From: Peter Ujfalusi Date: Mon, 15 Jun 2020 15:15:45 +0300 Subject: [PATCH 0/2] omap4: sdp: convert to device model In-Reply-To: <20200615101605.19922-1-peter.ujfalusi@ti.com> References: <20200615101605.19922-1-peter.ujfalusi@ti.com> Message-ID: <9ef92fbf-0304-d142-e7fd-0a59463d1cad@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 15/06/2020 13.16, Peter Ujfalusi wrote: > Hi, > > The series is based on Tero's omap4 panda and omap5 uevm device model conversion > patches. > > To avoid removal of the SDP4430 due to neglect. > With these patches applied no more complaints about DM_SPL conversion and the > board boots up Linux. > We never had ethernet support for spd4430 in mainline (ks8851 on spi bus), this > is still the case. > > Linux boots up, but for some reason ethernet is not responsible, that needs to > be investigated, unlikely caused by u-boot. Actually it works in Linux. > I really like to keep sdp4430/Blaze support as it is the platform where I can > test DMIC and other audio features of McPDM/twl6040. The board also have dual > LCD, which is a nice thing to have. > > Regards, > Peter > --- > Peter Ujfalusi (2): > omap4: Copy device tree from Linux 5.7.y for SDP4430 > omap4: sdp: convert to device model > > arch/arm/dts/Makefile | 4 + > arch/arm/dts/omap4-sdp-es23plus.dts | 14 + > arch/arm/dts/omap4-sdp.dts | 713 ++++++++++++++++++++++++++++ > board/ti/sdp4430/sdp.c | 12 + > configs/omap4_sdp4430_defconfig | 8 + > 5 files changed, 751 insertions(+) > create mode 100644 arch/arm/dts/omap4-sdp-es23plus.dts > create mode 100644 arch/arm/dts/omap4-sdp.dts > - P?ter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki