uses an RMR register write to bring the core into AArch64 mode. The very first instruction acts as a switch, since it's carefully @@ -622,7 +622,7 @@ config SUNXI_DRAM_DDR3_1333 bool "DDR3 1333" select SUNXI_DRAM_DDR3 depends on !DRAM_SUN50I_A133 - ---help--- + help This option is the original only supported memory type, which suits many H3/H5/A64 boards available now. @@ -630,7 +630,7 @@ config SUNXI_DRAM_LPDDR3_STOCK bool "LPDDR3 with Allwinner stock configuration" select SUNXI_DRAM_LPDDR3 depends on !DRAM_SUN50I_A133 - ---help--- + help This option is the LPDDR3 timing used by the stock boot0 by Allwinner. @@ -638,7 +638,7 @@ config SUNXI_DRAM_H6_LPDDR3 bool "LPDDR3 DRAM chips on the H6 DRAM controller" select SUNXI_DRAM_LPDDR3 depends on DRAM_SUN50I_H6 - ---help--- + help This option is the LPDDR3 timing used by the stock boot0 by Allwinner. @@ -646,7 +646,7 @@ config SUNXI_DRAM_H6_DDR3_1333 bool "DDR3-1333 boot0 timings on the H6 DRAM controller" select SUNXI_DRAM_DDR3 depends on DRAM_SUN50I_H6 - ---help--- + help This option is the DDR3 timing used by the boot0 on H6 TV boxes which use a DDR3-1333 timing. @@ -694,7 +694,7 @@ config SUNXI_DRAM_DDR2_V3S bool "DDR2 found in V3s chip" select SUNXI_DRAM_DDR2 depends on MACH_SUN8I_V3S - ---help--- + help This option is only for the DDR2 memory chip which is co-packaged in Allwinner V3s SoC. @@ -720,7 +720,7 @@ config DRAM_TYPE int "sunxi dram type" depends on MACH_SUN8I_A83T default 3 - ---help--- + help Set the dram type, 3: DDR3, 7: LPDDR3 config DRAM_CLK @@ -734,7 +734,7 @@ config DRAM_CLK default 744 if MACH_SUN50I_H6 default 720 if MACH_SUN50I_H616 || MACH_SUN50I_A133 default 1200 if MACH_SUN55I_A523 - ---help--- + help Set the dram clock speed, valid range 240 - 480 (prior to sun9i), must be a multiple of 24. For the sun9i (A80), the tested values (for DDR3-1600) are 312 to 792. @@ -743,7 +743,7 @@ if MACH_SUN5I || MACH_SUN7I config DRAM_MBUS_CLK int "sunxi mbus clock speed" default 300 - ---help--- + help Set the mbus clock speed. The maximum on sun5i hardware is 300MHz. endif @@ -760,7 +760,7 @@ config DRAM_ZQ default 3881979 if MACH_SUNXI_H3_H5 || MACH_SUN8I_R40 || MACH_SUN50I_H6 default 4145117 if MACH_SUN9I default 3881915 if MACH_SUN50I - ---help--- + help Set the dram zq value. config DRAM_ODT_EN @@ -772,7 +772,7 @@ config DRAM_ODT_EN default y if MACH_SUN8I_R40 default y if MACH_SUN50I default y if MACH_SUN50I_H6 - ---help--- + help Select this to enable dram odt (on die termination). if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I @@ -780,13 +780,13 @@ config DRAM_EMR1 int "sunxi dram emr1 value" default 0 if MACH_SUN4I default 4 if MACH_SUN5I || MACH_SUN7I - ---help--- + help Set the dram controller emr1 value. config DRAM_TPR3 hex "sunxi dram tpr3 value" default 0x0 - ---help--- + help Set the dram controller tpr3 parameter. This parameter configures the delay on the command lane and also phase shifts, which are applied for sampling incoming read data. The default value 0 @@ -797,7 +797,7 @@ config DRAM_TPR3 config DRAM_DQS_GATING_DELAY hex "sunxi dram dqs_gating_delay value" default 0x0 - ---help--- + help Set the dram controller dqs_gating_delay parmeter. Each byte encodes the DQS gating delay for each byte lane. The delay granularity is 1/4 cycle. For example, the value 0x05060606 @@ -813,17 +813,17 @@ config DRAM_DQS_GATING_DELAY choice prompt "sunxi dram timings" default DRAM_TIMINGS_VENDOR_MAGIC - ---help--- + help Select the timings of the DDR3 chips. config DRAM_TIMINGS_VENDOR_MAGIC bool "Magic vendor timings from Android" - ---help--- + help The same DRAM timings as in the Allwinner boot0 bootloader. config DRAM_TIMINGS_DDR3_1066F_1333H bool "JEDEC DDR3-1333H with down binning to DDR3-1066F" - ---help--- + help Use the timings of the standard JEDEC DDR3-1066F speed bin for DRAM_CLK <= 533MHz and the timings of the DDR3-1333H speed bin for DRAM_CLK > 533MHz. This covers the majority of DDR3 chips @@ -834,7 +834,7 @@ config DRAM_TIMINGS_DDR3_1066F_1333H config DRAM_TIMINGS_DDR3_800E_1066G_1333J bool "JEDEC DDR3-800E / DDR3-1066G / DDR3-1333J" - ---help--- + help Use the timings of the slowest possible JEDEC speed bin for the selected DRAM_CLK. Depending on the DRAM_CLK value, it may be DDR3-800E, DDR3-1066G or DDR3-1333J. @@ -847,7 +847,7 @@ if MACH_SUN8I_A23 config DRAM_ODT_CORRECTION int "sunxi dram odt correction value" default 0 - ---help--- + help Set the dram odt correction value (range -255 - 255). In allwinner fex files, this option is found in bits 8-15 of the u32 odt_en variable in the [dram] section. When bit 31 of the odt_en variable is set @@ -888,7 +888,7 @@ config SUNXI_MINIMUM_DRAM_MB default 32 if MACH_SUNIV default 64 if MACH_SUN8I_V3S default 256 - ---help--- + help Minimum DRAM size expected on the board. Traditionally we assumed 256 MB, so that U-Boot would load at 160MB. With co-packaged DRAM we have smaller sizes, though, so that U-Boot's own load address and @@ -897,7 +897,7 @@ config SUNXI_MINIMUM_DRAM_MB config UART0_PORT_F bool "UART0 on MicroSD breakout board" - ---help--- + help Repurpose the SD card slot for getting access to the UART0 serial console. Primarily useful only for low level u-boot debugging on tablets, where normal UART0 is difficult to access and requires @@ -907,20 +907,20 @@ config UART0_PORT_F config OLD_SUNXI_KERNEL_COMPAT bool "Enable workarounds for booting old kernels" - ---help--- + help Set this to enable various workarounds for old kernels, this results in sub-optimal settings for newer kernels, only enable if needed. config MMC1_PINS_PH bool "Pins for mmc1 are on Port H" depends on MACH_SUN4I || MACH_SUN7I || MACH_SUN8I_R40 - ---help--- + help Select this option for boards where mmc1 uses the Port H pinmux. config MMC_SUNXI_SLOT_EXTRA int "mmc extra slot number" default -1 - ---help--- + help sunxi builds always enable mmc0, some boards also have a second sdcard slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable support for this. @@ -930,7 +930,7 @@ config I2C0_ENABLE default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_R40 default n if MACH_SUN6I || MACH_SUN8I select CMD_I2C - ---help--- + help This allows enabling I2C/TWI controller 0 by muxing its pins, enabling its clock and setting up the bus. This is especially useful on devices with slaves connected to the bus or with pins exposed through e.g. an @@ -939,7 +939,7 @@ config I2C0_ENABLE config I2C1_ENABLE bool "Enable I2C/TWI controller 1" select CMD_I2C - ---help--- + help See I2C0_ENABLE help text. if SUNXI_GEN_SUN6I || SUN50I_GEN_H6 || SUNXI_GEN_NCAT2 @@ -948,20 +948,20 @@ config R_I2C_ENABLE # This is used for the pmic on H3 default y if SY8106A_POWER select CMD_I2C - ---help--- + help Set this to y to enable the I2C controller which is part of the PRCM. endif config AXP_GPIO bool "Enable support for gpio-s on axp PMICs" depends on AXP_PMIC_BUS - ---help--- + help Say Y here to enable support for the gpio pins of the axp PMIC ICs. config AXP_DISABLE_BOOT_ON_POWERON bool "Disable device boot on power plug-in" depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER - ---help--- + help Say Y here to prevent the device from booting up because of a plug-in event. When set, the device will boot into the SPL briefly to determine why it was powered on, and if it was determined because of @@ -982,7 +982,7 @@ config VIDEO_SUNXI imply VIDEO_DAMAGE imply VIDEO_DT_SIMPLEFB default y - ---help--- + help Say Y here to add support for using a graphical console on the HDMI, LCD or VGA output found on older sunxi devices. This will also provide a simple_framebuffer device for Linux. @@ -991,19 +991,19 @@ config VIDEO_HDMI bool "HDMI output support" depends on VIDEO_SUNXI && !MACH_SUN8I && !MACH_SUNIV default y - ---help--- + help Say Y here to add support for outputting video over HDMI. config VIDEO_VGA bool "VGA output support" depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN7I) - ---help--- + help Say Y here to add support for outputting video over VGA. config VIDEO_VGA_VIA_LCD bool "VGA via LCD controller support" depends on VIDEO_SUNXI && (MACH_SUN5I || MACH_SUN6I || MACH_SUN8I) - ---help--- + help Say Y here to add support for external DACs connected to the parallel LCD interface driving a VGA connector, such as found on the Olimex A13 boards. @@ -1011,7 +1011,7 @@ config VIDEO_VGA_VIA_LCD config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH bool "Force sync active high for VGA via LCD controller support" depends on VIDEO_VGA_VIA_LCD - ---help--- + help Say Y here if you've a board which uses opendrain drivers for the vga hsync and vsync signals. Opendrain drivers cannot generate steep enough positive edges for a stable video output, so on boards with opendrain @@ -1021,21 +1021,21 @@ config VIDEO_VGA_EXTERNAL_DAC_EN string "LCD panel power enable pin" depends on VIDEO_VGA_VIA_LCD default "" - ---help--- + help Set the enable pin for the external VGA DAC. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. config VIDEO_COMPOSITE bool "Composite video output support" depends on VIDEO_SUNXI && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) - ---help--- + help Say Y here to add support for outputting composite video. config VIDEO_LCD_MODE string "LCD panel timing details" depends on VIDEO_SUNXI default "" - ---help--- + help LCD panel timing details string, leave empty if there is no LCD panel. This is in drivers/video/videomodes.c: video_get_params() format, e.g. x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0 @@ -1046,14 +1046,14 @@ config VIDEO_LCD_DCLK_PHASE depends on VIDEO_SUNXI || VIDEO default 1 range 0 3 - ---help--- + help Select LCD panel display clock phase shift config VIDEO_LCD_POWER string "LCD panel power enable pin" depends on VIDEO_SUNXI default "" - ---help--- + help Set the power enable pin for the LCD panel. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. @@ -1061,7 +1061,7 @@ config VIDEO_LCD_RESET string "LCD panel reset pin" depends on VIDEO_SUNXI default "" - ---help--- + help Set the reset pin for the LCD panel. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. @@ -1069,7 +1069,7 @@ config VIDEO_LCD_BL_EN string "LCD panel backlight enable pin" depends on VIDEO_SUNXI default "" - ---help--- + help Set the backlight enable pin for the LCD panel. This takes a string in the the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. @@ -1078,7 +1078,7 @@ config VIDEO_LCD_BL_PWM string "LCD panel backlight pwm pin" depends on VIDEO_SUNXI default "" - ---help--- + help Set the backlight pwm pin for the LCD panel. This takes a string in the format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H. @@ -1086,14 +1086,14 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW bool "LCD panel backlight pwm is inverted" depends on VIDEO_SUNXI default y - ---help--- + help Set this if the backlight pwm output is active low. config VIDEO_LCD_PANEL_I2C bool "LCD panel needs to be configured via i2c" depends on VIDEO_SUNXI select DM_I2C_GPIO - ---help--- + help Say y here if the LCD panel needs to be configured via i2c. This will add a bitbang i2c controller using gpios to talk to the LCD. @@ -1101,7 +1101,7 @@ config VIDEO_LCD_PANEL_I2C_NAME string "LCD panel i2c interface node name" depends on VIDEO_LCD_PANEL_I2C default "i2c" - ---help--- + help Set the device tree node name for the LCD i2c interface. # Note only one of these may be selected at a time! But hidden choices are @@ -1123,7 +1123,7 @@ config VIDEO_DE2 select VIDEO_DW_HDMI imply VIDEO_DT_SIMPLEFB default y - ---help--- + help Say y here if you want to build DE2 video driver which is present on newer SoCs. Currently only HDMI output is supported. @@ -1131,7 +1131,7 @@ config VIDEO_DE2 choice prompt "LCD panel support" depends on VIDEO_SUNXI - ---help--- + help Select which type of LCD panel to support. config VIDEO_LCD_PANEL_PARALLEL @@ -1146,7 +1146,7 @@ config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828 bool "MIPI 4-lane, 513Mbps LCD panel via SSD2828 bridge chip" select VIDEO_LCD_SSD2828 select VIDEO_LCD_IF_PARALLEL - ---help--- + help 7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0 config VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 @@ -1154,7 +1154,7 @@ config VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804 select VIDEO_LCD_ANX9804 select VIDEO_LCD_IF_PARALLEL select VIDEO_LCD_PANEL_I2C - ---help--- + help Select this for eDP LCD panels with 4 lanes running at 1.62G, connected via an ANX9804 bridge chip. @@ -1162,14 +1162,14 @@ config VIDEO_LCD_PANEL_HITACHI_TX18D42VM bool "Hitachi tx18d42vm LCD panel" select VIDEO_LCD_HITACHI_TX18D42VM select VIDEO_LCD_IF_LVDS - ---help--- + help 7.85" 1024x768 Hitachi tx18d42vm LCD panel support config VIDEO_LCD_TL059WV5C0 bool "tl059wv5c0 LCD panel" select VIDEO_LCD_PANEL_I2C select VIDEO_LCD_IF_PARALLEL - ---help--- + help 6" 480x800 tl059wv5c0 panel support, as used on the Utoo P66 and Aigo M60/M608/M606 tablets. @@ -1178,7 +1178,7 @@ endchoice config GMAC_TX_DELAY int "GMAC Transmit Clock Delay Chain" default 0 - ---help--- + help Set the GMAC Transmit Clock Delay Chain value. config SPL_STACK_R_ADDR diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 36612756294b..b23357440cd5 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -351,7 +351,7 @@ config MIPS_RELOCATION_TABLE_SIZE range 0x100 0x10000 default "0xc000" if TARGET_MALTA default "0x8000" - ---help--- + help A table of relocation data will be appended to the U-Boot binary and parsed in relocate_code() to fix up all offsets in the relocated U-Boot. diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 0b5466b39b8d..a824c7948eee 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -459,7 +459,7 @@ config SUNXI_GPIO config SUNXI_NEW_PINCTRL bool depends on SUNXI_GPIO - ---help--- + help The Allwinner D1 and other new SoCs use a different register map for the GPIO block, which we need to know about in the SPL. diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 55465dc1d463..306a7aa0d041 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -110,7 +110,7 @@ config I2C_CROS_EC_TUNNEL config I2C_CROS_EC_LDO bool "Provide access to LDOs on the Chrome OS EC" depends on CROS_EC - ---help--- + help On many Chromebooks the main PMIC is inaccessible to the AP. This is often dealt with by using an I2C pass-through interface provided by the EC. On some unfortunate models (e.g. Spring) the pass-through diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 0025c895f125..864b5aed2085 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -317,13 +317,13 @@ config PHY_TERANETICS config PHY_TI bool "Texas Instruments Ethernet PHYs support" - ---help--- + help Adds PHY registration support for TI PHYs. config PHY_TI_DP83867 select PHY_TI bool "Texas Instruments Ethernet DP83867 PHY support" - ---help--- + help Adds support for the TI DP83867 1Gbit PHY. config SPL_PHY_TI_DP83867 @@ -333,13 +333,13 @@ config SPL_PHY_TI_DP83867 config PHY_TI_DP83869 select PHY_TI bool "Texas Instruments Ethernet DP83869 PHY support" - ---help--- + help Adds support for the TI DP83869 1Gbit PHY. config PHY_TI_GENERIC select PHY_TI bool "Texas Instruments Generic Ethernet PHYs support" - ---help--- + help Adds support for Generic TI PHYs that don't need special handling but the PHY name is associated with a PHY ID. diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 1b06d8a66c7c..2f924927c299 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -63,7 +63,7 @@ choice config SUNXI_NO_PMIC bool "board without a pmic" - ---help--- + help Select this for boards which do not use a PMIC. config AXP152_POWER @@ -71,7 +71,7 @@ config AXP152_POWER depends on MACH_SUN5I select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Select this to enable support for the axp152 pmic found on most A10s boards. @@ -80,7 +80,7 @@ config AXP209_POWER depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_V3S select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Select this to enable support for the axp209 pmic found on most A10, A13 and A20 boards. @@ -89,7 +89,7 @@ config AXP221_POWER depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Select this to enable support for the axp221/axp223 pmic found on most A23 and A31 boards. @@ -98,7 +98,7 @@ config AXP305_POWER depends on MACH_SUN50I_H616 select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Select this to enable support for the axp305 pmic found on most H616 boards. @@ -107,7 +107,7 @@ config AXP313_POWER depends on MACH_SUN50I_H616 select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Select this to enable support for the AXP313 PMIC found on some H616 boards. @@ -115,13 +115,13 @@ config AXP717_POWER bool "axp717 pmic support" select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Select this to enable support for the AXP717 PMIC found on some boards. config AXP803_POWER bool "AXP803 PMIC support" select AXP_PMIC_BUS - ---help--- + help Select this to enable support for the AXP803 PMIC found on some boards. config AXP809_POWER @@ -129,7 +129,7 @@ config AXP809_POWER depends on MACH_SUN9I select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Say y here to enable support for the axp809 pmic found on A80 boards. config AXP818_POWER @@ -137,7 +137,7 @@ config AXP818_POWER depends on MACH_SUN8I_A83T select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Say y here to enable support for the axp818 pmic found on A83T dev board. @@ -145,14 +145,14 @@ config AXP318W_POWER bool "axp318w pmic support" select AXP_PMIC_BUS select CMD_POWEROFF - ---help--- + help Select this to enable support for the AXP318W PMIC found on some A733 boards. config SY8106A_POWER bool "SY8106A pmic support" depends on MACH_SUNXI_H3_H5 - ---help--- + help Select this to enable support for the SY8106A pmic found on some H3 boards. @@ -166,7 +166,7 @@ config AXP_I2C_ADDRESS default 0x36 if AXP318W_POWER default 0x30 if AXP152_POWER default 0x34 - ---help--- + help I2C address of the AXP PMIC, used for the SPL only. config AXP_DCDC1_VOLT @@ -174,7 +174,7 @@ config AXP_DCDC1_VOLT depends on AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP803_POWER default 3300 if AXP818_POWER || MACH_SUN8I_R40 || AXP803_POWER default 3000 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I - ---help--- + help Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for generic 3.3V IO voltage for external devices like the lcd-panal and @@ -194,7 +194,7 @@ config AXP_DCDC2_VOLT default 1200 if MACH_SUN6I default 1100 if MACH_SUN8I default 0 if MACH_SUN9I - ---help--- + help Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to disable dcdc2. On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V. @@ -214,7 +214,7 @@ config AXP_DCDC3_VOLT default 1100 if AXP313_POWER default 1100 if MACH_SUN8I_R40 default 1200 if MACH_SUN6I || MACH_SUN8I - ---help--- + help Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to disable dcdc3. On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and @@ -235,7 +235,7 @@ config AXP_DCDC4_VOLT default 0 if MACH_SUN8I default 900 if MACH_SUN9I default 1500 if AXP305_POWER - ---help--- + help Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to disable dcdc4. On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V. @@ -249,7 +249,7 @@ config AXP_DCDC5_VOLT int "axp pmic dcdc5 voltage" depends on AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP803_POWER default 1500 if MACH_SUN6I || MACH_SUN8I || MACH_SUN9I - ---help--- + help Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to disable dcdc5. On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and @@ -261,7 +261,7 @@ config AXP_ALDO1_VOLT default 0 if MACH_SUN6I || MACH_SUN8I_R40 default 1800 if MACH_SUN8I_A83T default 3000 if MACH_SUN8I || MACH_SUN9I - ---help--- + help Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to disable aldo1. On A31 boards aldo1 is often used to power the wifi module. @@ -277,7 +277,7 @@ config AXP_ALDO2_VOLT default 0 if MACH_SUN6I || MACH_SUN9I default 1800 if MACH_SUN8I_A83T default 2500 if MACH_SUN8I - ---help--- + help Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to disable aldo2. On A10(s) / A13 / A20 boards aldo2 is AVCC and should be 3.0V. @@ -293,7 +293,7 @@ config AXP_ALDO3_VOLT depends on AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 if AXP209_POWER || MACH_SUN9I default 3000 if MACH_SUN6I || MACH_SUN8I - ---help--- + help Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to disable aldo3. On A10(s) / A13 / A20 boards aldo3 should be 2.8V. @@ -307,7 +307,7 @@ choice prompt "axp pmic (a)ldo3 voltage rate control" depends on AXP209_POWER default AXP_ALDO3_VOLT_SLOPE_NONE - ---help--- + help The AXP can slowly ramp up voltage to reduce the inrush current when changing voltages. Note, this does not apply when enabling/disabling LDO3. See @@ -316,20 +316,20 @@ choice config AXP_ALDO3_VOLT_SLOPE_NONE bool "No voltage slope" - ---help--- + help Tries to reach the next voltage setting near instantaneously. Measurements indicate that this is about 0.0167 V/uS. config AXP_ALDO3_VOLT_SLOPE_16 bool "1.6 mV per uS" - ---help--- + help Increases the voltage by 1.6 mV per uS until the final voltage has been reached. Note that the scaling is in 25 mV steps and thus the slew rate in reality is about 25 mV/31.250 uS. config AXP_ALDO3_VOLT_SLOPE_08 bool "0.8 mV per uS" - ---help--- + help Increases the voltage by 0.8 mV per uS until the final voltage has been reached. Note that the scaling is in 25 mV steps however and thus the slew rate in reality is about 25 mV/15.625 uS. @@ -340,7 +340,7 @@ endchoice config AXP_ALDO3_INRUSH_QUIRK bool "axp pmic (a)ldo3 inrush quirk" depends on AXP209_POWER - ---help--- + help The reference design denotes a value of 4.7 uF for the output capacitor of LDO3. Some boards have too high capacitance causing an inrush current and resulting an AXP209 shutdown. @@ -349,7 +349,7 @@ config AXP_ALDO4_VOLT int "axp pmic (a)ldo4 voltage" depends on AXP209_POWER default 0 if AXP209_POWER - ---help--- + help Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to disable aldo4. On A10(s) / A13 / A20 boards aldo4 should be 2.8V. @@ -358,7 +358,7 @@ config AXP_DLDO1_VOLT int "axp pmic dldo1 voltage" depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 - ---help--- + help Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used to power the ethernet phy. On A23, A33 and A80 boards this is often @@ -369,7 +369,7 @@ config AXP_DLDO2_VOLT depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 3000 if MACH_SUN9I default 0 - ---help--- + help Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to disable dldo2. On A80 boards dldo2 normally powers the PL pins and should be 3.0V. @@ -378,7 +378,7 @@ config AXP_DLDO3_VOLT int "axp pmic dldo3 voltage" depends on AXP221_POWER || AXP818_POWER default 0 - ---help--- + help Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to disable dldo3. @@ -386,7 +386,7 @@ config AXP_DLDO4_VOLT int "axp pmic dldo4 voltage" depends on AXP221_POWER || AXP818_POWER default 0 - ---help--- + help Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to disable dldo4. @@ -394,7 +394,7 @@ config AXP_ELDO1_VOLT int "axp pmic eldo1 voltage" depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 - ---help--- + help Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to disable eldo1. @@ -402,7 +402,7 @@ config AXP_ELDO2_VOLT int "axp pmic eldo2 voltage" depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 0 - ---help--- + help Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to disable eldo2. @@ -411,7 +411,7 @@ config AXP_ELDO3_VOLT depends on AXP221_POWER || AXP809_POWER || AXP818_POWER default 3000 if MACH_SUN9I default 0 - ---help--- + help Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to disable eldo3. On some A31(s) tablets it might be used to supply 1.2V for the SSD2828 chip (converter of parallel LCD interface @@ -422,7 +422,7 @@ config AXP_FLDO1_VOLT int "axp pmic fldo1 voltage" depends on AXP818_POWER default 0 if MACH_SUN8I_A83T - ---help--- + help Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to disable fldo1. On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is @@ -432,7 +432,7 @@ config AXP_FLDO2_VOLT int "axp pmic fldo2 voltage" depends on AXP818_POWER default 900 if MACH_SUN8I_A83T - ---help--- + help Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to disable fldo2. On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V. @@ -441,21 +441,21 @@ config AXP_FLDO3_VOLT int "axp pmic fldo3 voltage" depends on AXP818_POWER default 0 - ---help--- + help Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to disable fldo3. config AXP_SW_ON bool "axp pmic sw on" depends on AXP809_POWER || AXP818_POWER - ---help--- + help Enable to turn on axp pmic sw. config SY8106A_VOUT1_VOLT int "SY8106A pmic VOUT1 voltage" depends on SY8106A_POWER default 1200 - ---help--- + help Set the voltage (mV) to program the SY8106A pmic VOUT1. This is typically used to power the VDD-CPU and should be 1200mV. Values can range from 680mV till 1950mV. @@ -467,7 +467,7 @@ config TWL4030_POWER depends on OMAP34XX bool "Enable driver for TI TWL4030 power management chip" imply CMD_POWEROFF - ---help--- + help The TWL4030 in a combination audio CODEC/power management with GPIO and it is commonly used with the OMAP3 family of processors diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index 5bc14842e666..0763fba8cb58 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -1,7 +1,7 @@ config DM_PMIC bool "Enable Driver Model for PMIC drivers (UCLASS_PMIC)" depends on DM - ---help--- + help This config enables the driver-model PMIC support. UCLASS_PMIC - designed to provide an I/O interface for PMIC devices. For the multi-function PMIC devices, this can be used as parent I/O @@ -16,7 +16,7 @@ config SPL_DM_PMIC bool "Enable Driver Model for PMIC drivers (UCLASS_PMIC) in SPL" depends on SPL_DM default y - ---help--- + help This config enables the driver-model PMIC support in SPL. UCLASS_PMIC - designed to provide an I/O interface for PMIC devices. For the multi-function PMIC devices, this can be used as parent I/O @@ -28,7 +28,7 @@ config SPL_DM_PMIC config PMIC_CHILDREN bool "Allow child devices for PMICs" default y - ---help--- + help This allows PMICs to support child devices (such as regulators) in SPL. This adds quite a bit of code so if you are not using this feature you can turn it off. Most likely you should turn it on for @@ -38,7 +38,7 @@ config SPL_PMIC_CHILDREN bool "Allow child devices for PMICs in SPL" depends on SPL_DM_PMIC default y - ---help--- + help This allows PMICs to support child devices (such as regulators) in SPL. This adds quite a bit of code so if you are not using this feature you can turn it off. In this case you may need a 'back door' @@ -57,7 +57,7 @@ config PMIC_AB8500 config PMIC_ACT8846 bool "Enable support for the active-semi 8846 PMIC" depends on DM_I2C - ---help--- + help This PMIC includes 4 DC/DC step-down buck regulators and 8 low-dropout regulators (LDOs). It also provides some GPIO, reset and battery functions. It uses an I2C interface and is designed for use with @@ -173,20 +173,20 @@ config SPL_DM_PMIC_PCA9450 config DM_PMIC_PFUZE100 bool "Enable Driver Model for PMIC PFUZE100" - ---help--- + help This config enables implementation of driver-model pmic uclass features for PMIC PFUZE100. The driver implements read/write operations. config SPL_DM_PMIC_PFUZE100 bool "Enable Driver Model for PMIC PFUZE100 in SPL" depends on SPL_DM_PMIC - ---help--- + help This config enables implementation of driver-model pmic uclass features for PMIC PFUZE100 in SPL. The driver implements read/write operations. config DM_PMIC_MAX8907 bool "Enable Driver Model for PMIC MAX8907" - ---help--- + help This config enables implementation of driver-model pmic uclass features for PMIC MAX8907. The driver implements read/write operations. This is a Power Management IC with a decent set of peripherals from which @@ -195,7 +195,7 @@ config DM_PMIC_MAX8907 config DM_PMIC_MAX77663 bool "Enable Driver Model for PMIC MAX77663" - ---help--- + help This config enables implementation of driver-model pmic uclass features for PMIC MAX77663. The driver implements read/write operations. This is a Power Management IC with a decent set of peripherals from which @@ -204,13 +204,13 @@ config DM_PMIC_MAX77663 config DM_PMIC_MAX77686 bool "Enable Driver Model for PMIC MAX77686" - ---help--- + help This config enables implementation of driver-model pmic uclass features for PMIC MAX77686. The driver implements read/write operations. config DM_PMIC_MAX8998 bool "Enable Driver Model for PMIC MAX8998" - ---help--- + help This config enables implementation of driver-model pmic uclass features for PMIC MAX8998. The driver implements read/write operations. @@ -222,7 +222,7 @@ config DM_PMIC_MC34708 config PMIC_MAX8997 bool "Enable Driver Model for PMIC MAX8997" - ---help--- + help This config enables implementation of driver-model pmic uclass features for PMIC MAX8997. The driver implements read/write operations. This is a Power Management IC with RTC, Fuel Gauge, MUIC control on Chip. @@ -236,7 +236,7 @@ config PMIC_MAX8997 config PMIC_QCOM bool "Enable Driver Model for Qualcomm generic PMIC" - ---help--- + help The Qcom PMIC is connected to one (or several) processors with SPMI bus. It has 2 slaves with several peripherals: - 18x LDO @@ -252,7 +252,7 @@ config PMIC_QCOM config PMIC_RK8XX bool "Enable support for Rockchip PMIC RK8XX" select SYSRESET_CMD_POWEROFF if SYSRESET && CMD_POWEROFF - ---help--- + help The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs, an RTC and two low Rds (resistance (drain to source)) switches. It is accessed via an I2C interface. The device is used with Rockchip SoCs. @@ -261,7 +261,7 @@ config PMIC_RK8XX config SPL_PMIC_RK8XX bool "Enable support for Rockchip PMIC RK8XX in SPL" depends on SPL_DM_PMIC - ---help--- + help The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs, an RTC and two low Rds (resistance (drain to source)) switches. It is accessed via an I2C interface. The device is used with Rockchip SoCs. @@ -269,7 +269,7 @@ config SPL_PMIC_RK8XX config PMIC_S2MPS11 bool "Enable Driver Model for PMIC Samsung S2MPS11" - ---help--- + help The Samsung S2MPS11 PMIC provides: - 38 adjustable LDO regulators - 9 High-Efficiency Buck Converters @@ -282,7 +282,7 @@ config PMIC_S2MPS11 config DM_PMIC_SANDBOX bool "Enable Driver Model for emulated Sandbox PMIC" - ---help--- + help Enable the driver for Sandbox PMIC emulation. The emulated PMIC device depends on two drivers: - sandbox PMIC I/O driver - implements dm pmic operations @@ -316,7 +316,7 @@ config DM_PMIC_CPCAP config PMIC_S5M8767 bool "Enable Driver Model for the Samsung S5M8767 PMIC" - ---help--- + help The S5M8767 PMIC provides a large array of LDOs and BUCKs for use as a SoC power controller. It also provides 32KHz clock outputs. This driver provides basic register access and sets up the attached @@ -324,7 +324,7 @@ config PMIC_S5M8767 config PMIC_RN5T567 bool "Enable driver for Ricoh RN5T567 PMIC" - ---help--- + help The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO regulators Real-Time Clock and 4 GPIOs. This driver provides register access only. @@ -332,14 +332,14 @@ config PMIC_RN5T567 config SPL_PMIC_RN5T567 bool "Enable driver for Ricoh RN5T567 PMIC in SPL" depends on SPL_DM_PMIC - ---help--- + help The RN5T567 is a PMIC with 4 step-down DC/DC converters, 5 LDO regulators Real-Time Clock and 4 GPIOs. This driver provides register access only. config PMIC_TPS65090 bool "Enable driver for Texas Instruments TPS65090 PMIC" - ---help--- + help The TPS65090 is a PMIC containing several LDOs, DC to DC convertors, FETs and a battery charger. This driver provides register access only, and you can enable the regulator/charger drivers separately if @@ -347,32 +347,32 @@ config PMIC_TPS65090 config PMIC_PALMAS bool "Enable driver for Texas Instruments PALMAS PMIC" - ---help--- + help The PALMAS is a PMIC containing several LDOs, SMPS. This driver binds the pmic children. config PMIC_LP873X bool "Enable driver for Texas Instruments LP873X PMIC" - ---help--- + help The LP873X is a PMIC containing couple of LDOs and couple of SMPS. This driver binds the pmic children. config PMIC_LP87565 bool "Enable driver for Texas Instruments LP87565 PMIC" - ---help--- + help The LP87565 is a PMIC containing a bunch of SMPS. This driver binds the pmic children. config DM_PMIC_TPS65910 bool "Enable driver for Texas Instruments TPS65910 PMIC" - ---help--- + help The TPS65910 is a PMIC containing 3 buck DC-DC converters, one boost DC-DC converter, 8 LDOs and a RTC. This driver binds the SMPS and LDO pmic children. config DM_PMIC_TPS80031 bool "Enable driver for Texas Instruments TPS80031/TPS80032 PMIC" - ---help--- + help This config enables implementation of driver-model pmic uclass features for TPS80031/TPS80032 PMICs. The driver implements read/write operations. This is a Power Management IC with a decent set of peripherals from which @@ -385,7 +385,7 @@ config PMIC_STPMIC1 bool "Enable support for STMicroelectronics STPMIC1 PMIC" depends on DM_I2C select SYSRESET_CMD_POWEROFF if SYSRESET && CMD_POWEROFF && !ARM_PSCI_FW - ---help--- + help The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches. It is accessed via an I2C interface. The device is used with STM32MP1 SoCs. This driver implements register read/write operations. @@ -445,7 +445,7 @@ endif config PMIC_TPS65217 bool "Enable driver for Texas Instruments TPS65217 PMIC" - ---help--- + help The TPS65217 is a PMIC containing several LDOs, DC to DC convertors, FETs and a battery charger. This driver provides register access only, and you can enable the regulator/charger drivers separately if @@ -485,7 +485,7 @@ config POWER_PFUZE3000 config POWER_MC34VR500 bool "Enable driver for Freescale MC34VR500 PMIC" - ---help--- + help The MC34VR500 is used in conjunction with the FSL T1 and LS1 series SoC. It provides 4 buck DC-DC convertors and 5 LDOs, and it is accessed via an I2C interface. diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig index ca5de5b87269..fad13f669cf3 100644 --- a/drivers/power/regulator/Kconfig +++ b/drivers/power/regulator/Kconfig @@ -1,7 +1,7 @@ config DM_REGULATOR bool "Enable Driver Model for REGULATOR drivers (UCLASS_REGULATOR)" depends on DM - ---help--- + help This config enables the driver model regulator support. UCLASS_REGULATOR - designed to provide a common API for basic regulator's functions, like get/set Voltage or Current value, enable state, etc... @@ -19,7 +19,7 @@ config DM_REGULATOR config SPL_DM_REGULATOR bool "Enable regulators for SPL" depends on DM_REGULATOR && SPL_POWER - ---help--- + help Regulators are seldom needed in SPL. Even if they are accessed, some code space can be saved by accessing the PMIC registers directly. Enable this option if you need regulators in SPL and can cope with @@ -28,7 +28,7 @@ config SPL_DM_REGULATOR config REGULATOR_ACT8846 bool "Enable driver for ACT8846 regulator" depends on DM_REGULATOR && PMIC_ACT8846 - ---help--- + help Enable support for the regulator functions of the ACT8846 PMIC. The driver implements get/set api for the various BUCKS and LDOS supported by the PMIC device. This driver is controlled by a device tree node @@ -127,7 +127,7 @@ config DM_REGULATOR_PFUZE100 bool "Enable Driver Model for REGULATOR PFUZE100" depends on DM_REGULATOR && DM_PMIC_PFUZE100 default DM_PMIC_PFUZE100 - ---help--- + help This config enables implementation of driver-model regulator uclass features for REGULATOR PFUZE100. The driver implements get/set api for: value, enable and mode. @@ -136,7 +136,7 @@ config SPL_DM_REGULATOR_PFUZE100 bool "Enable Driver Model for REGULATOR PFUZE100 in SPL" depends on SPL_DM_REGULATOR && SPL_DM_PMIC_PFUZE100 default SPL_DM_PMIC_PFUZE100 - ---help--- + help This config enables implementation of driver-model regulator uclass features for REGULATOR PFUZE100. The driver implements get/set api for: value, enable and mode. @@ -144,7 +144,7 @@ config SPL_DM_REGULATOR_PFUZE100 config REGULATOR_PWM bool "Enable driver for PWM regulators" depends on DM_REGULATOR && DM_PWM - ---help--- + help Enable support for the PWM regulator functions which voltage are controlled by PWM duty ratio. Some of Rockchip board using this kind of regulator. The driver implements get/set api for the various BUCKS. @@ -154,7 +154,7 @@ config REGULATOR_PWM config DM_REGULATOR_MAX8907 bool "Enable Driver Model for REGULATOR MAX8907" depends on DM_REGULATOR && DM_PMIC_MAX8907 - ---help--- + help This config enables implementation of driver-model regulator uclass features for REGULATOR MAX8907. The driver supports both DC-to-DC Step-Down (SD) Regulators and Low-Dropout Linear (LDO) Regulators @@ -163,7 +163,7 @@ config DM_REGULATOR_MAX8907 config DM_REGULATOR_MAX77663 bool "Enable Driver Model for REGULATOR MAX77663" depends on DM_REGULATOR && DM_PMIC_MAX77663 - ---help--- + help This config enables implementation of driver-model regulator uclass features for REGULATOR MAX77663. The driver supports both DC-to-DC Step-Down (SD) Regulators and Low-Dropout Linear (LDO) Regulators @@ -172,7 +172,7 @@ config DM_REGULATOR_MAX77663 config DM_REGULATOR_MAX77686 bool "Enable Driver Model for REGULATOR MAX77686" depends on DM_REGULATOR && DM_PMIC_MAX77686 - ---help--- + help This config enables implementation of driver-model regulator uclass features for REGULATOR MAX77686. The driver implements get/set api for: value, enable and mode. @@ -221,7 +221,7 @@ config DM_REGULATOR_FIXED bool "Enable Driver Model for REGULATOR Fixed value" depends on DM_REGULATOR select DM_REGULATOR_COMMON - ---help--- + help This config enables implementation of driver-model regulator uclass features for fixed value regulators. The driver implements get/set api for enable and get only for voltage value. @@ -230,7 +230,7 @@ config SPL_DM_REGULATOR_FIXED bool "Enable Driver Model for REGULATOR Fixed value in SPL" depends on DM_REGULATOR_FIXED && SPL select SPL_DM_REGULATOR_COMMON - ---help--- + help This config enables implementation of driver-model regulator uclass features for fixed value regulators in SPL. @@ -238,7 +238,7 @@ config DM_REGULATOR_GPIO bool "Enable Driver Model for GPIO REGULATOR" depends on DM_REGULATOR && DM_GPIO select DM_REGULATOR_COMMON - ---help--- + help This config enables implementation of driver-model regulator uclass features for gpio regulators. The driver implements get/set for voltage value. @@ -247,7 +247,7 @@ config DM_REGULATOR_QCOM_RPMH bool "Enable driver model for Qualcomm RPMh regulator" depends on DM_REGULATOR && QCOM_RPMH select DEVRES - ---help--- + help Enable support for the Qualcomm RPMh regulator. The driver implements get/set api for a limited set of regulators used by u-boot. @@ -255,7 +255,7 @@ config DM_REGULATOR_QCOM_RPMH config DM_REGULATOR_QCOM_USB_VBUS bool "Enable driver model for Qualcomm USB vbus regulator" depends on DM_REGULATOR && DM_PMIC - ---help--- + help Enable support for the Qualcomm USB Vbus regulator. The driver implements get/set api for the regulator to be used by u-boot. @@ -263,14 +263,14 @@ config SPL_DM_REGULATOR_GPIO bool "Enable Driver Model for GPIO REGULATOR in SPL" depends on DM_REGULATOR_GPIO && SPL_DM_GPIO select SPL_DM_REGULATOR_COMMON - ---help--- + help This config enables implementation of driver-model regulator uclass features for gpio regulators in SPL. config REGULATOR_RK8XX bool "Enable driver for RK8XX regulators" depends on DM_REGULATOR && PMIC_RK8XX - ---help--- + help Enable support for the regulator functions of the RK8XX PMIC. The driver implements get/set api for the various BUCKS and LDOs supported by the PMIC device. This driver is controlled by a device tree node @@ -288,7 +288,7 @@ config SPL_REGULATOR_RK8XX config DM_REGULATOR_S2MPS11 bool "Enable driver for S2MPS11 regulator" depends on DM_REGULATOR && PMIC_S2MPS11 - ---help--- + help This enables implementation of driver-model regulator uclass features for REGULATOR S2MPS11. The driver implements get/set api for: value and enable. @@ -296,7 +296,7 @@ config DM_REGULATOR_S2MPS11 config REGULATOR_S5M8767 bool "Enable support for S5M8767 regulator" depends on DM_REGULATOR && PMIC_S5M8767 - ---help--- + help This enables the regulator features of the S5M8767, allowing voltages to be set, etc. The driver is not fully complete but supports most common requirements, including all LDOs and BUCKs. This allows many @@ -305,7 +305,7 @@ config REGULATOR_S5M8767 config DM_REGULATOR_SANDBOX bool "Enable Driver Model for Sandbox PMIC regulator" depends on DM_REGULATOR && DM_PMIC_SANDBOX - ---help--- + help Enable the regulator driver for emulated Sandbox PMIC. The emulated PMIC device depends on two drivers: - sandbox PMIC I/O driver - implements dm pmic operations @@ -335,7 +335,7 @@ config DM_REGULATOR_SANDBOX config REGULATOR_TPS65090 bool "Enable driver for TPS65090 PMIC regulators" depends on PMIC_TPS65090 - ---help--- + help The TPS65090 provides several FETs (Field-effect Transistors, effectively switches) which are supported by this driver as regulators, one for each FET. The standard regulator interface is @@ -345,7 +345,7 @@ config REGULATOR_TPS65090 config DM_REGULATOR_PALMAS bool "Enable driver for PALMAS PMIC regulators" depends on PMIC_PALMAS - ---help--- + help This enables implementation of driver-model regulator uclass features for REGULATOR PALMAS and the family of PALMAS PMICs. The driver implements get/set api for: value and enable. @@ -355,7 +355,7 @@ config DM_REGULATOR_PBIAS depends on DM_REGULATOR select REGMAP select SYSCON - ---help--- + help This enables implementation of driver-model regulator uclass features for pseudo-regulator PBIAS found in the OMAP SOCs. This pseudo-regulator is used to provide a BIAS voltage to MMC1 @@ -366,7 +366,7 @@ config DM_REGULATOR_PBIAS config DM_REGULATOR_LP873X bool "Enable driver for LP873X PMIC regulators" depends on PMIC_LP873X - ---help--- + help This enables implementation of driver-model regulator uclass features for REGULATOR LP873X and the family of LP873X PMICs. The driver implements get/set api for: value and enable. @@ -374,7 +374,7 @@ config DM_REGULATOR_LP873X config DM_REGULATOR_LP87565 bool "Enable driver for LP87565 PMIC regulators" depends on PMIC_LP87565 - ---help--- + help This enables implementation of driver-model regulator uclass features for REGULATOR LP87565 and the family of LP87565 PMICs. LP87565 series of PMICs have 4 single phase BUCKs that can also @@ -393,7 +393,7 @@ config DM_REGULATOR_STM32_VREFBUF config DM_REGULATOR_TPS65910 bool "Enable driver for TPS65910 PMIC regulators" depends on DM_PMIC_TPS65910 - ---help--- + help The TPS65910 PMIC provides 4 SMPSs and 8 LDOs. This driver supports all regulator types of the TPS65910 (BUCK, BOOST and LDO). It implements the get/set api for value and enable. @@ -401,7 +401,7 @@ config DM_REGULATOR_TPS65910 config DM_REGULATOR_TPS65911 bool "Enable driver for TPS65911 PMIC regulators" depends on DM_PMIC_TPS65910 - ---help--- + help This config enables implementation of driver-model regulator uclass features for the TPS65911 PMIC. The driver supports Step-Down DC-DC Converters for Processor Cores (VDD1 and VDD2), Step-Down DC-DC @@ -422,7 +422,7 @@ config DM_REGULATOR_TPS62360 config DM_REGULATOR_TPS80031 bool "Enable driver for TPS80031/TPS80032 PMIC regulators" depends on DM_PMIC_TPS80031 - ---help--- + help This enables implementation of driver-model regulator uclass features for TPS80031/TPS80032 PMICs. The driver implements get/set api for: value and enable. @@ -439,7 +439,7 @@ config DM_REGULATOR_TPS6287X config DM_REGULATOR_STPMIC1 bool "Enable driver for STPMIC1 regulators" depends on DM_REGULATOR && PMIC_STPMIC1 - ---help--- + help Enable support for the regulator functions of the STPMIC1 PMIC. The driver implements get/set api for the various BUCKS and LDOs supported by the PMIC device. This driver is controlled by a device tree node @@ -534,7 +534,7 @@ config REGULATOR_RZG2L_USBPHY config DM_REGULATOR_CPCAP bool "Enable driver for CPCAP PMIC regulators" depends on DM_REGULATOR && DM_PMIC_CPCAP - ---help--- + help Enable implementation of driver-model regulator uclass features for REGULATOR CPCAP. The driver supports both DC-to-DC Step-Down Switching (SW) Regulators and Low-Dropout Linear (LDO) Regulators found in CPCAP diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig index ab4878ebae4e..44305680357a 100644 --- a/drivers/spmi/Kconfig +++ b/drivers/spmi/Kconfig @@ -3,7 +3,7 @@ menu "SPMI support" config SPMI bool "Enable SPMI bus support" depends on DM - ---help--- + help Select this to enable to support SPMI bus. SPMI (System Power Management Interface) bus is used to connect PMIC devices on various SoCs. @@ -11,13 +11,13 @@ config SPMI config SPMI_MSM bool "Support Qualcomm SPMI bus" depends on SPMI - ---help--- + help Support SPMI bus implementation found on Qualcomm Snapdragon SoCs. config SPMI_SANDBOX bool "Support for Sandbox SPMI bus" depends on SPMI - ---help--- + help Demo SPMI bus implementation. Emulates part of PM8916 as single slave (0) on bus. It has 4 GPIO peripherals, pid 0xC0-0xC3. endmenu diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 93c5ee69b253..396a753fa060 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -1,7 +1,7 @@ menuconfig USB bool "USB support" select BLK - ---help--- + help Universal Serial Bus (USB) is a specification for a serial bus subsystem which offers higher speeds and more features than the traditional PC serial port. The bus supplies power to peripherals @@ -94,7 +94,7 @@ comment "USB peripherals" config USB_STORAGE bool "USB Mass Storage support" - ---help--- + help Say Y here if you want to connect USB mass storage devices to your board's USB port. @@ -103,7 +103,7 @@ config USB_KEYBOARD depends on DM_USB select DM_KEYBOARD select SYS_STDIO_DEREGISTER - ---help--- + help Say Y here if you want to use a USB keyboard for U-Boot command line input. @@ -111,7 +111,7 @@ config USB_ONBOARD_HUB bool "Onboard USB hub support" depends on DM_USB select DEVRES - ---help--- + help Say Y here if you want to support discrete onboard USB hubs that don't require an additional control bus for initialization, but need some non-trivial form of initialization, such as enabling a @@ -163,7 +163,7 @@ choice prompt "USB keyboard polling" default SYS_USB_EVENT_POLL_VIA_INT_QUEUE if ARCH_SUNXI default SYS_USB_EVENT_POLL - ---help--- + help Enable a polling mechanism for USB keyboard. config SYS_USB_EVENT_POLL diff --git a/drivers/usb/eth/Kconfig b/drivers/usb/eth/Kconfig index 2f6bfa8e71b8..b9b77f467437 100644 --- a/drivers/usb/eth/Kconfig +++ b/drivers/usb/eth/Kconfig @@ -1,6 +1,6 @@ menuconfig USB_HOST_ETHER bool "USB to Ethernet Controller Drivers" - ---help--- + help Say Y here if you would like to enable support for USB Ethernet adapters. @@ -9,14 +9,14 @@ if USB_HOST_ETHER config USB_ETHER_ASIX bool "ASIX AX8817X (USB 2.0) support" depends on USB_HOST_ETHER - ---help--- + help Say Y here if you would like to support ASIX AX8817X based USB 2.0 Ethernet Devices. config USB_ETHER_ASIX88179 bool "ASIX AX88179 (USB 3.0) support" depends on USB_HOST_ETHER - ---help--- + help Say Y here if you would like to support ASIX AX88179 based USB 3.0 Ethernet Devices. @@ -24,7 +24,7 @@ config USB_ETHER_LAN75XX bool "Microchip LAN75XX support" depends on USB_HOST_ETHER depends on PHYLIB - ---help--- + help Say Y here if you would like to support Microchip LAN75XX Hi-Speed USB 2.0 to 10/100/1000 Gigabit Ethernet controller. Supports 10Base-T/ 100Base-TX/1000Base-T. @@ -34,7 +34,7 @@ config USB_ETHER_LAN78XX bool "Microchip LAN78XX support" depends on USB_HOST_ETHER depends on PHYLIB - ---help--- + help Say Y here if you would like to support Microchip LAN78XX USB 3.1 Gen 1 to 10/100/1000 Gigabit Ethernet controller. Supports 10Base-T/ 100Base-TX/1000Base-T. @@ -43,14 +43,14 @@ config USB_ETHER_LAN78XX config USB_ETHER_MCS7830 bool "MOSCHIP MCS7830 (7730/7830/7832) suppport" depends on USB_HOST_ETHER - ---help--- + help Say Y here if you would like to support MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices. config USB_ETHER_RTL8152 bool "Realtek RTL8152B/RTL8153 support" depends on USB_HOST_ETHER - ---help--- + help Say Y here if you would like to support Realtek RTL8152B/RTL8153 base USB Ethernet Devices. This driver also supports compatible devices from Samsung, Lenovo, TP-LINK and Nvidia. @@ -58,7 +58,7 @@ config USB_ETHER_RTL8152 config USB_ETHER_SMSC95XX bool "SMSC LAN95x support" depends on USB_HOST_ETHER - ---help--- + help Say Y here if you would like to support SMSC LAN95xx based USB 2.0 Ethernet Devices. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index d75883e28650..6bbed9cb513b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -24,7 +24,7 @@ config USB_XHCI_HCD bool "xHCI HCD (USB 3.0) support" depends on DM && OF_CONTROL select USB_HOST - ---help--- + help The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 "SuperSpeed" host controller hardware. @@ -149,7 +149,7 @@ config USB_EHCI_HCD select USB_HOST select EHCI_DESC_BIG_ENDIAN if SYS_BIG_ENDIAN select EHCI_MMIO_BIG_ENDIAN if SYS_BIG_ENDIAN - ---help--- + help The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. If your USB host controller supports USB 2.0, you will likely want to @@ -174,14 +174,14 @@ config USB_EHCI_ATMEL bool "Support for Atmel on-chip EHCI USB controller" depends on ARCH_AT91 default y - ---help--- + help Enables support for the on-chip EHCI controller on Atmel chips. config USB_EHCI_EXYNOS bool "Support for Samsung Exynos EHCI USB controller" depends on ARCH_EXYNOS default y - ---help--- + help Enables support for the on-chip EHCI controller on Samsung Exynos SoCs. @@ -191,7 +191,7 @@ config USB_EHCI_MARVELL default y select USB_EHCI_IS_TDI if !ARM64 select USB_EHCI_IS_TDI if ALLEYCAT_5 - ---help--- + help Enables support for the on-chip EHCI controller on MVEBU SoCs. config USB_EHCI_MX5 @@ -205,7 +205,7 @@ config USB_EHCI_MX6 depends on ARCH_MX6 || ARCH_MX7ULP || ARCH_IMXRT select EHCI_HCD_INIT_AFTER_RESET default y - ---help--- + help Enables support for the on-chip EHCI controller on i.MX6 SoCs. config USB_EHCI_MX7 @@ -215,7 +215,7 @@ config USB_EHCI_MX7 select PHY if IMX8M || IMX9 select NOP_PHY if IMX8M || IMX9 default y - ---help--- + help Enables support for the on-chip EHCI controller on i.MX7/i.MX8M/i.MX9 SoCs. config USB_EHCI_MXS @@ -230,7 +230,7 @@ config USB_EHCI_MXS config USB_EHCI_NPCM bool "Support for Nuvoton NPCM on-chip EHCI USB controller" depends on ARCH_NPCM - ---help--- + help Enables support for the on-chip EHCI controller on Nuvoton NPCM chips. @@ -240,7 +240,7 @@ config USB_EHCI_OMAP select PHY imply NOP_PHY default y - ---help--- + help Enables support for the on-chip EHCI controller on OMAP3 and later SoCs. @@ -255,7 +255,7 @@ if USB_EHCI_MX6 || USB_EHCI_MX7 config MXC_USB_OTG_HACTIVE bool "USB Power pin high active" - ---help--- + help Set the USB Power pin polarity to be high active (PWR_POL) endif @@ -265,7 +265,7 @@ config USB_EHCI_MSM depends on DM_USB select USB_ULPI select MSM8916_USB_PHY - ---help--- + help Enables support for the on-chip EHCI controller on Qualcomm Snapdragon SoCs. @@ -280,7 +280,7 @@ config USB_EHCI_TEGRA bool "Support for NVIDIA Tegra on-chip EHCI USB controller" depends on ARCH_TEGRA select USB_EHCI_IS_TDI - ---help--- + help Enable support for Tegra on-chip EHCI USB controller. If you enable ULPI and your PHY needs a different reference clock than the standard 24 MHz then you have to define CFG_ULPI_REF_CLK to the appropriate @@ -291,14 +291,14 @@ config USB_EHCI_ZYNQ depends on ARCH_ZYNQ default y select USB_EHCI_IS_TDI - ---help--- + help Enable support for Zynq on-chip EHCI USB controller config USB_EHCI_GENERIC bool "Support for generic EHCI USB controller" depends on DM_USB default ARCH_SUNXI - ---help--- + help Enables support for generic EHCI controller. config EHCI_HCD_INIT_AFTER_RESET @@ -310,7 +310,7 @@ config USB_EHCI_FSL select EHCI_HCD_INIT_AFTER_RESET select SYS_FSL_USB_INTERNAL_UTMI_PHY if MPC85xx && \ !(ARCH_B4860 || ARCH_B4420 || ARCH_P4080 || ARCH_P1020 || ARCH_P2020) - ---help--- + help Enables support for the on-chip EHCI controller on FSL chips. config SYS_FSL_USB_INTERNAL_UTMI_PHY @@ -340,7 +340,7 @@ config USB_OHCI_HCD depends on DM && OF_CONTROL select USB_HOST select USB_OHCI_NEW - ---help--- + help The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's UHCI specification. If your USB host controller follows the OHCI spec, @@ -361,7 +361,7 @@ config USB_OHCI_PCI config USB_OHCI_GENERIC bool "Support for generic OHCI USB controller" default ARCH_SUNXI - ---help--- + help Enables support for generic OHCI controller. config USB_OHCI_DA8XX @@ -374,7 +374,7 @@ config USB_OHCI_DA8XX config USB_OHCI_NPCM bool "Support for Nuvoton NPCM on-chip OHCI USB controller" depends on ARCH_NPCM - ---help--- + help Enables support for the on-chip OHCI controller on Nuvoton NPCM chips. @@ -391,7 +391,7 @@ config SYS_OHCI_SWAP_REG_ACCESS config USB_UHCI_HCD bool "UHCI HCD (most Intel and VIA) support" select USB_HOST - ---help--- + help The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB host controller). If your USB host controller conforms to this @@ -410,7 +410,7 @@ config USB_DWC2 bool "DesignWare USB2 Core support" depends on DM && OF_CONTROL select USB_HOST - ---help--- + help The DesignWare USB 2.0 controller is compliant with the USB-Implementers Forum (USB-IF) USB 2.0 specifications. Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) @@ -421,7 +421,7 @@ if USB_DWC2 config USB_DWC2_BUFFER_SIZE int "Data buffer size in kB" default 64 - ---help--- + help By default 64 kB buffer is used but if amount of RAM avaialble on the target is not enough to accommodate allocation of buffer of that size it is possible to shrink it. Smaller sizes should be fine @@ -433,7 +433,7 @@ config USB_R8A66597_HCD bool "Renesas R8A66597 USB Core support" depends on DM && OF_CONTROL select USB_HOST - ---help--- + help This enables support for the on-chip Renesas R8A66597 USB 2.0 controller, present in various RZ and SH SoCs. diff --git a/drivers/usb/musb-new/Kconfig b/drivers/usb/musb-new/Kconfig index f8daaddc657e..ae9c7f3a6efe 100644 --- a/drivers/usb/musb-new/Kconfig +++ b/drivers/usb/musb-new/Kconfig @@ -81,7 +81,7 @@ config USB_MUSB_SUNXI depends on PHY_SUN4I_USB select USB_MUSB_PIO_ONLY default y - ---help--- + help Say y here to enable support for the sunxi OTG / DRC USB controller used on almost all sunxi boards. diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c2acc13139c0..f07e52cb39e1 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -508,7 +508,7 @@ config FRAMEBUFFER_VESA_MODE config VIDEO_LCD_ANX9804 bool "ANX9804 bridge chip" - ---help--- + help Support for the ANX9804 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fy into a DP interface for driving eDP TFT displays. It uses I2C for configuration. @@ -654,7 +654,7 @@ config VIDEO_LCD_SHARP_LQ101R1SX01 config VIDEO_LCD_SSD2828 bool "SSD2828 bridge chip" - ---help--- + help Support for the SSD2828 bridge chip, which can take pixel data coming from a parallel LCD interface and translate it on the fly into MIPI DSI interface for driving a MIPI compatible LCD panel. It uses SPI for @@ -664,7 +664,7 @@ config VIDEO_LCD_SSD2828_TX_CLK int "SSD2828 TX_CLK frequency (in MHz)" depends on VIDEO_LCD_SSD2828 default 0 - ---help--- + help The frequency of the crystal, which is clocking SSD2828. It may be anything in the 8MHz-30MHz range and the exact value should be retrieved from the board schematics. Or in the case of Allwinner @@ -676,7 +676,7 @@ config VIDEO_LCD_SSD2828_RESET string "RESET pin of SSD2828" depends on VIDEO_LCD_SSD2828 default "" - ---help--- + help The reset pin of SSD2828 chip. This takes a string in the format understood by 'sunxi_name_to_gpio' function, e.g. PH1 for pin 1 of port H. @@ -697,7 +697,7 @@ config VIDEO_LCD_HITACHI_TX10D07VM0BAA config VIDEO_LCD_HITACHI_TX18D42VM bool "Hitachi tx18d42vm LVDS LCD panel support" - ---help--- + help Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a lcd controller which needs to be initialized over SPI, once that is done they work like a regular LVDS panel. @@ -723,7 +723,7 @@ config VIDEO_LCD_SPI_CS string "SPI CS pin for LCD related config job" depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM default "" - ---help--- + help This is one of the SPI communication pins, involved in setting up a working LCD configuration. The exact role of SPI may differ for different hardware setups. The option takes a string in the format @@ -733,7 +733,7 @@ config VIDEO_LCD_SPI_SCLK string "SPI SCLK pin for LCD related config job" depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM default "" - ---help--- + help This is one of the SPI communication pins, involved in setting up a working LCD configuration. The exact role of SPI may differ for different hardware setups. The option takes a string in the format @@ -743,7 +743,7 @@ config VIDEO_LCD_SPI_MOSI string "SPI MOSI pin for LCD related config job" depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM default "" - ---help--- + help This is one of the SPI communication pins, involved in setting up a working LCD configuration. The exact role of SPI may differ for different hardware setups. The option takes a string in the format @@ -753,7 +753,7 @@ config VIDEO_LCD_SPI_MISO string "SPI MISO pin for LCD related config job (optional)" depends on VIDEO_LCD_SSD2828 default "" - ---help--- + help This is one of the SPI communication pins, involved in setting up a working LCD configuration. The exact role of SPI may differ for different hardware setups. If wired up, this pin may provide additional @@ -768,7 +768,7 @@ config VIDEO_MVEBU bool "Armada XP LCD controller" depends on ARCH_MVEBU imply VIDEO_DAMAGE - ---help--- + help Support for the LCD controller integrated in the Marvell Armada XP SoC. -- 2.39.5