From: raj reddy Date: Tue, 11 Sep 2007 14:54:14 +0100 (BST) Subject: [U-Boot-Users] Atmel AT49BV320C support in Uboot In-Reply-To: <20070911133314.92B0824669@gemini.denx.de> Message-ID: <926455.96023.qm@web7701.mail.in.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I tried to use the CFI driver by adding the CFI macros in the .h file. But the size of my flash is 2MB, but it shows 4MB. I have one doubt, in the board .h file we specify the sectore size. what size i must give the sector size in board .h file. where we specify different sizes of sector in the flash driver file.. (i.e 8 * 4K, 63 * 32 K.) Regards. --- Wolfgang Denk wrote: > First: Please post U-Boot related questions to > the mailing list > *only* - unless you as ENX for commercial > support which we will > happily provide, but that's not for free. > > In message > <183967.9154.qm@web7711.mail.in.yahoo.com> you > wrote: > > CFI supports only the same size sector flash, but > > This is not correct. The CFI driver also supports > boot sector type > flash chips. > > > is't the right procedure what i am trying to add > the > > flash support for AT49BV320C > > If the flashis CFI conforming,then you should use > the CFI driver. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang > Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 > Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 > Email: wd at denx.de > Computers are not intelligent. They only think they > are. > 5, 50, 500, 5000 - Store N number of mails in your inbox. Go to http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html