Date: Thu, 06 Apr 2000 15:27:11 +0100 Subject: Re: Setting up yaboot From: Mark Steer To: Ethan Benson CC: Olaf Hering , Message-ID: In-Reply-To: <20000406054042.E2099@plato.localdomain.local> Mime-version: 1.0 Content-type: text/plain; charset="US-ASCII" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: on 6/4/2000 2:40 pm, Ethan Benson at erbenson@alaska.net wrote: > On Thu, Apr 06, 2000 at 02:23:38PM +0100, Mark Steer wrote: > >> I've recently setup my new Pismo/400 with Linux and, as of this morning, >> Darwin 1.0 and I think I'm going to require a hard drive upgrade about 6 >> months sooner than I'd planned for... > > ;-) > >> I can confirm that you do need to add the PowerBook3,1 line into the >> section before the Pismo will use the os chooser script >> correctly. > > thought so... > >> One thing I noticed, at least with this machine, is that the line:- >> >> boot hd:10,\\yaboot >> >> will fail unless I rewrite it as:- >> >> boot hd:10,yaboot > > that line means boot yaboot from the root directory, certianly the > most reliable method i have found other then hd:,\\:tbxi (which only > works on CHRP scripts with a properly blessed directory) > > the first notation means to load the file from the blessed directory, > which if there isn't one will fail. macos tends to remove the > blessing from non-macos directories. > Ah! thank you, that clears it up. I haven't bothered to set a system folder on my HFS exchange disk. [Thanks also to BenH for that information.] >> This is the first new world machine that I have setup with Linux so I don't >> know if this is right for others or if my configuration may be different. >> I'm going to be upgrading :-) an iMac DV with Linux this afternoon so I'll >> report back what that one does with regard to the os chooser script. >> >> Now I'm off to try and rewrite the script so that I can choose Darwin as >> well... > > does darwin still use UFS or ffs for its default filesystem? The Darwin binary that I downloaded installs onto an HFS+ volume from an image (darwin.img) using the Apple Software Restore utility. In my case the supplied version of the Software Restore utility failed each time it was started(error: can't locate HID, I think) and I had to use the one that came with my system restore CD. > if so it probably uses a bootstrap partition of type Apple_Bootstrap or > Apple_BootROM setup pretty much the same way i advocate (that is where > i got the idea, from OSX server) if it does still use this partition > you should be able to add a reference to it like so: > > hd:6,\\:tbxi > > to your chooser script. where 6 is the real partition number of the > darwin bootstrap partition. Yes, that's it. The System Disk utility (version 3 is supplied) showed me the info that it writes into OF, giving me enough info to modify the script. In my case hd:13,\\:tbxi I think that's just too many partitions :-) Regards, Mark Steer. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/