From: Soeren Moch Date: Tue, 28 Jan 2020 18:16:29 +0100 Subject: [PATCH v2][ 1/3] tbs2910: disable fuse command In-Reply-To: <7efe72d0-27e3-99d1-00c6-82dafdc3b345@videantis.de> References: <20200128170418.15912-1-GNUtoo@cyberdimension.org> <7efe72d0-27e3-99d1-00c6-82dafdc3b345@videantis.de> Message-ID: <8a9747dc-1cb1-a66d-806e-040f74ae5d34@web.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Sorry, sent with wrong sender address. Please only use this address here. Soeren On 28.01.20 18:13, Soeren Moch wrote: > On 28.01.20 18:07, Fabio Estevam wrote: >> On Tue, Jan 28, 2020 at 2:04 PM Denis 'GNUtoo' Carikli >> wrote: >>> The fuse command is not needed for booting or during usual >>> users interactions with u-boot. >>> >>> As that the resulting u-boot.imx image is already very >>> close to the size limit, removing the fuse command shouldn't >>> hurt. >>> >>> With arm-linux-gnueabi-gcc 9.2.0-1 from the Parabola >>> GNU/Linux distribution, it shrinks the image from 392192 to >>> 388096 bytes. >> I think it would be more readable if you put the delta value instead >> of initial versus final. > Which is 4k, surprise, surprise, the alignment of imx files. Actually > you only shrink the binary by a few bytes, which is not worth the pain > it you need fuses. > > Tom today merged a patch with much bigger size reduction (mentioned > earlier), so this should not be required. > > Soeren