From: Seyyed Mohammad Sajjadi Date: Mon, 4 May 2009 10:30:28 -0700 (PDT) Subject: [U-Boot] Xilinx SPI driver Message-ID: <905854.4395.qm@web54006.mail.re2.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi After searching internet for a good example of using U-boot PPC405 in xilinx FPGAs with only a SPI Flash, and finding nothing, I began writing my own driver. I used a couple of standalone examples besides the linux driver as the base point, and could finally use it. As much as I have tested the system, it is working fine with a m25p64 spi flash. Now I would be happy to share the driver, but haven't done such a thing previously. I am not even much familiar with patch! Is there any document telling the procedure? Besides I have developed board support for suaku V sz410 board, and a simplistic driver for xilinx frame buffer core too (which is not as much tested as the spi driver). Should I submit them too? Regards S. M. Sajjadi