From: agnel juni Date: Wed, 14 Feb 2007 03:56:06 +0530 (IST) Subject: [U-Boot-Users] BDI config file - MPC8360e issue Message-ID: <946128.36243.qm@web8408.mail.in.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi: I am working with a MPC8360EA MDS processor board with Rev2.0 silicon and DDR2 memory in it. I need to program the flash with u-boot using BDI2000. I downloaded the BDI config gile from the following FTP site as susggested in the mailing list. ftp://83.125.32.26/bdigdb/config/powerpc/mpc83xx/ I verified the DDR2 parameters from u-boot and it matches the configuration section of the BDI config file too. The board has 32MB Spansion flash in it (S29GL256N). But when I connect the BDI to the board , BDI keeps resettingthe board with the following error. /****************************************************************/ TARGET: Target PVR is 0x80830030 - TARGET: resetting target passed - TARGET: processing target startup .... - COP status is 0x01 - Target PVR is 0x80830030 - BDI tries to resynch TAP - COP status is 0x21 - Target PVR is 0x00000000 *** TARGET: processing target startup failed # PPC: timeout while waiting for freeze - TARGET: target will be restarted in 10 sec /**************************************************************/ Any suggestions to solve this issue would be appreciated. Thanks Junita __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20070214/39bd8d95/attachment.htm