Received: from jazzswing.ncsc.mil (jazzswing.ncsc.mil [144.51.68.65]) by tycho.ncsc.mil (8.12.8/8.12.8) with ESMTP id h7KE9EHa021668 for ; Wed, 20 Aug 2003 10:09:14 -0400 (EDT) Received: from jazzswing.ncsc.mil (localhost [127.0.0.1]) by jazzswing.ncsc.mil with ESMTP id h7KE7ouC003423 for ; Wed, 20 Aug 2003 14:07:50 GMT Received: from hotmail.com (bay8-dav65.bay8.hotmail.com [64.4.26.200]) by jazzswing.ncsc.mil with ESMTP id h7KE7n4e003420 for ; Wed, 20 Aug 2003 14:07:49 GMT From: "Ripin Natani" To: "selinux" Subject: Re: "Unable to mount root fs on unknown-block(0,0)" Date: Wed, 20 Aug 2003 10:09:06 -0400 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_007B_01C36703.16DCFC90" Message-ID: Sender: owner-selinux@tycho.nsa.gov List-Id: selinux@tycho.nsa.gov This is a multi-part message in MIME format. ------=_NextPart_000_007B_01C36703.16DCFC90 Content-Type: multipart/alternative; boundary="----=_NextPart_001_007C_01C36703.16DCFC90" ------=_NextPart_001_007C_01C36703.16DCFC90 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable (I have sent this message twice before but it did not appear on the list = .. seems that there is some prob) Yes I am booting with an initrd. Basically I do a 'make install' after = make 'make modules_install'. The steps that I perform: make mrproper make menuconfig make clean make bzImage make modules make modules_install make install I also updated the mkinitrd (now i have the 3.4.42 version). Does that = have the patch ? Btw I did not find any documentation in linux2.6/README = about the patch for the mkinitrd script. ( I hope i looked at the right README !!! ). The system is still giving the same error ! Also I am resending the .config file. Thanks, -Ripin ----- Original Message ----- From: "Stephen Smalley" To: "Ripin Natani" Sent: Tuesday, August 19, 2003 9:01 AM Subject: Re: "Unable to mount root fs on unknown-block(0,0)" > On Mon, 2003-08-18 at 18:12, Ripin Natani wrote: > > Hi, > > I am trying to run a custom compiled SElinux kernel with as = small as > > possible (with support for nfs and mounting and basic networking > > capabilities). I get the following error when i use the custom = compiled > > image > > "Unable to mount root fs on unknown-block(0,0)" > > Are you boot it with an initrd? Did you patch your mkinitrd script = per > the README so that the initial policy load will occur from the initrd? > > The root=3DLABEL=3D/ should work fine as long as you are using an = initrd > (which you should be using, to perform the initial policy load, unless > using the old 2.4-based SELinux). If you weren't using an initrd, you > would need to specify the actual root device, e.g. root=3D/dev/hda2 or > whatever is appropriate for your system. > > -- > Stephen Smalley > National Security Agency > > ------=_NextPart_001_007C_01C36703.16DCFC90 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
(I have sent=20 this message twice before but it did not appear on the list ..
seems = that=20 there is some prob)

Yes I am booting with an initrd. Basically I = do a=20 'make install' after make
'make modules_install'. The steps that I=20 perform:
make mrproper
make menuconfig
make clean
make=20 bzImage
make modules
make modules_install
make install
I = also=20 updated the mkinitrd (now i have the 3.4.42 version). Does that = have
the=20 patch ? Btw I did not find any documentation in linux2.6/README = about
the=20 patch for the mkinitrd script. ( I hope i looked at the right = README
!!!=20 ).
The system is still giving the same error !
Also I am resending = the=20 .config file.
Thanks,
-Ripin





----- Original = Message=20 -----
From: "Stephen Smalley" <
sds@epoch.ncsc.mil>
To: "Ripin Natani" <
ripinfs@hotmail.com>
Sent: Tuesday, August 19, 2003 9:01 AM
Subject: Re: = "Unable to=20 mount root fs on unknown-block(0,0)"


> On Mon, 2003-08-18 = at=20 18:12, Ripin Natani wrote:
> > Hi,
>=20 >       I am trying to run a custom = compiled=20 SElinux kernel with as small
as
> > possible (with support = for nfs=20 and mounting and basic networking
> > capabilities). I get the=20 following error when i use the custom compiled
> > = image
> >=20 "Unable to mount root fs on unknown-block(0,0)"
>
> Are you = boot it=20 with an initrd?  Did you patch your mkinitrd script per
> the = README=20 so that the initial policy load will occur from the = initrd?
>
> The=20 root=3DLABEL=3D/ should work fine as long as you are using an = initrd
> (which=20 you should be using, to perform the initial policy load, unless
> = using=20 the old 2.4-based SELinux).  If you weren't using an initrd, = you
>=20 would need to specify the actual root device, e.g. root=3D/dev/hda2 = or
>=20 whatever is appropriate for your system.
>
> --
> = Stephen=20 Smalley <
sds@epoch.ncsc.mil
>
> National Security=20 Agency
>
>
------=_NextPart_001_007C_01C36703.16DCFC90-- ------=_NextPart_000_007B_01C36703.16DCFC90 Content-Type: application/octet-stream; name=".config" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename=".config" #=0A= # Automatically generated make config: don't edit=0A= #=0A= CONFIG_X86=3Dy=0A= CONFIG_MMU=3Dy=0A= CONFIG_UID16=3Dy=0A= CONFIG_GENERIC_ISA_DMA=3Dy=0A= =0A= #=0A= # Code maturity level options=0A= #=0A= CONFIG_EXPERIMENTAL=3Dy=0A= =0A= #=0A= # General setup=0A= #=0A= CONFIG_SWAP=3Dy=0A= CONFIG_SYSVIPC=3Dy=0A= # CONFIG_BSD_PROCESS_ACCT is not set=0A= CONFIG_SYSCTL=3Dy=0A= CONFIG_LOG_BUF_SHIFT=3D14=0A= # CONFIG_EMBEDDED is not set=0A= CONFIG_KALLSYMS=3Dy=0A= CONFIG_FUTEX=3Dy=0A= CONFIG_EPOLL=3Dy=0A= CONFIG_IOSCHED_AS=3Dy=0A= CONFIG_IOSCHED_DEADLINE=3Dy=0A= =0A= #=0A= # Loadable module support=0A= #=0A= CONFIG_MODULES=3Dy=0A= CONFIG_MODULE_UNLOAD=3Dy=0A= CONFIG_MODULE_FORCE_UNLOAD=3Dy=0A= CONFIG_OBSOLETE_MODPARM=3Dy=0A= # CONFIG_MODVERSIONS is not set=0A= CONFIG_KMOD=3Dy=0A= =0A= #=0A= # Processor type and features=0A= #=0A= CONFIG_X86_PC=3Dy=0A= # CONFIG_X86_VOYAGER is not set=0A= # CONFIG_X86_NUMAQ is not set=0A= # CONFIG_X86_SUMMIT is not set=0A= # CONFIG_X86_BIGSMP is not set=0A= # CONFIG_X86_VISWS is not set=0A= # CONFIG_X86_GENERICARCH is not set=0A= # CONFIG_X86_ES7000 is not set=0A= # CONFIG_M386 is not set=0A= # CONFIG_M486 is not set=0A= # CONFIG_M586 is not set=0A= # CONFIG_M586TSC is not set=0A= # CONFIG_M586MMX is not set=0A= # CONFIG_M686 is not set=0A= # CONFIG_MPENTIUMII is not set=0A= # CONFIG_MPENTIUMIII is not set=0A= CONFIG_MPENTIUM4=3Dy=0A= # CONFIG_MK6 is not set=0A= # CONFIG_MK7 is not set=0A= # CONFIG_MK8 is not set=0A= # CONFIG_MELAN is not set=0A= # CONFIG_MCRUSOE is not set=0A= # CONFIG_MWINCHIPC6 is not set=0A= # CONFIG_MWINCHIP2 is not set=0A= # CONFIG_MWINCHIP3D is not set=0A= # CONFIG_MCYRIXIII is not set=0A= # CONFIG_MVIAC3_2 is not set=0A= # CONFIG_X86_GENERIC is not set=0A= CONFIG_X86_CMPXCHG=3Dy=0A= CONFIG_X86_XADD=3Dy=0A= CONFIG_X86_L1_CACHE_SHIFT=3D7=0A= CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy=0A= CONFIG_X86_WP_WORKS_OK=3Dy=0A= CONFIG_X86_INVLPG=3Dy=0A= CONFIG_X86_BSWAP=3Dy=0A= CONFIG_X86_POPAD_OK=3Dy=0A= CONFIG_X86_GOOD_APIC=3Dy=0A= CONFIG_X86_INTEL_USERCOPY=3Dy=0A= CONFIG_X86_USE_PPRO_CHECKSUM=3Dy=0A= # CONFIG_HUGETLB_PAGE is not set=0A= # CONFIG_SMP is not set=0A= # CONFIG_PREEMPT is not set=0A= # CONFIG_X86_UP_APIC is not set=0A= CONFIG_X86_TSC=3Dy=0A= CONFIG_X86_MCE=3Dy=0A= # CONFIG_X86_MCE_NONFATAL is not set=0A= # CONFIG_TOSHIBA is not set=0A= # CONFIG_I8K is not set=0A= # CONFIG_MICROCODE is not set=0A= # CONFIG_X86_MSR is not set=0A= # CONFIG_X86_CPUID is not set=0A= CONFIG_EDD=3Dy=0A= CONFIG_NOHIGHMEM=3Dy=0A= # CONFIG_HIGHMEM4G is not set=0A= # CONFIG_HIGHMEM64G is not set=0A= # CONFIG_MATH_EMULATION is not set=0A= CONFIG_MTRR=3Dy=0A= =0A= #=0A= # Power management options (ACPI, APM)=0A= #=0A= # CONFIG_PM is not set=0A= =0A= #=0A= # ACPI Support=0A= #=0A= CONFIG_ACPI=3Dy=0A= CONFIG_ACPI_BOOT=3Dy=0A= # CONFIG_ACPI_SLEEP is not set=0A= CONFIG_ACPI_AC=3Dy=0A= CONFIG_ACPI_BATTERY=3Dy=0A= CONFIG_ACPI_BUTTON=3Dy=0A= CONFIG_ACPI_FAN=3Dy=0A= CONFIG_ACPI_PROCESSOR=3Dy=0A= CONFIG_ACPI_THERMAL=3Dy=0A= # CONFIG_ACPI_ASUS is not set=0A= # CONFIG_ACPI_TOSHIBA is not set=0A= CONFIG_ACPI_DEBUG=3Dy=0A= CONFIG_ACPI_BUS=3Dy=0A= CONFIG_ACPI_INTERPRETER=3Dy=0A= CONFIG_ACPI_EC=3Dy=0A= CONFIG_ACPI_POWER=3Dy=0A= CONFIG_ACPI_PCI=3Dy=0A= CONFIG_ACPI_SYSTEM=3Dy=0A= =0A= #=0A= # CPU Frequency scaling=0A= #=0A= # CONFIG_CPU_FREQ is not set=0A= =0A= #=0A= # Bus options (PCI, PCMCIA, EISA, MCA, ISA)=0A= #=0A= CONFIG_PCI=3Dy=0A= # CONFIG_PCI_GOBIOS is not set=0A= # CONFIG_PCI_GODIRECT is not set=0A= CONFIG_PCI_GOANY=3Dy=0A= CONFIG_PCI_BIOS=3Dy=0A= CONFIG_PCI_DIRECT=3Dy=0A= # CONFIG_PCI_LEGACY_PROC is not set=0A= CONFIG_PCI_NAMES=3Dy=0A= CONFIG_ISA=3Dy=0A= # CONFIG_EISA is not set=0A= # CONFIG_MCA is not set=0A= # CONFIG_SCx200 is not set=0A= CONFIG_HOTPLUG=3Dy=0A= =0A= #=0A= # PCMCIA/CardBus support=0A= #=0A= CONFIG_PCMCIA=3Dy=0A= # CONFIG_YENTA is not set=0A= # CONFIG_I82092 is not set=0A= # CONFIG_I82365 is not set=0A= # CONFIG_TCIC is not set=0A= CONFIG_PCMCIA_PROBE=3Dy=0A= =0A= #=0A= # PCI Hotplug Support=0A= #=0A= # CONFIG_HOTPLUG_PCI is not set=0A= =0A= #=0A= # Executable file formats=0A= #=0A= CONFIG_KCORE_ELF=3Dy=0A= # CONFIG_KCORE_AOUT is not set=0A= CONFIG_BINFMT_ELF=3Dy=0A= CONFIG_BINFMT_AOUT=3Dy=0A= CONFIG_BINFMT_MISC=3Dy=0A= =0A= #=0A= # Generic Driver Options=0A= #=0A= # CONFIG_FW_LOADER is not set=0A= =0A= #=0A= # Memory Technology Devices (MTD)=0A= #=0A= # CONFIG_MTD is not set=0A= =0A= #=0A= # Parallel port support=0A= #=0A= # CONFIG_PARPORT is not set=0A= =0A= #=0A= # Plug and Play support=0A= #=0A= # CONFIG_PNP is not set=0A= =0A= #=0A= # Block devices=0A= #=0A= # CONFIG_BLK_DEV_FD is not set=0A= # CONFIG_BLK_DEV_XD is not set=0A= # CONFIG_BLK_CPQ_DA is not set=0A= # CONFIG_BLK_CPQ_CISS_DA is not set=0A= # CONFIG_BLK_DEV_DAC960 is not set=0A= # CONFIG_BLK_DEV_UMEM is not set=0A= # CONFIG_BLK_DEV_LOOP is not set=0A= # CONFIG_BLK_DEV_NBD is not set=0A= # CONFIG_BLK_DEV_RAM is not set=0A= CONFIG_BLK_DEV_INITRD=3Dy=0A= CONFIG_LBD=3Dy=0A= =0A= #=0A= # ATA/ATAPI/MFM/RLL support=0A= #=0A= # CONFIG_IDE is not set=0A= =0A= #=0A= # SCSI device support=0A= #=0A= CONFIG_SCSI=3Dy=0A= =0A= #=0A= # SCSI support type (disk, tape, CD-ROM)=0A= #=0A= CONFIG_BLK_DEV_SD=3Dy=0A= # CONFIG_CHR_DEV_ST is not set=0A= # CONFIG_CHR_DEV_OSST is not set=0A= CONFIG_BLK_DEV_SR=3Dy=0A= CONFIG_BLK_DEV_SR_VENDOR=3Dy=0A= CONFIG_CHR_DEV_SG=3Dy=0A= =0A= #=0A= # Some SCSI devices (e.g. CD jukebox) support multiple LUNs=0A= #=0A= CONFIG_SCSI_MULTI_LUN=3Dy=0A= CONFIG_SCSI_REPORT_LUNS=3Dy=0A= CONFIG_SCSI_CONSTANTS=3Dy=0A= # CONFIG_SCSI_LOGGING is not set=0A= =0A= #=0A= # SCSI low-level drivers=0A= #=0A= # CONFIG_BLK_DEV_3W_XXXX_RAID is not set=0A= # CONFIG_SCSI_7000FASST is not set=0A= # CONFIG_SCSI_ACARD is not set=0A= # CONFIG_SCSI_AHA152X is not set=0A= # CONFIG_SCSI_AHA1542 is not set=0A= # CONFIG_SCSI_AACRAID is not set=0A= CONFIG_SCSI_AIC7XXX=3Dy=0A= CONFIG_AIC7XXX_CMDS_PER_DEVICE=3D64=0A= CONFIG_AIC7XXX_RESET_DELAY_MS=3D2000=0A= # CONFIG_AIC7XXX_PROBE_EISA_VL is not set=0A= # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set=0A= # CONFIG_AIC7XXX_DEBUG_ENABLE is not set=0A= CONFIG_AIC7XXX_DEBUG_MASK=3D0=0A= CONFIG_AIC7XXX_REG_PRETTY_PRINT=3Dy=0A= # CONFIG_SCSI_AIC7XXX_OLD is not set=0A= # CONFIG_SCSI_AIC79XX is not set=0A= # CONFIG_SCSI_DPT_I2O is not set=0A= # CONFIG_SCSI_ADVANSYS is not set=0A= # CONFIG_SCSI_IN2000 is not set=0A= # CONFIG_SCSI_AM53C974 is not set=0A= # CONFIG_SCSI_MEGARAID is not set=0A= # CONFIG_SCSI_BUSLOGIC is not set=0A= # CONFIG_SCSI_CPQFCTS is not set=0A= # CONFIG_SCSI_DMX3191D is not set=0A= # CONFIG_SCSI_DTC3280 is not set=0A= # CONFIG_SCSI_EATA is not set=0A= # CONFIG_SCSI_EATA_PIO is not set=0A= # CONFIG_SCSI_FUTURE_DOMAIN is not set=0A= # CONFIG_SCSI_GDTH is not set=0A= # CONFIG_SCSI_GENERIC_NCR5380 is not set=0A= # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set=0A= # CONFIG_SCSI_IPS is not set=0A= # CONFIG_SCSI_INITIO is not set=0A= # CONFIG_SCSI_INIA100 is not set=0A= # CONFIG_SCSI_NCR53C406A is not set=0A= # CONFIG_SCSI_SYM53C8XX_2 is not set=0A= # CONFIG_SCSI_SYM53C8XX is not set=0A= # CONFIG_SCSI_PAS16 is not set=0A= # CONFIG_SCSI_PCI2000 is not set=0A= # CONFIG_SCSI_PCI2220I is not set=0A= # CONFIG_SCSI_PSI240I is not set=0A= # CONFIG_SCSI_QLOGIC_FAS is not set=0A= # CONFIG_SCSI_QLOGIC_ISP is not set=0A= # CONFIG_SCSI_QLOGIC_FC is not set=0A= CONFIG_SCSI_QLOGIC_1280=3Dy=0A= # CONFIG_SCSI_SEAGATE is not set=0A= # CONFIG_SCSI_SYM53C416 is not set=0A= # CONFIG_SCSI_DC395x is not set=0A= # CONFIG_SCSI_DC390T is not set=0A= # CONFIG_SCSI_T128 is not set=0A= # CONFIG_SCSI_U14_34F is not set=0A= # CONFIG_SCSI_ULTRASTOR is not set=0A= # CONFIG_SCSI_NSP32 is not set=0A= # CONFIG_SCSI_DEBUG is not set=0A= =0A= #=0A= # PCMCIA SCSI adapter support=0A= #=0A= # CONFIG_PCMCIA_AHA152X is not set=0A= # CONFIG_PCMCIA_FDOMAIN is not set=0A= # CONFIG_PCMCIA_NINJA_SCSI is not set=0A= # CONFIG_PCMCIA_QLOGIC is not set=0A= =0A= #=0A= # Old CD-ROM drivers (not SCSI, not IDE)=0A= #=0A= # CONFIG_CD_NO_IDESCSI is not set=0A= =0A= #=0A= # Multi-device support (RAID and LVM)=0A= #=0A= # CONFIG_MD is not set=0A= =0A= #=0A= # Fusion MPT device support=0A= #=0A= # CONFIG_FUSION is not set=0A= =0A= #=0A= # IEEE 1394 (FireWire) support (EXPERIMENTAL)=0A= #=0A= # CONFIG_IEEE1394 is not set=0A= =0A= #=0A= # I2O device support=0A= #=0A= # CONFIG_I2O is not set=0A= =0A= #=0A= # Networking support=0A= #=0A= CONFIG_NET=3Dy=0A= =0A= #=0A= # Networking options=0A= #=0A= CONFIG_PACKET=3Dy=0A= # CONFIG_PACKET_MMAP is not set=0A= # CONFIG_NETLINK_DEV is not set=0A= CONFIG_UNIX=3Dy=0A= # CONFIG_NET_KEY is not set=0A= CONFIG_INET=3Dy=0A= CONFIG_IP_MULTICAST=3Dy=0A= # CONFIG_IP_ADVANCED_ROUTER is not set=0A= # CONFIG_IP_PNP is not set=0A= # CONFIG_NET_IPIP is not set=0A= # CONFIG_NET_IPGRE is not set=0A= # CONFIG_IP_MROUTE is not set=0A= # CONFIG_ARPD is not set=0A= # CONFIG_INET_ECN is not set=0A= # CONFIG_SYN_COOKIES is not set=0A= # CONFIG_INET_AH is not set=0A= # CONFIG_INET_ESP is not set=0A= # CONFIG_INET_IPCOMP is not set=0A= # CONFIG_IPV6 is not set=0A= # CONFIG_DECNET is not set=0A= # CONFIG_BRIDGE is not set=0A= # CONFIG_NETFILTER is not set=0A= # CONFIG_XFRM_USER is not set=0A= =0A= #=0A= # SCTP Configuration (EXPERIMENTAL)=0A= #=0A= CONFIG_IPV6_SCTP__=3Dy=0A= # CONFIG_IP_SCTP is not set=0A= # CONFIG_ATM is not set=0A= # CONFIG_VLAN_8021Q is not set=0A= # CONFIG_LLC is not set=0A= # CONFIG_X25 is not set=0A= # CONFIG_LAPB is not set=0A= # CONFIG_NET_DIVERT is not set=0A= # CONFIG_ECONET is not set=0A= # CONFIG_WAN_ROUTER is not set=0A= # CONFIG_NET_FASTROUTE is not set=0A= # CONFIG_NET_HW_FLOWCONTROL is not set=0A= =0A= #=0A= # QoS and/or fair queueing=0A= #=0A= # CONFIG_NET_SCHED is not set=0A= =0A= #=0A= # Network testing=0A= #=0A= # CONFIG_NET_PKTGEN is not set=0A= CONFIG_NETDEVICES=3Dy=0A= =0A= #=0A= # ARCnet devices=0A= #=0A= # CONFIG_ARCNET is not set=0A= CONFIG_DUMMY=3Dm=0A= # CONFIG_BONDING is not set=0A= # CONFIG_EQUALIZER is not set=0A= # CONFIG_TUN is not set=0A= # CONFIG_ETHERTAP is not set=0A= =0A= #=0A= # Ethernet (10 or 100Mbit)=0A= #=0A= CONFIG_NET_ETHERNET=3Dy=0A= # CONFIG_MII is not set=0A= # CONFIG_HAPPYMEAL is not set=0A= # CONFIG_SUNGEM is not set=0A= # CONFIG_NET_VENDOR_3COM is not set=0A= # CONFIG_LANCE is not set=0A= # CONFIG_NET_VENDOR_SMC is not set=0A= # CONFIG_NET_VENDOR_RACAL is not set=0A= =0A= #=0A= # Tulip family network device support=0A= #=0A= # CONFIG_NET_TULIP is not set=0A= # CONFIG_AT1700 is not set=0A= # CONFIG_DEPCA is not set=0A= # CONFIG_HP100 is not set=0A= # CONFIG_NET_ISA is not set=0A= CONFIG_NET_PCI=3Dy=0A= # CONFIG_PCNET32 is not set=0A= # CONFIG_AMD8111_ETH is not set=0A= # CONFIG_ADAPTEC_STARFIRE is not set=0A= # CONFIG_AC3200 is not set=0A= # CONFIG_APRICOT is not set=0A= # CONFIG_B44 is not set=0A= # CONFIG_CS89x0 is not set=0A= # CONFIG_DGRS is not set=0A= # CONFIG_EEPRO100 is not set=0A= CONFIG_E100=3Dy=0A= # CONFIG_FEALNX is not set=0A= # CONFIG_NATSEMI is not set=0A= # CONFIG_NE2K_PCI is not set=0A= # CONFIG_8139CP is not set=0A= # CONFIG_8139TOO is not set=0A= # CONFIG_SIS900 is not set=0A= # CONFIG_EPIC100 is not set=0A= # CONFIG_SUNDANCE is not set=0A= # CONFIG_TLAN is not set=0A= # CONFIG_VIA_RHINE is not set=0A= # CONFIG_NET_POCKET is not set=0A= =0A= #=0A= # Ethernet (1000 Mbit)=0A= #=0A= # CONFIG_ACENIC is not set=0A= # CONFIG_DL2K is not set=0A= # CONFIG_E1000 is not set=0A= # CONFIG_NS83820 is not set=0A= # CONFIG_HAMACHI is not set=0A= # CONFIG_YELLOWFIN is not set=0A= # CONFIG_R8169 is not set=0A= # CONFIG_SK98LIN is not set=0A= # CONFIG_TIGON3 is not set=0A= =0A= #=0A= # Ethernet (10000 Mbit)=0A= #=0A= # CONFIG_IXGB is not set=0A= # CONFIG_FDDI is not set=0A= # CONFIG_HIPPI is not set=0A= # CONFIG_PPP is not set=0A= # CONFIG_SLIP is not set=0A= =0A= #=0A= # Wireless LAN (non-hamradio)=0A= #=0A= # CONFIG_NET_RADIO is not set=0A= =0A= #=0A= # Token Ring devices (depends on LLC=3Dy)=0A= #=0A= # CONFIG_NET_FC is not set=0A= # CONFIG_RCPCI is not set=0A= # CONFIG_SHAPER is not set=0A= =0A= #=0A= # Wan interfaces=0A= #=0A= # CONFIG_WAN is not set=0A= =0A= #=0A= # PCMCIA network device support=0A= #=0A= CONFIG_NET_PCMCIA=3Dy=0A= # CONFIG_PCMCIA_3C589 is not set=0A= # CONFIG_PCMCIA_3C574 is not set=0A= # CONFIG_PCMCIA_FMVJ18X is not set=0A= CONFIG_PCMCIA_PCNET=3Dy=0A= # CONFIG_PCMCIA_NMCLAN is not set=0A= # CONFIG_PCMCIA_SMC91C92 is not set=0A= # CONFIG_PCMCIA_XIRC2PS is not set=0A= # CONFIG_PCMCIA_AXNET is not set=0A= =0A= #=0A= # Amateur Radio support=0A= #=0A= # CONFIG_HAMRADIO is not set=0A= =0A= #=0A= # IrDA (infrared) support=0A= #=0A= # CONFIG_IRDA is not set=0A= =0A= #=0A= # ISDN subsystem=0A= #=0A= # CONFIG_ISDN_BOOL is not set=0A= =0A= #=0A= # Telephony Support=0A= #=0A= # CONFIG_PHONE is not set=0A= =0A= #=0A= # Input device support=0A= #=0A= CONFIG_INPUT=3Dy=0A= =0A= #=0A= # Userland interfaces=0A= #=0A= CONFIG_INPUT_MOUSEDEV=3Dy=0A= CONFIG_INPUT_MOUSEDEV_PSAUX=3Dy=0A= CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024=0A= CONFIG_INPUT_MOUSEDEV_SCREEN_Y=3D768=0A= # CONFIG_INPUT_JOYDEV is not set=0A= # CONFIG_INPUT_TSDEV is not set=0A= # CONFIG_INPUT_EVDEV is not set=0A= # CONFIG_INPUT_EVBUG is not set=0A= =0A= #=0A= # Input I/O drivers=0A= #=0A= # CONFIG_GAMEPORT is not set=0A= CONFIG_SOUND_GAMEPORT=3Dy=0A= CONFIG_SERIO=3Dy=0A= CONFIG_SERIO_I8042=3Dy=0A= # CONFIG_SERIO_SERPORT is not set=0A= # CONFIG_SERIO_CT82C710 is not set=0A= # CONFIG_SERIO_PCIPS2 is not set=0A= =0A= #=0A= # Input Device Drivers=0A= #=0A= CONFIG_INPUT_KEYBOARD=3Dy=0A= CONFIG_KEYBOARD_ATKBD=3Dy=0A= # CONFIG_KEYBOARD_SUNKBD is not set=0A= # CONFIG_KEYBOARD_XTKBD is not set=0A= # CONFIG_KEYBOARD_NEWTON is not set=0A= CONFIG_INPUT_MOUSE=3Dy=0A= CONFIG_MOUSE_PS2=3Dy=0A= # CONFIG_MOUSE_SERIAL is not set=0A= # CONFIG_MOUSE_INPORT is not set=0A= # CONFIG_MOUSE_LOGIBM is not set=0A= # CONFIG_MOUSE_PC110PAD is not set=0A= # CONFIG_INPUT_JOYSTICK is not set=0A= # CONFIG_INPUT_TOUCHSCREEN is not set=0A= # CONFIG_INPUT_MISC is not set=0A= =0A= #=0A= # Character devices=0A= #=0A= CONFIG_VT=3Dy=0A= CONFIG_VT_CONSOLE=3Dy=0A= CONFIG_HW_CONSOLE=3Dy=0A= # CONFIG_SERIAL_NONSTANDARD is not set=0A= =0A= #=0A= # Serial drivers=0A= #=0A= CONFIG_SERIAL_8250=3Dy=0A= # CONFIG_SERIAL_8250_CONSOLE is not set=0A= # CONFIG_SERIAL_8250_CS is not set=0A= # CONFIG_SERIAL_8250_ACPI is not set=0A= # CONFIG_SERIAL_8250_EXTENDED is not set=0A= =0A= #=0A= # Non-8250 serial port support=0A= #=0A= CONFIG_SERIAL_CORE=3Dy=0A= # CONFIG_UNIX98_PTYS is not set=0A= =0A= #=0A= # I2C support=0A= #=0A= # CONFIG_I2C is not set=0A= =0A= #=0A= # I2C Hardware Sensors Mainboard support=0A= #=0A= =0A= #=0A= # I2C Hardware Sensors Chip support=0A= #=0A= # CONFIG_I2C_SENSOR is not set=0A= =0A= #=0A= # Mice=0A= #=0A= # CONFIG_BUSMOUSE is not set=0A= # CONFIG_QIC02_TAPE is not set=0A= =0A= #=0A= # IPMI=0A= #=0A= # CONFIG_IPMI_HANDLER is not set=0A= =0A= #=0A= # Watchdog Cards=0A= #=0A= # CONFIG_WATCHDOG is not set=0A= # CONFIG_HW_RANDOM is not set=0A= # CONFIG_NVRAM is not set=0A= # CONFIG_RTC is not set=0A= # CONFIG_GEN_RTC is not set=0A= # CONFIG_DTLK is not set=0A= # CONFIG_R3964 is not set=0A= # CONFIG_APPLICOM is not set=0A= # CONFIG_SONYPI is not set=0A= =0A= #=0A= # Ftape, the floppy tape device driver=0A= #=0A= # CONFIG_FTAPE is not set=0A= # CONFIG_AGP is not set=0A= # CONFIG_DRM is not set=0A= =0A= #=0A= # PCMCIA character devices=0A= #=0A= # CONFIG_SYNCLINK_CS is not set=0A= # CONFIG_MWAVE is not set=0A= # CONFIG_RAW_DRIVER is not set=0A= # CONFIG_HANGCHECK_TIMER is not set=0A= =0A= #=0A= # Multimedia devices=0A= #=0A= # CONFIG_VIDEO_DEV is not set=0A= =0A= #=0A= # Digital Video Broadcasting Devices=0A= #=0A= # CONFIG_DVB is not set=0A= =0A= #=0A= # File systems=0A= #=0A= CONFIG_EXT2_FS=3Dy=0A= CONFIG_EXT2_FS_XATTR=3Dy=0A= # CONFIG_EXT2_FS_POSIX_ACL is not set=0A= # CONFIG_EXT2_FS_SECURITY is not set=0A= # CONFIG_EXT3_FS is not set=0A= # CONFIG_JBD is not set=0A= CONFIG_FS_MBCACHE=3Dy=0A= # CONFIG_REISERFS_FS is not set=0A= # CONFIG_JFS_FS is not set=0A= # CONFIG_XFS_FS is not set=0A= # CONFIG_MINIX_FS is not set=0A= # CONFIG_ROMFS_FS is not set=0A= # CONFIG_QUOTA is not set=0A= # CONFIG_AUTOFS_FS is not set=0A= # CONFIG_AUTOFS4_FS is not set=0A= =0A= #=0A= # CD-ROM/DVD Filesystems=0A= #=0A= CONFIG_ISO9660_FS=3Dy=0A= CONFIG_JOLIET=3Dy=0A= # CONFIG_ZISOFS is not set=0A= CONFIG_UDF_FS=3Dy=0A= =0A= #=0A= # DOS/FAT/NT Filesystems=0A= #=0A= CONFIG_FAT_FS=3Dy=0A= CONFIG_MSDOS_FS=3Dy=0A= CONFIG_VFAT_FS=3Dy=0A= # CONFIG_NTFS_FS is not set=0A= =0A= #=0A= # Pseudo filesystems=0A= #=0A= CONFIG_PROC_FS=3Dy=0A= # CONFIG_DEVFS_FS is not set=0A= CONFIG_TMPFS=3Dy=0A= CONFIG_RAMFS=3Dy=0A= =0A= #=0A= # Miscellaneous filesystems=0A= #=0A= # CONFIG_ADFS_FS is not set=0A= # CONFIG_AFFS_FS is not set=0A= # CONFIG_HFS_FS is not set=0A= # CONFIG_BEFS_FS is not set=0A= # CONFIG_BFS_FS is not set=0A= # CONFIG_EFS_FS is not set=0A= # CONFIG_CRAMFS is not set=0A= # CONFIG_VXFS_FS is not set=0A= # CONFIG_HPFS_FS is not set=0A= # CONFIG_QNX4FS_FS is not set=0A= # CONFIG_SYSV_FS is not set=0A= # CONFIG_UFS_FS is not set=0A= =0A= #=0A= # Network File Systems=0A= #=0A= CONFIG_NFS_FS=3Dy=0A= # CONFIG_NFS_V3 is not set=0A= # CONFIG_NFS_V4 is not set=0A= # CONFIG_NFSD is not set=0A= CONFIG_LOCKD=3Dy=0A= # CONFIG_EXPORTFS is not set=0A= CONFIG_SUNRPC=3Dy=0A= # CONFIG_SUNRPC_GSS is not set=0A= # CONFIG_SMB_FS is not set=0A= # CONFIG_CIFS is not set=0A= # CONFIG_NCP_FS is not set=0A= # CONFIG_CODA_FS is not set=0A= # CONFIG_INTERMEZZO_FS is not set=0A= # CONFIG_AFS_FS is not set=0A= =0A= #=0A= # Partition Types=0A= #=0A= # CONFIG_PARTITION_ADVANCED is not set=0A= CONFIG_MSDOS_PARTITION=3Dy=0A= CONFIG_NLS=3Dy=0A= =0A= #=0A= # Native Language Support=0A= #=0A= CONFIG_NLS_DEFAULT=3D"iso8859-1"=0A= CONFIG_NLS_CODEPAGE_437=3Dy=0A= # CONFIG_NLS_CODEPAGE_737 is not set=0A= # CONFIG_NLS_CODEPAGE_775 is not set=0A= # CONFIG_NLS_CODEPAGE_850 is not set=0A= # CONFIG_NLS_CODEPAGE_852 is not set=0A= # CONFIG_NLS_CODEPAGE_855 is not set=0A= # CONFIG_NLS_CODEPAGE_857 is not set=0A= # CONFIG_NLS_CODEPAGE_860 is not set=0A= # CONFIG_NLS_CODEPAGE_861 is not set=0A= # CONFIG_NLS_CODEPAGE_862 is not set=0A= # CONFIG_NLS_CODEPAGE_863 is not set=0A= # CONFIG_NLS_CODEPAGE_864 is not set=0A= # CONFIG_NLS_CODEPAGE_865 is not set=0A= # CONFIG_NLS_CODEPAGE_866 is not set=0A= # CONFIG_NLS_CODEPAGE_869 is not set=0A= # CONFIG_NLS_CODEPAGE_936 is not set=0A= # CONFIG_NLS_CODEPAGE_950 is not set=0A= # CONFIG_NLS_CODEPAGE_932 is not set=0A= # CONFIG_NLS_CODEPAGE_949 is not set=0A= # CONFIG_NLS_CODEPAGE_874 is not set=0A= # CONFIG_NLS_ISO8859_8 is not set=0A= # CONFIG_NLS_CODEPAGE_1250 is not set=0A= # CONFIG_NLS_CODEPAGE_1251 is not set=0A= CONFIG_NLS_ISO8859_1=3Dy=0A= # CONFIG_NLS_ISO8859_2 is not set=0A= # CONFIG_NLS_ISO8859_3 is not set=0A= # CONFIG_NLS_ISO8859_4 is not set=0A= # CONFIG_NLS_ISO8859_5 is not set=0A= # CONFIG_NLS_ISO8859_6 is not set=0A= # CONFIG_NLS_ISO8859_7 is not set=0A= # CONFIG_NLS_ISO8859_9 is not set=0A= # CONFIG_NLS_ISO8859_13 is not set=0A= # CONFIG_NLS_ISO8859_14 is not set=0A= # CONFIG_NLS_ISO8859_15 is not set=0A= # CONFIG_NLS_KOI8_R is not set=0A= # CONFIG_NLS_KOI8_U is not set=0A= # CONFIG_NLS_UTF8 is not set=0A= =0A= #=0A= # Graphics support=0A= #=0A= # CONFIG_FB is not set=0A= # CONFIG_VIDEO_SELECT is not set=0A= =0A= #=0A= # Console display driver support=0A= #=0A= CONFIG_VGA_CONSOLE=3Dy=0A= # CONFIG_MDA_CONSOLE is not set=0A= CONFIG_DUMMY_CONSOLE=3Dy=0A= =0A= #=0A= # Sound=0A= #=0A= # CONFIG_SOUND is not set=0A= =0A= #=0A= # USB support=0A= #=0A= # CONFIG_USB is not set=0A= # CONFIG_USB_GADGET is not set=0A= =0A= #=0A= # Bluetooth support=0A= #=0A= # CONFIG_BT is not set=0A= =0A= #=0A= # Profiling support=0A= #=0A= # CONFIG_PROFILING is not set=0A= =0A= #=0A= # Kernel hacking=0A= #=0A= # CONFIG_DEBUG_KERNEL is not set=0A= CONFIG_DEBUG_SPINLOCK_SLEEP=3Dy=0A= CONFIG_FRAME_POINTER=3Dy=0A= =0A= #=0A= # Security options=0A= #=0A= # CONFIG_SECURITY is not set=0A= =0A= #=0A= # Cryptographic options=0A= #=0A= # CONFIG_CRYPTO is not set=0A= =0A= #=0A= # Library routines=0A= #=0A= # CONFIG_CRC32 is not set=0A= CONFIG_X86_BIOS_REBOOT=3Dy=0A= ------=_NextPart_000_007B_01C36703.16DCFC90-- -- This message was distributed to subscribers of the selinux mailing list. If you no longer wish to subscribe, send mail to majordomo@tycho.nsa.gov with the words "unsubscribe selinux" without quotes as the message.