From: Keerthy Date: Tue, 5 Nov 2019 11:03:07 +0530 Subject: [U-Boot] [PATCH v3 00/18] misc: Add AVS class 0 support for AM6 In-Reply-To: References: <20191024093103.13220-1-j-keerthy@ti.com> Message-ID: <97bb564d-70be-c10a-e363-d84c65e09d18@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 24/10/19 3:45 PM, Lokesh Vutla wrote: > > > On 24/10/19 3:00 PM, Keerthy wrote: >> Adaptive Voltage Scaling is a technology used in TI SoCs to optimize >> the operating voltage based on characterization data written to efuse >> during production. >> >> Add support for Adaptive Voltage scaling class 0 support >> for AM6 family of devices. Adaptive voltage scaling class 0 >> implies that optimized voltage values for a particular OPP >> of a particular voltage domain are read from Efuse and programmed >> on the pmic/regulator. >> >> Tested on AM654-EVM for MPU @800 MHz. >> Tested on J721e-evm for MPU. > > For the entire series: > > Reviewed-by: Lokesh Vutla > > Thanks and regards, > Lokesh Tom, If no further comments can this series be pulled in? - Keerthy > >> >> The series is based on top of the branch: >> >> https://github.com/lokeshvutla/u-boot/tree/devel/j721e-full-boot >> >> Changes in v3: >> >> * Extended the support for j721e-evm. >> * Moved vtm node under r5-board dts. >> >> Changes in v2: >> >> * Avoided creation of new uclass. AVS driver is now under misc. >> >> Keerthy (11): >> clk: clk-ti-sci: Notify AVS driver upon setting clock rate >> misc: k3_avs: Add j721e support >> power: pmic: tps65941: Add support for tps65941 family of PMICs >> power: regulator: tps65941: add regulator support >> arm: mach-k3: am6_init: Initialize AVS class 0 >> arm: mach-k3: j721e_init: Initialize avs class 0 >> arm: dts: k3-am654-r5-base-board: Add VTM node >> arm: dts: k3-j721e-r5-common-proc-board: Add VTM node >> arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent >> wkup_i2c0 node >> arm: dts: k3-j721e-r5-common-proc-board: Hook buck12_reg to vtm supply >> configs: j721e_evm_r5_defconfig: Enable AVS Class 0 & dependent >> configs >> >> Tero Kristo (7): >> misc: k3_avs: add driver for K3 Adaptive Voltage Scaling Class 0 >> power: regulator: tps6236x: add support for tps6236x regulators >> arm: dts: k3-am654-r5-base-board: enable wkup_i2c0 driver for spl >> arm: dts: k3-am654-r5-base-board: add supply rail for MPU >> arm: dts: k3-am654-r5-base-board: enable wkup_vtm0 node and link in >> supplies >> configs: am65x_evm_r5_defconfig: Enable TPS62363 regulator support >> configs: am65x_evm_r5_defconfig: Enable AVS class 0 support >> >> arch/arm/dts/k3-am654-r5-base-board.dts | 27 ++ >> arch/arm/dts/k3-j721e-mcu-wakeup.dtsi | 11 + >> .../arm/dts/k3-j721e-r5-common-proc-board.dts | 44 ++ >> arch/arm/mach-k3/am6_init.c | 7 + >> arch/arm/mach-k3/j721e_init.c | 7 + >> configs/am65x_evm_r5_defconfig | 2 + >> configs/j721e_evm_r5_defconfig | 9 + >> drivers/clk/clk-ti-sci.c | 5 + >> drivers/misc/Kconfig | 9 + >> drivers/misc/Makefile | 1 + >> drivers/misc/k3_avs.c | 388 +++++++++++++++++ >> drivers/power/pmic/Kconfig | 7 + >> drivers/power/pmic/Makefile | 1 + >> drivers/power/pmic/tps65941.c | 83 ++++ >> drivers/power/regulator/Kconfig | 20 + >> drivers/power/regulator/Makefile | 2 + >> drivers/power/regulator/tps62360_regulator.c | 123 ++++++ >> drivers/power/regulator/tps65941_regulator.c | 407 ++++++++++++++++++ >> include/k3-avs.h | 30 ++ >> include/power/tps65941.h | 26 ++ >> 20 files changed, 1209 insertions(+) >> create mode 100644 drivers/misc/k3_avs.c >> create mode 100644 drivers/power/pmic/tps65941.c >> create mode 100644 drivers/power/regulator/tps62360_regulator.c >> create mode 100644 drivers/power/regulator/tps65941_regulator.c >> create mode 100644 include/k3-avs.h >> create mode 100644 include/power/tps65941.h >>