Return-path: Received: from cock.li ([2a06:1700:0:b::c0cc]) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1ddriU-0006Cv-OI for ath10k@lists.infradead.org; Sat, 05 Aug 2017 05:33:40 +0000 MIME-Version: 1.0 Date: Sat, 05 Aug 2017 05:33:14 +0000 From: red2scratch@firemail.cc Subject: ath10k support to monitor mode Message-ID: <89bb20844fad4d5069f689d5a1f25a79@firemail.cc> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Thank you in advance for the work that you do. Request your assistance for a clearer understanding on the capabilities of the ath10k. * Does the ath10k currently support monitor mode? * If not, is it s firmware limitation that cannot be enabled until the firmware includes it or is it a driver limitation in which monitor mode just has not been prioritized to be worked into the driver yet? * Is it a hardware limitation based on my specific card, the QCA6174? Reviewing the linux-wireless website, it is noted that the ath10k supports monitor mode: https://wireless.wiki.kernel.org/en/users/drivers/ath10k/monitor Meaning at least it has been supported in the past. However my current configuration: ~~~~~~~~~~~~ Network: Card-1: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter driver: ath10k_pci ath10k_pci 0000:06:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1a56:1535 ath10k_pci 0000:06:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0 ath10k_pci 0000:06:00.0: firmware ver WLAN.RM.4.4-00022-QCARMSWPZ-2 api 5 features wowlan,ignore-otp crc32 4d458559 ath10k_pci 0000:06:00.0: firmware: direct-loading firmware ath10k/QCA6174/hw3.0/board-2.bin ath10k_pci 0000:06:00.0: board_file api 2 bmi_id N/A crc32 07ee144e ath10k_pci 0000:06:00.0: htt-ver 3.32 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 ~~~~~~~~~~~~~~ does not seem to support monitor mode as I get no data when attempting to place it in monitor mode. I have seen similar requests/problems with others having the same card on other websites wanting to place into monitor mode as well. Appreciate any assistance to help me understand the problem. Thank you in advance. V/R Rett _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k