From: Marek Vasut Date: Sun, 21 Jun 2020 15:59:13 +0200 Subject: [PATCH V2 3/5] clk: renesas: Add R8A774A1 clock tables In-Reply-To: References: <20200619135830.501470-1-aford173@gmail.com> <20200619135830.501470-4-aford173@gmail.com> Message-ID: <95cb1876-a8f0-db70-96a9-37db76db0bbe@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 6/21/20 3:37 PM, Adam Ford wrote: [...] > static const struct mstp_stop_table r8a774a1_mstp_table[] = { > { 0x00000000, 0, 0x00000000, 0 }, > { 0xc3e81000, 0, 0xc3e81000, 0 }, > { 0x000E0FDC, 0, 0x000E0FDC, 0 }, > { 0xD00C7C1F, 0, 0xD00C7C1F, 0 }, > { 0x80000004, 0, 0x80000004, 0 }, > { 0x00DF0006, 0, 0x00DF0006, 0 }, > { 0XC5EACCCE, 0, 0XC5EACCCE, 0 }, > { 0x29E1401C, 0, 0x29E1401C, 0 }, > { 0x00009FF1, 0, 0x00009FF1, 0 }, > { 0xFC4FDFE0, 0, 0xFC4FDFE0, 0 }, > { 0xFFFEFFE8, 0, 0xFFFEFFE8, 0 }, > }; > > I read through registers 1-10, but there doesn't appear to be a > register 0, so I left it as all 0's. > The rest of these I only set the bits based on flags that were > available for the RZ/G2M regardless of their default clock status. > > Does this look right to you? If you think it looks good, I'll submit > another revision. If it matches the datasheet, then it's fine, thanks.