From: bugtrack@alsa-project.org Subject: [ALSA - driver 0001248]: Sampling rate not correct - reports 44100 but works at 48000 Date: Sun, 10 Jul 2005 11:07:10 +0200 Message-ID: <9b80ba892bca7b0c12a17bbfbe75ade7@bugtrack.alsa-project.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.jcu.cz (ALSA's E-mail Delivery System) with ESMTP id 50FDB15C for ; Sun, 10 Jul 2005 11:07:10 +0200 (MEST) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A NOTE has been added to this issue. ====================================================================== ====================================================================== Reported By: steve Assigned To: karsten ====================================================================== Project: ALSA - driver Issue ID: 1248 Category: USB - usb-usx2y Reproducibility: random Severity: major Priority: normal Status: assigned Distribution: Debian Kernel Version: 2.6.12 ====================================================================== Date Submitted: 07-10-2005 05:25 CEST Last Modified: 07-10-2005 11:07 CEST ====================================================================== Summary: Sampling rate not correct - reports 44100 but works at 48000 Description: Often, when recording with jackd and ardour, after specifying a sampling rate of 44100 and receiving no complaint from jackd I find the US-122 has actually been working at 48000. Also, trying to play a 44100 WAV file via beep-media-player I find the output pitch-shifted and suspect that again the US-122 is working at 48000. Resampling the file in software to 48000 causes it to play at the correct pitch. I have checked the outpout from dmesg and can see no error messages about being unable to set the sample rate so I'm puzzled. ====================================================================== ---------------------------------------------------------------------- martin - 07-10-05 11:07 ---------------------------------------------------------------------- The hardware can only work at 44100 or at 48000 Hz. If you're trying 44.1 kHz for playback and 48000Hz for recording it will fail. This is a typical limitation for FPGA based cards. RME cards have the same limitation. Use one sample frequency for both directions. Issue History Date Modified Username Field Change ====================================================================== 07-10-05 05:25 steve New Issue 07-10-05 05:25 steve Distribution => Debian 07-10-05 05:25 steve Kernel Version => 2.6.12 07-10-05 11:07 martin Note Added: 0005442 ====================================================================== ------------------------------------------------------- This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar