From: Bradley Remedios Date: Fri, 18 Feb 2005 11:18:57 -0800 Subject: [U-Boot-Users] IBM/AMCC 440EP ethernet question In-Reply-To: <14370726.1108733484215.JavaMail.root@beaker.psp.pas.earthlink.net> References: <14370726.1108733484215.JavaMail.root@beaker.psp.pas.earthlink.net> Message-ID: <963b338705021811181474b7c9@mail.gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Fri, 18 Feb 2005 05:31:23 -0800 (GMT-08:00), Miles Gazic wrote: > Do you happen to know what PHY you are using? Our Broadcom AC101L can do > both RMII and MII, the hardware guy thinks all he might have to do is pop in a > 50MHz crystal instead of the 25MHz one we have now. I think it might be worthwhile > for me to try that, at least I'll be travelling down the road more well travelled. We are using a Micrel KS8721B. In terms of Ethernet I have recently broken it. We are booting our board from NAND. When a Debugger loads U-Boot into SDRAM everything works great. When our NAND Bootloader loads U-Boot into SDRAM both Ethernet and I2C have become broken. (Auto-Negotiation works but Transmit is broken, possibly Recieve Also.) -- Bradley Remedios bremedios at gmail.com