Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 929031091914 for ; Fri, 20 Mar 2026 09:29:37 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 12ABF83F8A; Fri, 20 Mar 2026 10:29:36 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (1024-bit key; unprotected) header.d=ti.com header.i=@ti.com header.b="d3NvUEXp"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 34A2983FA4; Fri, 20 Mar 2026 10:29:35 +0100 (CET) Received: from CO1PR03CU002.outbound.protection.outlook.com (mail-westus2azlp170100005.outbound.protection.outlook.com [IPv6:2a01:111:f403:c005::5]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 422BC83CF5 for ; Fri, 20 Mar 2026 10:29:30 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=quarantine dis=none) header.from=ti.com Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=anshuld@ti.com ARC-Seal: i=1; a=rsa-sha256; s=arcselector10001; d=microsoft.com; cv=none; b=s+YdAA1z42c284q1IiAHD4hNlpWd70qcGawTWl3hIRmovDSZPE1Lbw5/Y6FHsJbj+IGSzY2EpMV25+BT69naEVWaL2E9xTj3SXaeXedPiekDTxn+HUVm4a+HCeFoAgWQChpfX9yeRr3XwuvimNnLecQ1KtXfdBMfxUBjj3ALtdVwFEXaCmK0diVotyqQOsVIV2Nz0Or2T4lFyD7cqPhC68Ik3nH88F/aP6aiDTbM7oBJIMI+K6juCaw75PQm02xupsACMh2IL9IK/wOC25Sey+UrKfCJY7nwppRYTO6twoSv6ycZSf1WHl5ioUyJcAFf+jo2XHCpzjqXFQLi5HHmVw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector10001; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=XkTl3PcS88L5MlByMdT9tvnARjP+dSIA1v8AutlWOCA=; b=luDXoVT34SiSxmxl+OIlovSSFj1uiB2EohkxMjUbOhvv5YBMSwP2B7jcpuMiuRQ6tSI4Aegdl+Jc/yPzcBkaO100lkXh3rJZuS+mtpBO0vs78UfPsINz+WLcBr5oGp1NN6zSIzNXdmAIFYhfJBhaiq2FqapckwwTVTPJgvnbwlGrKy1I8eq3Rm2DxjS/T2GASJIW8LUgZl3cOV8xootN1PCifuq3RxfTUQiV4QhMti/+pGV8Xn62CckHLuVRn5o90GBtToiOwdxG5oF4uKbBWTe2mgyA1veiFo0uX+KHVH68DnOXnC+Qt2sMSo97JpqyH3D/ohmwnkPrq/nZHLFAAw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass (sender ip is 198.47.23.194) smtp.rcpttodomain=lists.denx.de smtp.mailfrom=ti.com; dmarc=pass (p=quarantine sp=none pct=100) action=none header.from=ti.com; dkim=none (message not signed); arc=none (0) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-SenderADCheck; bh=XkTl3PcS88L5MlByMdT9tvnARjP+dSIA1v8AutlWOCA=; b=d3NvUEXp9PEfsBNmhRzBqVKnCK6p7dTqIGALSijXrL/8VvpNgtCIGCBtBWsq52HAc4YiYhUaDi0QAvBf+Jv+SJyPhFkGuGf0aPBmdJSrULgoIwDxWLvLfKk32j42LGMckyoqOsCRRbE0l9BB5lXl6qaahfPOxZWmroHXUgLaxyw= Received: from MN2PR06CA0013.namprd06.prod.outlook.com (2603:10b6:208:23d::18) by BN0PR10MB4855.namprd10.prod.outlook.com (2603:10b6:408:122::8) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.9723.23; Fri, 20 Mar 2026 09:29:26 +0000 Received: from BL6PEPF0001AB74.namprd02.prod.outlook.com (2603:10b6:208:23d:cafe::65) by MN2PR06CA0013.outlook.office365.com (2603:10b6:208:23d::18) with Microsoft SMTP Server (version=TLS1_3, cipher=TLS_AES_256_GCM_SHA384) id 15.20.9723.23 via Frontend Transport; Fri, 20 Mar 2026 09:29:24 +0000 X-MS-Exchange-Authentication-Results: spf=pass (sender IP is 198.47.23.194) smtp.mailfrom=ti.com; dkim=none (message not signed) header.d=none; dmarc=pass action=none header.from=ti.com; Received-SPF: Pass (protection.outlook.com: domain of ti.com designates 198.47.23.194 as permitted sender) receiver=protection.outlook.com; client-ip=198.47.23.194; helo=lewvzet200.ext.ti.com; pr=C Received: from lewvzet200.ext.ti.com (198.47.23.194) by BL6PEPF0001AB74.mail.protection.outlook.com (10.167.242.167) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.9700.17 via Frontend Transport; Fri, 20 Mar 2026 09:29:26 +0000 Received: from DLEE209.ent.ti.com (157.170.170.98) by lewvzet200.ext.ti.com (10.4.14.103) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.20; Fri, 20 Mar 2026 04:29:25 -0500 Received: from DLEE208.ent.ti.com (157.170.170.97) by DLEE209.ent.ti.com (157.170.170.98) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.20; Fri, 20 Mar 2026 04:29:25 -0500 Received: from lelvem-mr06.itg.ti.com (10.180.75.8) by DLEE208.ent.ti.com (157.170.170.97) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.2562.20 via Frontend Transport; Fri, 20 Mar 2026 04:29:25 -0500 Received: from localhost (ada0543016.dhcp.ti.com [172.24.233.9]) by lelvem-mr06.itg.ti.com (8.18.1/8.18.1) with ESMTP id 62K9TOtd3595525; Fri, 20 Mar 2026 04:29:24 -0500 MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="UTF-8" Date: Fri, 20 Mar 2026 14:59:23 +0530 Message-ID: CC: Subject: Re: [PATCH 2/3] k3-am62-pocketbeagle2: add initial board support From: Anshul Dalal To: , , , , , X-Mailer: aerc 0.21.0-0-g5549850facc2 References: <20260317223800.776581-1-rs@ti.com> <20260317223800.776581-3-rs@ti.com> In-Reply-To: <20260317223800.776581-3-rs@ti.com> X-C2ProcessedOrg: 333ef613-75bf-4e12-a4b1-8e3623f5dcea X-EOPAttributedMessage: 0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: BL6PEPF0001AB74:EE_|BN0PR10MB4855:EE_ X-MS-Office365-Filtering-Correlation-Id: fe75cc4c-2afe-44d6-13f7-08de86632df0 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; ARA:13230040|36860700016|82310400026|376014|1800799024|18002099003|56012099003|22082099003|13003099007; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:198.47.23.194; CTRY:US; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:lewvzet200.ext.ti.com; PTR:InfoDomainNonexistent; CAT:NONE; SFS:(13230040)(36860700016)(82310400026)(376014)(1800799024)(18002099003)(56012099003)(22082099003)(13003099007); DIR:OUT; SFP:1101; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 9Hs2y5B6dbzwdna4/6y8/CUj2NtHSDoj0p2qwF7T8XffsXImvBUgNcB7EDGt2ZCVxAmLR2/ysHFoNWGuRE/QBjwkNv6AGOXy7zY2DtR5wsySEQX3h66G9PJWH1M1q272jaLlvXbk/cUhn3Vq7ITEVft4rawTGsTDYC8k3drqiDDonv1zCfMkVhuV68Uz+NVxcKkkM4IglsLI8AmvKz6XCEp82F5v4Dpash4PiDSMJgDHYsgz0XkpBzznToLJyNmYlpHfMKeSrcBWF4XGNg+RRLTkjDHYxnc3+Ru/IGhVtodnKhD+T+Tjf6ds8ojA1GuBkT1jdjEQYvuljNS84nyLlDMyMMFUZzqXWv5ymzfRNWX2S3y2D2Gyn0lc511lgKGAYAOxLY6XBisrobDS4+wRfMr+CAlcWRWsB/eR+cNQPmeyi0sjarVM8ciieG0tSi+o X-OriginatorOrg: ti.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 20 Mar 2026 09:29:26.2681 (UTC) X-MS-Exchange-CrossTenant-Network-Message-Id: fe75cc4c-2afe-44d6-13f7-08de86632df0 X-MS-Exchange-CrossTenant-Id: e5b49634-450b-4709-8abb-1e2b19b982b7 X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=e5b49634-450b-4709-8abb-1e2b19b982b7; Ip=[198.47.23.194]; Helo=[lewvzet200.ext.ti.com] X-MS-Exchange-CrossTenant-AuthSource: BL6PEPF0001AB74.namprd02.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Anonymous X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: BN0PR10MB4855 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean On Wed Mar 18, 2026 at 4:07 AM IST, rs wrote: > From: Randolph Sapp > > Add initial board support for the PocketBeagle 2, based on Robert Nelson > and Bryan Brattlof's work. Unify all debug consoles to main_uart6. Use > DDR config v10.32 from our sysconfig tool [1] for Kingston's memory [2], > (4Gb Desnity with a CL of 11 and CWL of 9). Add support for the > SPL_TEXT_BASE config parameter. Ensure all files have a summary and SPDX > identifier. > > [1] https://dev.ti.com/sysconfig > [2] https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/6465/D25= 16AN9EXGXN-TU.pdf > > Signed-off-by: Randolph Sapp > --- > ...> k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi} | 92 +++--- > ...dtsi =3D> k3-am62-pocketbeagle2-u-boot.dtsi} | 154 ++++++---- > arch/arm/dts/k3-am62-r5-pocketbeagle2.dts | 35 +++ > arch/arm/mach-k3/am62x/Kconfig | 1 + > board/beagle/pocketbeagle2/Kconfig | 60 ++++ > board/beagle/pocketbeagle2/MAINTAINERS | 10 + > board/beagle/pocketbeagle2/Makefile | 9 + > .../board-cfg.yaml | 0 > .../{beagleplay =3D> pocketbeagle2}/pm-cfg.yaml | 0 > board/beagle/pocketbeagle2/pocketbeagle2.c | 39 +++ > .../pocketbeagle2/pocketbeagle2.env} | 21 +- > .../pocketbeagle2}/rm-cfg.yaml | 0 > .../sec-cfg.yaml | 0 > ...onfig =3D> am62_pocketbeagle2_a53_defconfig} | 16 +- > ...config =3D> am62_pocketbeagle2_r5_defconfig} | 7 +- > doc/board/beagle/am62_pocketbeagle2.rst | 277 ++++++++++++++++++ > doc/board/beagle/index.rst | 1 + > .../src/arm64/ti/k3-am62-pocketbeagle2.dts | 43 +++ > .../configs/{beagley_ai.h =3D> pocketbeagle2.h} | 8 +- > 19 files changed, 646 insertions(+), 127 deletions(-) > copy arch/arm/dts/{k3-am62x-sk-ddr4-1600MTs.dtsi =3D> k3-am62-pocketbeag= le2-ddr4-1600MTs.dtsi} (97%) > copy arch/arm/dts/{k3-am67a-beagley-ai-u-boot.dtsi =3D> k3-am62-pocketbe= agle2-u-boot.dtsi} (53%) > create mode 100644 arch/arm/dts/k3-am62-r5-pocketbeagle2.dts > create mode 100644 board/beagle/pocketbeagle2/Kconfig > create mode 100644 board/beagle/pocketbeagle2/MAINTAINERS > create mode 100644 board/beagle/pocketbeagle2/Makefile > copy board/beagle/{beagleplay =3D> pocketbeagle2}/board-cfg.yaml (100%) > copy board/beagle/{beagleplay =3D> pocketbeagle2}/pm-cfg.yaml (100%) > create mode 100644 board/beagle/pocketbeagle2/pocketbeagle2.c > copy board/{ti/am62x/am62x.env =3D> beagle/pocketbeagle2/pocketbeagle2.e= nv} (59%) > copy board/{phytec/phycore_am62x =3D> beagle/pocketbeagle2}/rm-cfg.yaml = (100%) > copy board/beagle/{beagleplay =3D> pocketbeagle2}/sec-cfg.yaml (100%) > copy configs/{am62x_beagleplay_a53_defconfig =3D> am62_pocketbeagle2_a53= _defconfig} (91%) > copy configs/{am62x_beagleplay_r5_defconfig =3D> am62_pocketbeagle2_r5_d= efconfig} (93%) > create mode 100644 doc/board/beagle/am62_pocketbeagle2.rst > copy include/configs/{beagley_ai.h =3D> pocketbeagle2.h} (57%) > > diff --git a/arch/arm/dts/k3-am62x-sk-ddr4-1600MTs.dtsi b/arch/arm/dts/k3= -am62-pocketbeagle2-ddr4-1600MTs.dtsi > similarity index 97% > copy from arch/arm/dts/k3-am62x-sk-ddr4-1600MTs.dtsi > copy to arch/arm/dts/k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi > index 4afa68a6739..455a55f2c0d 100644 > --- a/arch/arm/dts/k3-am62x-sk-ddr4-1600MTs.dtsi > +++ b/arch/arm/dts/k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi > @@ -2,20 +2,22 @@ > /* > * This file was generated with the > * AM623/AM625 SysConfig DDR Configuration Tool for AM64x, AM625, AM623,= AM62Ax, AM62Px, AM62Dx, AM62Lx v0.10.32 > - * Fri Jan 30 2026 13:45:31 GMT+0530 (India Standard Time) > + * Mon Jan 26 2026 10:31:36 GMT-0600 (Central Standard Time) > * DDR Type: DDR4 > * Frequency =3D 800MHz (1600MTs) > - * Density: 16Gb > + * Density: 4Gb > * Number of Ranks: 1 > */ > =20 > + > #define DDRSS_PLL_FHS_CNT 6 > #define DDRSS_PLL_FREQUENCY_1 400000000 > #define DDRSS_PLL_FREQUENCY_2 400000000 > -#define DDRSS_SDRAM_IDX 15 > +#define DDRSS_SDRAM_IDX 13 > #define DDRSS_REGION_IDX 16 > #define DDRSS_TOOL_VERSION "0.10.32" > =20 > + > #define DDRSS_CTL_0_DATA 0x00000A00 > #define DDRSS_CTL_1_DATA 0x00000000 > #define DDRSS_CTL_2_DATA 0x00000000 > @@ -54,11 +56,11 @@ > #define DDRSS_CTL_35_DATA 0x00000000 > #define DDRSS_CTL_36_DATA 0x00000000 > #define DDRSS_CTL_37_DATA 0x00000000 > -#define DDRSS_CTL_38_DATA 0x0000091C > +#define DDRSS_CTL_38_DATA 0x00000916 > #define DDRSS_CTL_39_DATA 0x18181818 > -#define DDRSS_CTL_40_DATA 0x0000091C > +#define DDRSS_CTL_40_DATA 0x00000916 > #define DDRSS_CTL_41_DATA 0x18181818 > -#define DDRSS_CTL_42_DATA 0x0000091C > +#define DDRSS_CTL_42_DATA 0x00000916 > #define DDRSS_CTL_43_DATA 0x18181818 > #define DDRSS_CTL_44_DATA 0x05050404 > #define DDRSS_CTL_45_DATA 0x00002706 > @@ -220,22 +222,22 @@ > #define DDRSS_CTL_201_DATA 0x00000000 > #define DDRSS_CTL_202_DATA 0x00000000 > #define DDRSS_CTL_203_DATA 0x00000000 > -#define DDRSS_CTL_204_DATA 0x00042400 > +#define DDRSS_CTL_204_DATA 0x00041000 > #define DDRSS_CTL_205_DATA 0x00000301 > #define DDRSS_CTL_206_DATA 0x00000000 > -#define DDRSS_CTL_207_DATA 0x00000424 > +#define DDRSS_CTL_207_DATA 0x00000410 > #define DDRSS_CTL_208_DATA 0x00000301 > #define DDRSS_CTL_209_DATA 0x00000000 > -#define DDRSS_CTL_210_DATA 0x00000424 > +#define DDRSS_CTL_210_DATA 0x00000410 > #define DDRSS_CTL_211_DATA 0x00000301 > #define DDRSS_CTL_212_DATA 0x00000000 > -#define DDRSS_CTL_213_DATA 0x00000424 > +#define DDRSS_CTL_213_DATA 0x00000410 > #define DDRSS_CTL_214_DATA 0x00000301 > #define DDRSS_CTL_215_DATA 0x00000000 > -#define DDRSS_CTL_216_DATA 0x00000424 > +#define DDRSS_CTL_216_DATA 0x00000410 > #define DDRSS_CTL_217_DATA 0x00000301 > #define DDRSS_CTL_218_DATA 0x00000000 > -#define DDRSS_CTL_219_DATA 0x00000424 > +#define DDRSS_CTL_219_DATA 0x00000410 > #define DDRSS_CTL_220_DATA 0x00000301 > #define DDRSS_CTL_221_DATA 0x00000000 > #define DDRSS_CTL_222_DATA 0x00000000 > @@ -333,8 +335,8 @@ > #define DDRSS_CTL_314_DATA 0x00000000 > #define DDRSS_CTL_315_DATA 0x00000100 > #define DDRSS_CTL_316_DATA 0x01010000 > -#define DDRSS_CTL_317_DATA 0x00000000 > -#define DDRSS_CTL_318_DATA 0x3FFF0000 > +#define DDRSS_CTL_317_DATA 0x00000202 > +#define DDRSS_CTL_318_DATA 0x0FFF0000 > #define DDRSS_CTL_319_DATA 0x000FFF00 > #define DDRSS_CTL_320_DATA 0xFFFFFFFF > #define DDRSS_CTL_321_DATA 0x00FFFF00 > @@ -391,8 +393,8 @@ > #define DDRSS_CTL_372_DATA 0x06060806 > #define DDRSS_CTL_373_DATA 0x00010101 > #define DDRSS_CTL_374_DATA 0x02000000 > -#define DDRSS_CTL_375_DATA 0x05020101 > -#define DDRSS_CTL_376_DATA 0x00000505 > +#define DDRSS_CTL_375_DATA 0x02020101 > +#define DDRSS_CTL_376_DATA 0x00000202 > #define DDRSS_CTL_377_DATA 0x02020200 > #define DDRSS_CTL_378_DATA 0x02020202 > #define DDRSS_CTL_379_DATA 0x02020202 > @@ -408,7 +410,7 @@ > #define DDRSS_CTL_389_DATA 0x00000200 > #define DDRSS_CTL_390_DATA 0x0000DB60 > #define DDRSS_CTL_391_DATA 0x0001E780 > -#define DDRSS_CTL_392_DATA 0x080D0302 > +#define DDRSS_CTL_392_DATA 0x050A0302 > #define DDRSS_CTL_393_DATA 0x001E0506 > #define DDRSS_CTL_394_DATA 0x000030C0 > #define DDRSS_CTL_395_DATA 0x00000200 > @@ -417,7 +419,7 @@ > #define DDRSS_CTL_398_DATA 0x00000200 > #define DDRSS_CTL_399_DATA 0x0000DB60 > #define DDRSS_CTL_400_DATA 0x0001E780 > -#define DDRSS_CTL_401_DATA 0x080D0302 > +#define DDRSS_CTL_401_DATA 0x050A0302 > #define DDRSS_CTL_402_DATA 0x001E0506 > #define DDRSS_CTL_403_DATA 0x000030C0 > #define DDRSS_CTL_404_DATA 0x00000200 > @@ -426,7 +428,7 @@ > #define DDRSS_CTL_407_DATA 0x00000200 > #define DDRSS_CTL_408_DATA 0x0000DB60 > #define DDRSS_CTL_409_DATA 0x0001E780 > -#define DDRSS_CTL_410_DATA 0x080D0302 > +#define DDRSS_CTL_410_DATA 0x050A0302 > #define DDRSS_CTL_411_DATA 0x00000506 > #define DDRSS_CTL_412_DATA 0x00000000 > #define DDRSS_CTL_413_DATA 0x0302000A > @@ -516,7 +518,7 @@ > #define DDRSS_PI_74_DATA 0x00000000 > #define DDRSS_PI_75_DATA 0x00000005 > #define DDRSS_PI_76_DATA 0x01000000 > -#define DDRSS_PI_77_DATA 0x04000100 > +#define DDRSS_PI_77_DATA 0x04020100 > #define DDRSS_PI_78_DATA 0x00020000 > #define DDRSS_PI_79_DATA 0x00010002 > #define DDRSS_PI_80_DATA 0x00000001 > @@ -606,14 +608,14 @@ > #define DDRSS_PI_164_DATA 0x00007800 > #define DDRSS_PI_165_DATA 0x00780078 > #define DDRSS_PI_166_DATA 0x00141414 > -#define DDRSS_PI_167_DATA 0x00000036 > -#define DDRSS_PI_168_DATA 0x00000036 > -#define DDRSS_PI_169_DATA 0x00040036 > +#define DDRSS_PI_167_DATA 0x00000033 > +#define DDRSS_PI_168_DATA 0x00000033 > +#define DDRSS_PI_169_DATA 0x00040033 > #define DDRSS_PI_170_DATA 0x04000400 > #define DDRSS_PI_171_DATA 0xC8000009 > -#define DDRSS_PI_172_DATA 0x0000091C > -#define DDRSS_PI_173_DATA 0x00091CC8 > -#define DDRSS_PI_174_DATA 0x001CC800 > +#define DDRSS_PI_172_DATA 0x00000916 > +#define DDRSS_PI_173_DATA 0x000916C8 > +#define DDRSS_PI_174_DATA 0x0016C800 > #define DDRSS_PI_175_DATA 0x00000118 > #define DDRSS_PI_176_DATA 0x00001860 > #define DDRSS_PI_177_DATA 0x00000118 > @@ -626,14 +628,14 @@ > #define DDRSS_PI_184_DATA 0x01080108 > #define DDRSS_PI_185_DATA 0x00000108 > #define DDRSS_PI_186_DATA 0x00000000 > -#define DDRSS_PI_187_DATA 0x05000000 > -#define DDRSS_PI_188_DATA 0x01010505 > +#define DDRSS_PI_187_DATA 0x02000000 > +#define DDRSS_PI_188_DATA 0x01010202 > #define DDRSS_PI_189_DATA 0x01010101 > #define DDRSS_PI_190_DATA 0x00181818 > #define DDRSS_PI_191_DATA 0x00000000 > #define DDRSS_PI_192_DATA 0x00000000 > -#define DDRSS_PI_193_DATA 0x09000000 > -#define DDRSS_PI_194_DATA 0x06060909 > +#define DDRSS_PI_193_DATA 0x06000000 > +#define DDRSS_PI_194_DATA 0x06060606 > #define DDRSS_PI_195_DATA 0x03030306 > #define DDRSS_PI_196_DATA 0x00000000 > #define DDRSS_PI_197_DATA 0x00000000 > @@ -661,15 +663,15 @@ > #define DDRSS_PI_219_DATA 0x001600C8 > #define DDRSS_PI_220_DATA 0x010100C8 > #define DDRSS_PI_221_DATA 0x00001701 > -#define DDRSS_PI_222_DATA 0x1F0F0053 > -#define DDRSS_PI_223_DATA 0x05000001 > -#define DDRSS_PI_224_DATA 0x00170A09 > -#define DDRSS_PI_225_DATA 0x1F0F0053 > -#define DDRSS_PI_226_DATA 0x05000001 > -#define DDRSS_PI_227_DATA 0x00170A09 > -#define DDRSS_PI_228_DATA 0x1F0F0053 > -#define DDRSS_PI_229_DATA 0x05000001 > -#define DDRSS_PI_230_DATA 0x00010A09 > +#define DDRSS_PI_222_DATA 0x1F0F0050 > +#define DDRSS_PI_223_DATA 0x02000001 > +#define DDRSS_PI_224_DATA 0x00170A06 > +#define DDRSS_PI_225_DATA 0x1F0F0050 > +#define DDRSS_PI_226_DATA 0x02000001 > +#define DDRSS_PI_227_DATA 0x00170A06 > +#define DDRSS_PI_228_DATA 0x1F0F0050 > +#define DDRSS_PI_229_DATA 0x02000001 > +#define DDRSS_PI_230_DATA 0x00010A06 > #define DDRSS_PI_231_DATA 0x0C0B0700 > #define DDRSS_PI_232_DATA 0x000D0605 > #define DDRSS_PI_233_DATA 0x0000C570 > @@ -736,7 +738,7 @@ > #define DDRSS_PI_294_DATA 0x01000000 > #define DDRSS_PI_295_DATA 0x00020201 > #define DDRSS_PI_296_DATA 0x00000000 > -#define DDRSS_PI_297_DATA 0x00000424 > +#define DDRSS_PI_297_DATA 0x00000410 > #define DDRSS_PI_298_DATA 0x00000301 > #define DDRSS_PI_299_DATA 0x00000000 > #define DDRSS_PI_300_DATA 0x00000000 > @@ -744,7 +746,7 @@ > #define DDRSS_PI_302_DATA 0x00001400 > #define DDRSS_PI_303_DATA 0x00000493 > #define DDRSS_PI_304_DATA 0x00000000 > -#define DDRSS_PI_305_DATA 0x00000424 > +#define DDRSS_PI_305_DATA 0x00000410 > #define DDRSS_PI_306_DATA 0x00000301 > #define DDRSS_PI_307_DATA 0x00000000 > #define DDRSS_PI_308_DATA 0x00000000 > @@ -752,7 +754,7 @@ > #define DDRSS_PI_310_DATA 0x00001400 > #define DDRSS_PI_311_DATA 0x00000493 > #define DDRSS_PI_312_DATA 0x00000000 > -#define DDRSS_PI_313_DATA 0x00000424 > +#define DDRSS_PI_313_DATA 0x00000410 > #define DDRSS_PI_314_DATA 0x00000301 > #define DDRSS_PI_315_DATA 0x00000000 > #define DDRSS_PI_316_DATA 0x00000000 > @@ -760,7 +762,7 @@ > #define DDRSS_PI_318_DATA 0x00001400 > #define DDRSS_PI_319_DATA 0x00000493 > #define DDRSS_PI_320_DATA 0x00000000 > -#define DDRSS_PI_321_DATA 0x00000424 > +#define DDRSS_PI_321_DATA 0x00000410 > #define DDRSS_PI_322_DATA 0x00000301 > #define DDRSS_PI_323_DATA 0x00000000 > #define DDRSS_PI_324_DATA 0x00000000 > @@ -768,7 +770,7 @@ > #define DDRSS_PI_326_DATA 0x00001400 > #define DDRSS_PI_327_DATA 0x00000493 > #define DDRSS_PI_328_DATA 0x00000000 > -#define DDRSS_PI_329_DATA 0x00000424 > +#define DDRSS_PI_329_DATA 0x00000410 > #define DDRSS_PI_330_DATA 0x00000301 > #define DDRSS_PI_331_DATA 0x00000000 > #define DDRSS_PI_332_DATA 0x00000000 > @@ -776,7 +778,7 @@ > #define DDRSS_PI_334_DATA 0x00001400 > #define DDRSS_PI_335_DATA 0x00000493 > #define DDRSS_PI_336_DATA 0x00000000 > -#define DDRSS_PI_337_DATA 0x00000424 > +#define DDRSS_PI_337_DATA 0x00000410 > #define DDRSS_PI_338_DATA 0x00000301 > #define DDRSS_PI_339_DATA 0x00000000 > #define DDRSS_PI_340_DATA 0x00000000 > diff --git a/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi b/arch/arm/dts/= k3-am62-pocketbeagle2-u-boot.dtsi > similarity index 53% > copy from arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi > copy to arch/arm/dts/k3-am62-pocketbeagle2-u-boot.dtsi > index 0e810e7f492..9f97e0b34c2 100644 > --- a/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi > +++ b/arch/arm/dts/k3-am62-pocketbeagle2-u-boot.dtsi > @@ -1,20 +1,75 @@ > // SPDX-License-Identifier: GPL-2.0 > /* > - * Common AM67A BeagleY-AI dts file for SPLs > + * AM625 PocketBeagle 2 dts file for SPLs > + * https://www.beagleboard.org/boards/pocketbeagle-2 > * > - * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.co= m/ > - * Copyright (C) 2024 Robert Nelson, BeagleBoard.org Foundation > + * Copyright (C) 2024-2025 Texas Instruments Incorporated - https://www.= ti.com/ > + * Copyright (C) 2024-2025 Robert Nelson, BeagleBoard.org Foundation > */ > =20 > #include "k3-binman.dtsi" > =20 > / { > - chosen { > - stdout-path =3D "serial2:115200n8"; > - tick-timer =3D &main_timer0; > + /* Keep the LEDs on by default to indicate life */ > + leds { > + led-1 { > + label =3D "led-1"; > + default-state =3D "on"; > + }; > + > + led-2 { > + label =3D "led-2"; > + default-state =3D "on"; > + }; > + > + led-3 { > + label =3D "led-3"; > + default-state =3D "on"; > + }; > + > + led-4 { > + label =3D "led-4"; > + default-state =3D "on"; > + }; > }; > }; > =20 > +&main_mmc1_pins_default { > + /* Force to use SDCD card detect pin */ > + pinctrl-single,pins =3D < > + AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ > + AM62X_IOPAD(0x0234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ > + AM62X_IOPAD(0x0230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */ > + AM62X_IOPAD(0x022c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */ > + AM62X_IOPAD(0x0228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */ > + AM62X_IOPAD(0x0224, PIN_INPUT, 0) /* (D22/C19) MMC1_DAT3 */ > + AM62X_IOPAD(0x0240, PIN_INPUT, 0) /* (D17/C15) MMC1_SDCD */ > + >; > +}; > + > +&usbss0 { > + bootph-all; > +}; > + > +&usb0 { > + dr_mode =3D "peripheral"; > + bootph-all; > +}; > + > +&main_bcdma { > + reg =3D <0x00 0x485c0100 0x00 0x100>, > + <0x00 0x4c000000 0x00 0x20000>, > + <0x00 0x4a820000 0x00 0x20000>, > + <0x00 0x4aa40000 0x00 0x20000>, > + <0x00 0x4bc00000 0x00 0x100000>, > + <0x00 0x48600000 0x00 0x8000>, > + <0x00 0x484a4000 0x00 0x2000>, > + <0x00 0x484c2000 0x00 0x2000>; > + reg-names =3D "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", > + "cfg", "tchan", "rchan"; > + bootph-all; > +}; > + > &main_pktdma { > reg =3D <0x00 0x485c0000 0x00 0x100>, > <0x00 0x4a800000 0x00 0x20000>, > @@ -24,44 +79,32 @@ > <0x00 0x484a0000 0x00 0x4000>, > <0x00 0x484c0000 0x00 0x2000>, > <0x00 0x48430000 0x00 0x4000>; > - reg-names =3D "gcfg", "rchanrt", "tchanrt", "ringrt", > - "cfg", "tchan", "rchan", "rflow"; > -}; > - > -&dmsc { > - bootph-pre-ram; > - k3_sysreset: sysreset-controller { > - compatible =3D "ti,sci-sysreset"; > - bootph-pre-ram; > - }; > -}; > - > -&usbss0 { > - bootph-pre-ram; > + reg-names =3D "gcfg", "rchanrt", "tchanrt", "ringrt", "cfg", > + "tchan", "rchan", "rflow"; > + bootph-all; > }; > =20 > -&usb0 { > - dr_mode =3D "peripheral"; > - bootph-pre-ram; > +&cpsw3g { > + status =3D "disabled"; > }; > =20 > -&usbss1 { > +&cpsw_port1 { > status =3D "disabled"; > }; > =20 > -&usb1 { > +&cpsw_port2 { > status =3D "disabled"; > }; > =20 > -&main_gpio1 { > +&main_uart6_pins_default { > bootph-all; > }; > =20 > -#if IS_ENABLED(CONFIG_TARGET_J722S_R5_BEAGLEY_AI) > +#if IS_ENABLED(CONFIG_TARGET_AM62X_R5_POCKETBEAGLE2) > =20 > &binman { > - tiboot3-j722s-hs-evm.bin { > - filename =3D "tiboot3-j722s-hs-evm.bin"; > + tiboot3-am62x-hs-evm.bin { > + filename =3D "tiboot3-am62x-hs-evm.bin"; > ti-secure-rom { > content =3D <&u_boot_spl>, <&ti_fs_enc>, <&combined_tifs_cfg>, > <&combined_dm_cfg>, <&sysfw_inner_cert>; > @@ -78,7 +121,7 @@ > load =3D ; > load-sysfw =3D <0x40000>; > load-sysfw-data =3D <0x67000>; > - load-dm-data =3D <0x43c7a800>; > + load-dm-data =3D <0x43c3a800>; > }; > =20 > u_boot_spl: u-boot-spl { > @@ -86,8 +129,9 @@ > }; > =20 > ti_fs_enc: ti-fs-enc.bin { > - filename =3D "ti-sysfw/ti-fs-firmware-j722s-hs-enc.bin"; > + filename =3D "ti-sysfw/ti-fs-firmware-am62x-hs-enc.bin"; > type =3D "blob-ext"; > + optional; > }; > =20 > combined_tifs_cfg: combined-tifs-cfg.bin { > @@ -96,8 +140,9 @@ > }; > =20 > sysfw_inner_cert: sysfw-inner-cert { > - filename =3D "ti-sysfw/ti-fs-firmware-j722s-hs-cert.bin"; > + filename =3D "ti-sysfw/ti-fs-firmware-am62x-hs-cert.bin"; > type =3D "blob-ext"; > + optional; > }; > =20 > combined_dm_cfg: combined-dm-cfg.bin { > @@ -108,8 +153,8 @@ > }; > =20 > &binman { > - tiboot3-j722s-hs-fs-evm.bin { > - filename =3D "tiboot3-j722s-hs-fs-evm.bin"; > + tiboot3-am62x-hs-fs-evm.bin { > + filename =3D "tiboot3-am62x-hs-fs-evm.bin"; > symlink =3D "tiboot3.bin"; > =20 > ti-secure-rom { > @@ -128,7 +173,7 @@ > load =3D ; > load-sysfw =3D <0x40000>; > load-sysfw-data =3D <0x67000>; > - load-dm-data =3D <0x43c7a800>; > + load-dm-data =3D <0x43c3a800>; > }; > =20 > u_boot_spl_fs: u-boot-spl { > @@ -136,8 +181,9 @@ > }; > =20 > ti_fs_enc_fs: ti-fs-enc.bin { > - filename =3D "ti-sysfw/ti-fs-firmware-j722s-hs-fs-enc.bin"; > + filename =3D "ti-sysfw/ti-fs-firmware-am62x-hs-fs-enc.bin"; > type =3D "blob-ext"; > + optional; > }; > =20 > combined_tifs_cfg_fs: combined-tifs-cfg.bin { > @@ -146,8 +192,9 @@ > }; > =20 > sysfw_inner_cert_fs: sysfw-inner-cert { > - filename =3D "ti-sysfw/ti-fs-firmware-j722s-hs-fs-cert.bin"; > + filename =3D "ti-sysfw/ti-fs-firmware-am62x-hs-fs-cert.bin"; > type =3D "blob-ext"; > + optional; > }; > =20 > combined_dm_cfg_fs: combined-dm-cfg.bin { > @@ -156,12 +203,12 @@ > }; > }; > }; > -#endif /* CONFIG_TARGET_J722S_R5_BEAGLEY_AI */ > +#endif /* CONFIG_TARGET_AM62X_R5_POCKETBEAGLE2 */ > =20 > -#if IS_ENABLED(CONFIG_TARGET_J722S_A53_BEAGLEY_AI) > +#if IS_ENABLED(CONFIG_TARGET_AM62X_A53_POCKETBEAGLE2) > =20 > -#define SPL_BEAGLEY_AI_DTB "spl/dts/ti/k3-am67a-beagley-ai.dtb" > -#define BEAGLEY_AI_DTB "u-boot.dtb" > +#define SPL_AM62X_POCKETBEAGLE2_DTB "spl/dts/ti/k3-am62-pocketbeagle2.dt= b" > +#define AM62X_POCKETBEAGLE2_DTB "u-boot.dtb" > =20 > &binman { > ti-spl { > @@ -176,23 +223,24 @@ > }; > =20 > dm: ti-dm { > - filename =3D "ti-dm/j722s/ipc_echo_testb_mcu1_0_release_strip.xer5= f"; > + filename =3D "ti-dm/am62xx/ipc_echo_testb_mcu1_0_release_strip.xer= 5f"; > + optional; > }; > }; > =20 > fdt-0 { > - description =3D "k3-am67a-beagley-ai"; > + description =3D "k3-am62-pocketbeagle2"; > type =3D "flat_dt"; > arch =3D "arm"; > compression =3D "none"; > =20 > ti-secure { > - content =3D <&spl_beagley_ai_dtb>; > + content =3D <&spl_pocketbeagle2_dtb>; > keyfile =3D "custMpk.pem"; > }; > =20 > - spl_beagley_ai_dtb: blob-ext { > - filename =3D "spl/dts/ti/k3-am67a-beagley-ai.dtb"; > + spl_pocketbeagle2_dtb: blob-ext { > + filename =3D "spl/dts/ti/k3-am62-pocketbeagle2.dtb"; > }; > =20 > }; > @@ -203,7 +251,7 @@ > default =3D "conf-0"; > =20 > conf-0 { > - description =3D "k3-am67a-beagley-ai"; > + description =3D "k3-am62-pocketbeagle2"; > firmware =3D "atf"; > loadables =3D "tee", "dm", "spl"; > fdt =3D "fdt-0"; > @@ -220,21 +268,21 @@ > fit { > images { > uboot { > - description =3D "U-Boot for BeagleY-AI"; > + description =3D "U-Boot for PocketBeagle 2"; > }; > =20 > fdt-0 { > - description =3D "k3-am67a-beagley-ai"; > + description =3D "k3-am62-pocketbeagle2"; > type =3D "flat_dt"; > arch =3D "arm"; > compression =3D "none"; > =20 > ti-secure { > - content =3D <&beagley_ai_dtb>; > + content =3D <&pocketbeagle2_dtb>; > keyfile =3D "custMpk.pem"; > }; > =20 > - beagley_ai_dtb: blob-ext { > + pocketbeagle2_dtb: blob-ext { > filename =3D "u-boot.dtb"; > }; > =20 > @@ -248,7 +296,7 @@ > default =3D "conf-0"; > =20 > conf-0 { > - description =3D "k3-k3-am67a-beagley-ai"; > + description =3D "k3-am62-pocketbeagle2"; > firmware =3D "uboot"; > loadables =3D "uboot"; > fdt =3D "fdt-0"; > @@ -258,4 +306,4 @@ > }; > }; > }; > -#endif /* CONFIG_TARGET_J722S_A53_BEAGLEY_AI */ > +#endif /* CONFIG_TARGET_AM62X_A53_POCKETBEAGLE2 */ > diff --git a/arch/arm/dts/k3-am62-r5-pocketbeagle2.dts b/arch/arm/dts/k3-= am62-r5-pocketbeagle2.dts > new file mode 100644 > index 00000000000..4489a559287 > --- /dev/null > +++ b/arch/arm/dts/k3-am62-r5-pocketbeagle2.dts > @@ -0,0 +1,35 @@ > +// SPDX-License-Identifier: GPL-2.0-only OR MIT > +/* > + * AM625 PocketBeagle 2 dts file for R5 SPL > + * https://www.beagleboard.org/boards/pocketbeagle-2 > + * > + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.= ti.com/ > + * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation Nit: 2022-2026 and same for the pocketbeagle2.c file below. > + */ > + > +#include "k3-am62-pocketbeagle2.dts" > +#include "k3-am62-pocketbeagle2-ddr4-1600MTs.dtsi" > +#include "k3-am62-ddr.dtsi" > + > +#include "k3-am62-pocketbeagle2-u-boot.dtsi" > +#include "k3-am625-r5.dtsi" > + > +/ { > + aliases { > + serial1 =3D &main_uart1; > + serial2 =3D &main_uart6; > + serial3 =3D &main_uart3; > + serial4 =3D &main_uart4; > + serial5 =3D &main_uart5; > + serial6 =3D &main_uart2; > + serial7 =3D &main_uart0; > + }; > +}; > + > +&main_pktdma { > + ti,sci =3D <&dm_tifs>; > +}; > + > +&main_bcdma { > + ti,sci =3D <&dm_tifs>; > +}; > diff --git a/arch/arm/mach-k3/am62x/Kconfig b/arch/arm/mach-k3/am62x/Kcon= fig > index f7ad52db7d8..87470248aa1 100644 > --- a/arch/arm/mach-k3/am62x/Kconfig > +++ b/arch/arm/mach-k3/am62x/Kconfig > @@ -69,6 +69,7 @@ config TARGET_VERDIN_AM62_R5 > endchoice > =20 > source "board/beagle/beagleplay/Kconfig" > +source "board/beagle/pocketbeagle2/Kconfig" > source "board/phytec/phycore_am62x/Kconfig" > source "board/ti/am62x/Kconfig" > source "board/toradex/verdin-am62/Kconfig" > diff --git a/board/beagle/pocketbeagle2/Kconfig b/board/beagle/pocketbeag= le2/Kconfig > new file mode 100644 > index 00000000000..e957b8e8377 > --- /dev/null > +++ b/board/beagle/pocketbeagle2/Kconfig > @@ -0,0 +1,60 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# > +# Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com= / > +# > + > +choice > + prompt "BeagleBoard.org AM62X based PocketBeagle 2 board" > + optional > + > +config TARGET_AM62X_A53_POCKETBEAGLE2 > + bool "BeagleBoard.org AM62X PocketBeagle 2 running on A53" > + select ARM64 > + select BINMAN > + select OF_SYSTEM_SETUP > + > +config TARGET_AM62X_R5_POCKETBEAGLE2 > + bool "BeagleBoard.org AM62X PocketBeagle 2 running on R5" > + select CPU_V7R > + select SYS_THUMB_BUILD > + select K3_LOAD_SYSFW > + select RAM > + select SPL_RAM > + select K3_DDRSS > + select BINMAN > + imply SYS_K3_SPL_ATF > + > +endchoice > + > +if TARGET_AM62X_A53_POCKETBEAGLE2 > + > +config SYS_BOARD > + default "pocketbeagle2" > + > +config SYS_VENDOR > + default "beagle" > + > +config SYS_CONFIG_NAME > + default "pocketbeagle2" > + > +source "board/ti/common/Kconfig" > + > +endif > + > +if TARGET_AM62X_R5_POCKETBEAGLE2 > + > +config SYS_BOARD > + default "pocketbeagle2" > + > +config SYS_VENDOR > + default "beagle" > + > +config SYS_CONFIG_NAME > + default "pocketbeagle2" > + > +config SPL_LDSCRIPT > + default "arch/arm/mach-omap2/u-boot-spl.lds" > + > +source "board/ti/common/Kconfig" > + > +endif > diff --git a/board/beagle/pocketbeagle2/MAINTAINERS b/board/beagle/pocket= beagle2/MAINTAINERS > new file mode 100644 > index 00000000000..79bdd59af7e > --- /dev/null > +++ b/board/beagle/pocketbeagle2/MAINTAINERS > @@ -0,0 +1,10 @@ > +POCKETBEAGLE2 BOARD > +M: Nishanth Menon > +M: Robert Nelson > +M: Tom Rini > +S: Maintained > +N: pocketbeagle2 > +F: board/beagle/pocketbeagle2/ > +F: include/configs/pocketbeagle2.h > +F: configs/am62_pocketbeagle2_a53_defconfig > +F: configs/am62_pocketbeagle2_r5_defconfig > diff --git a/board/beagle/pocketbeagle2/Makefile b/board/beagle/pocketbea= gle2/Makefile > new file mode 100644 > index 00000000000..3d42c160716 > --- /dev/null > +++ b/board/beagle/pocketbeagle2/Makefile > @@ -0,0 +1,9 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +# > +# Makefile for AM625 PocketBeagle 2 > +# https://www.beagleboard.org/boards/pocketbeagle-2 > +# > +# Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com= / > +# > + > +obj-y +=3D pocketbeagle2.o > diff --git a/board/beagle/beagleplay/board-cfg.yaml b/board/beagle/pocket= beagle2/board-cfg.yaml > similarity index 100% > copy from board/beagle/beagleplay/board-cfg.yaml > copy to board/beagle/pocketbeagle2/board-cfg.yaml > diff --git a/board/beagle/beagleplay/pm-cfg.yaml b/board/beagle/pocketbea= gle2/pm-cfg.yaml > similarity index 100% > copy from board/beagle/beagleplay/pm-cfg.yaml > copy to board/beagle/pocketbeagle2/pm-cfg.yaml > diff --git a/board/beagle/pocketbeagle2/pocketbeagle2.c b/board/beagle/po= cketbeagle2/pocketbeagle2.c > new file mode 100644 > index 00000000000..b6768caa34b > --- /dev/null > +++ b/board/beagle/pocketbeagle2/pocketbeagle2.c > @@ -0,0 +1,39 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Board specific initialization for AM625 PocketBeagle 2 > + * https://www.beagleboard.org/boards/pocketbeagle-2 > + * > + * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.co= m/ > + * Copyright (C) 2025 Robert Nelson, BeagleBoard.org Foundation > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +int dram_init(void) > +{ > + return fdtdec_setup_mem_size_base(); > +} > + > +int dram_init_banksize(void) > +{ > + return fdtdec_setup_memory_banksize(); > +} > + > +#if IS_ENABLED(CONFIG_BOARD_LATE_INIT) > +int board_late_init(void) > +{ > + char fdtfile[50]; > + > + snprintf(fdtfile, sizeof(fdtfile), "%s.dtb", CONFIG_DEFAULT_DEVICE_TREE= ); > + > + env_set("fdtfile", fdtfile); > + > + return 0; > +} > +#endif /* CONFIG_BOARD_LATE_INIT */ > diff --git a/board/ti/am62x/am62x.env b/board/beagle/pocketbeagle2/pocket= beagle2.env > similarity index 59% > copy from board/ti/am62x/am62x.env > copy to board/beagle/pocketbeagle2/pocketbeagle2.env > index 60b5fd5e6ca..a9341c592d1 100644 > --- a/board/ti/am62x/am62x.env > +++ b/board/beagle/pocketbeagle2/pocketbeagle2.env > @@ -10,23 +10,20 @@ rproc_fw_binaries=3D 0 /lib/firmware/am62-mcu-m4f0_0-= fw > =20 > name_kern=3DImage > console=3DttyS2,115200n8 > -args_all=3Dsetenv optargs ${optargs} earlycon=3Dns16550a,mmio32,0x028000= 00 > - ${mtdparts} > +args_all=3Dsetenv optargs ${optargs} earlycon=3Dns16550a,mmio32,0x028600= 00 > run_kern=3Dbooti ${loadaddr} ${rd_spec} ${fdtaddr} > +set_led_state_fail_load=3D led led-1 off; led led-2 on; > + led led-3 off; led led-4 on > +set_led_state_start_load=3Dled led-1 on; led led-2 off; > + led led-3 on; led led-4 off > =20 > -boot_targets=3Dmmc1 mmc0 usb pxe dhcp > +boot_targets=3Dmmc1 mmc0 > boot=3Dmmc > mmcdev=3D1 > bootpart=3D1:2 > bootdir=3D/boot > +bootmeths=3Dscript extlinux efi pxe > rd_spec=3D- > =20 > -splashfile=3Dti_logo_414x97_32bpp.bmp.gz > -splashimage=3D0x80200000 > -splashpos=3Dm,m > -splashsource=3Dsf > - > -#if CONFIG_BOOTMETH_ANDROID > -#include > -adtb_idx=3D0 > -#endif > \ No newline at end of file > +kernel_comp_addr_r=3D0x85000000 > +kernel_comp_size=3D0x20000000 > diff --git a/board/phytec/phycore_am62x/rm-cfg.yaml b/board/beagle/pocket= beagle2/rm-cfg.yaml > similarity index 100% > copy from board/phytec/phycore_am62x/rm-cfg.yaml > copy to board/beagle/pocketbeagle2/rm-cfg.yaml > diff --git a/board/beagle/beagleplay/sec-cfg.yaml b/board/beagle/pocketbe= agle2/sec-cfg.yaml > similarity index 100% > copy from board/beagle/beagleplay/sec-cfg.yaml > copy to board/beagle/pocketbeagle2/sec-cfg.yaml > diff --git a/configs/am62x_beagleplay_a53_defconfig b/configs/am62_pocket= beagle2_a53_defconfig > similarity index 91% > copy from configs/am62x_beagleplay_a53_defconfig > copy to configs/am62_pocketbeagle2_a53_defconfig > index c9bc7cd8d39..0f84a7c252d 100644 > --- a/configs/am62x_beagleplay_a53_defconfig > +++ b/configs/am62_pocketbeagle2_a53_defconfig > @@ -6,11 +6,11 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=3Dy > CONFIG_SPL_LIBGENERIC_SUPPORT=3Dy > CONFIG_NR_DRAM_BANKS=3D1 > CONFIG_SOC_K3_AM625=3Dy > -CONFIG_TARGET_AM625_A53_BEAGLEPLAY=3Dy > +CONFIG_TARGET_AM62X_A53_POCKETBEAGLE2=3Dy > CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=3Dy > CONFIG_CUSTOM_SYS_INIT_SP_ADDR=3D0x80b80000 > CONFIG_DM_GPIO=3Dy > -CONFIG_DEFAULT_DEVICE_TREE=3D"ti/k3-am625-beagleplay" > +CONFIG_DEFAULT_DEVICE_TREE=3D"ti/k3-am62-pocketbeagle2" > CONFIG_OF_LIBFDT_OVERLAY=3Dy > CONFIG_DM_RESET=3Dy > CONFIG_SPL_MMC=3Dy > @@ -44,8 +44,6 @@ CONFIG_SPL_I2C=3Dy > CONFIG_SPL_DM_MAILBOX=3Dy > CONFIG_SPL_POWER_DOMAIN=3Dy > CONFIG_SPL_YMODEM_SUPPORT=3Dy > -CONFIG_CMD_BOOTEFI_SELFTEST=3Dy > -CONFIG_CMD_NVEDIT_EFI=3Dy > CONFIG_CMD_GPIO=3Dy > CONFIG_CMD_GPIO_READ=3Dy > CONFIG_CMD_I2C=3Dy > @@ -53,6 +51,7 @@ CONFIG_CMD_MMC=3Dy > CONFIG_CMD_EFIDEBUG=3Dy > CONFIG_CMD_PMIC=3Dy > CONFIG_CMD_REGULATOR=3Dy > +CONFIG_CMD_CACHE=3Dy > CONFIG_OF_CONTROL=3Dy > CONFIG_SPL_OF_CONTROL=3Dy > CONFIG_OF_UPSTREAM=3Dy > @@ -90,10 +89,6 @@ CONFIG_MMC_SDHCI=3Dy > CONFIG_MMC_SDHCI_ADMA=3Dy > CONFIG_SPL_MMC_SDHCI_ADMA=3Dy > CONFIG_MMC_SDHCI_AM654=3Dy > -CONFIG_PHY_REALTEK=3Dy > -CONFIG_PHY_TI=3Dy > -CONFIG_DM_ETH_PHY=3Dy > -CONFIG_TI_AM65_CPSW_NUSS=3Dy > CONFIG_PHY=3Dy > CONFIG_PINCTRL=3Dy > CONFIG_SPL_PINCTRL=3Dy > @@ -120,7 +115,8 @@ CONFIG_SYSRESET_TI_SCI=3Dy > CONFIG_EXT4_WRITE=3Dy > CONFIG_FS_FAT_MAX_CLUSTSIZE=3D16384 > CONFIG_LZO=3Dy > -CONFIG_EFI_SET_TIME=3Dy > +CONFIG_SYS_MEM_TOP_HIDE=3D0x4000000 Any reason why we are using TOP_HIDE here instead of just moving OPTEE lower in DDR like we do on the 512MiB AM6254atl EVM? > + > +CONFIG_BOOTDELAY=3D0 > =20 > -#include > #include > diff --git a/configs/am62x_beagleplay_r5_defconfig b/configs/am62_pocketb= eagle2_r5_defconfig > similarity index 93% > copy from configs/am62x_beagleplay_r5_defconfig > copy to configs/am62_pocketbeagle2_r5_defconfig > index aca8a7fc65c..e863204cfef 100644 > --- a/configs/am62x_beagleplay_r5_defconfig > +++ b/configs/am62_pocketbeagle2_r5_defconfig > @@ -6,13 +6,13 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=3Dy > CONFIG_SPL_LIBGENERIC_SUPPORT=3Dy > CONFIG_NR_DRAM_BANKS=3D1 > CONFIG_SOC_K3_AM625=3Dy > -CONFIG_TARGET_AM625_R5_BEAGLEPLAY=3Dy > +CONFIG_TARGET_AM62X_R5_POCKETBEAGLE2=3Dy > CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=3Dy > CONFIG_CUSTOM_SYS_INIT_SP_ADDR=3D0x43c3a7f0 > CONFIG_ENV_SIZE=3D0x20000 > CONFIG_DM_GPIO=3Dy > CONFIG_SPL_DM_SPI=3Dy > -CONFIG_DEFAULT_DEVICE_TREE=3D"k3-am625-r5-beagleplay" > +CONFIG_DEFAULT_DEVICE_TREE=3D"k3-am62-r5-pocketbeagle2" > CONFIG_DM_RESET=3Dy > CONFIG_SPL_SYS_MALLOC_F_LEN=3D0x7000 > CONFIG_SPL_MMC=3Dy > @@ -20,6 +20,7 @@ CONFIG_SPL_SERIAL=3Dy > CONFIG_SPL_DRIVERS_MISC=3Dy > CONFIG_SPL_STACK_R_ADDR=3D0x82000000 > CONFIG_SPL_HAS_BSS_LINKER_SECTION=3Dy > +CONFIG_SPL_TEXT_BASE=3D0x43c00000 Nit: 0x43c00000 should be the default for any R5 ARCH_K3 build anyways > CONFIG_SPL_BSS_START_ADDR=3D0x43c3b000 > CONFIG_SPL_BSS_MAX_SIZE=3D0x3000 > CONFIG_SPL_STACK_R=3Dy > @@ -35,7 +36,6 @@ CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=3Dy > CONFIG_SPL_MAX_SIZE=3D0x3B000 > CONFIG_SPL_PAD_TO=3D0x0 > CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=3Dy > -CONFIG_SPL_BOARD_INIT=3Dy > CONFIG_SPL_SYS_MALLOC_SIMPLE=3Dy > CONFIG_SPL_SEPARATE_BSS=3Dy > CONFIG_SPL_SYS_MALLOC=3Dy > @@ -100,3 +100,4 @@ CONFIG_SPL_TIMER=3Dy > CONFIG_OMAP_TIMER=3Dy > CONFIG_LIB_RATIONAL=3Dy > CONFIG_SPL_LIB_RATIONAL=3Dy > +CONFIG_SYS_MEM_TOP_HIDE=3D0x4000000 Ditto > diff --git a/doc/board/beagle/am62_pocketbeagle2.rst b/doc/board/beagle/a= m62_pocketbeagle2.rst > new file mode 100644 > index 00000000000..2f2aa621451 > --- /dev/null > +++ b/doc/board/beagle/am62_pocketbeagle2.rst > @@ -0,0 +1,277 @@ > +.. SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +.. sectionauthor:: Randolph Sapp > + > +AM62 Beagleboard.org PocketBeagle 2 > +=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > + > +Introduction: > +------------- > + > +BeagleBoard.org PocketBeagle 2 is an easy to use, affordable open source > +hardware single board computer based on the Texas Instruments AM625 > +SoC. > + > +Further information can be found at: > + > +* Product Page: https://www.beagleboard.org/boards/pocketbeagle-2 > +* Hardware documentation: https://openbeagle.org/pocketbeagle/pocketbeag= le-2 > + > +Boot Flow: > +---------- > +Below is the pictorial representation of boot flow: > + > +.. image:: ../ti/img/boot_diagram_am62.svg > + :alt: Boot flow diagram > + > +On this platform, 'TI Foundational Security' (TIFS) functions as the sec= urity > +enclave master while 'Device Manager' (DM), also known as the 'TISCI ser= ver' in > +"TI terminology", offers all the essential services. The A53 or M4F (Aux= core) > +sends requests to TIFS/DM to accomplish these services, as illustrated i= n the > +diagram above. > + > +Sources: > +-------- > +.. include:: ../ti/k3.rst > + :start-after: .. k3_rst_include_start_boot_sources > + :end-before: .. k3_rst_include_end_boot_sources > + > +.. include:: ../ti/k3.rst > + :start-after: .. k3_rst_include_start_boot_firmwares > + :end-before: .. k3_rst_include_end_tifsstub > + > +Build procedure: > +---------------- > + > +#. Setup the environment variables: > + > + .. include:: ../ti/k3.rst > + :start-after: .. k3_rst_include_start_common_env_vars_desc > + :end-before: .. k3_rst_include_end_common_env_vars_desc > + > + .. include:: ../ti/k3.rst > + :start-after: .. k3_rst_include_start_board_env_vars_desc > + :end-before: .. k3_rst_include_end_board_env_vars_desc > + > +#. Set the variables corresponding to this platform: > + > + .. include:: ../ti/k3.rst > + :start-after: .. k3_rst_include_start_common_env_vars_defn > + :end-before: .. k3_rst_include_end_common_env_vars_defn > + > + .. prompt:: bash $ > + > + export UBOOT_CFG_CORTEXR=3Dam62_pocketbeagle2_r5_defconfig > + export UBOOT_CFG_CORTEXA=3Dam62_pocketbeagle2_a53_defconfig > + export TFA_BOARD=3Dlite > + export OPTEE_PLATFORM=3Dk3-am62x > + > + .. include:: ../ti/am62x_sk.rst > + :start-after: .. am62x_evm_rst_include_start_build_steps > + :end-before: .. am62x_evm_rst_include_end_build_steps > + > +Target Images > +------------- > +Copy these images to an SD card and boot: > + > + * :file:`tiboot3.bin` from Cortex-R5 build. > + * :file:`tispl.bin` and :file:`u-boot.img` from Cortex-A build > + > +Image formats > +------------- > + > +- :file:`tiboot3.bin` > + > + .. image:: ../ti/img/multi_cert_tiboot3.bin.svg > + :alt: tiboot3.bin image format > + > +- :file:`tispl.bin` > + > + .. image:: ../ti/img/tifsstub_dm_tispl.bin.svg > + :alt: tispl.bin image format > + > +Additional hardware for U-Boot development > +------------------------------------------ > + > +* A Serial Console is critical for U-Boot development on the PocketBeagl= e 2. See > + `PocketBeagle 2 serial console documentation`__. > +* uSD is the default, and a SD/MMC reader will be needed. > +* (optionally) JTAG is useful when working with very early stages of boo= t. > + > +.. __: https://docs.beagleboard.org/boards/pocketbeagle-2/03-design-and-= specifications.html#serial-debug-port > + > +Default storage options > +----------------------- > + > +There is only one storage media option for the PocketBeagle 2, by defaul= t: > + > +* SD/MMC card interface > + > +Flash to uSD card > +----------------- > + > +If you choose to hand format your own bootable uSD card, be > +aware that it can be difficult. The following information > +may be helpful, but remember that it is only sometimes > +reliable, and partition options can cause issues. These > +can potentially help: > + > +* https://git.ti.com/cgit/arago-project/tisdk-setup-scripts/tree/create-= sdcard.sh > +* https://elinux.org/Beagleboard:Expanding_File_System_Partition_On_A_mi= croSD > + > +The simplest option is to start with a standard distribution > +image like those in `BeagleBoard.org Distros Page > +`_ and download a disk image for > +PocketBeagle 2. Pick a 16GB+ uSD card to be on the safer side. > + > +With an SD/MMC Card reader and `Balena Etcher > +`_, having a functional setup in minutes is > +a trivial matter, and it works on almost all host operating systems. > + > +Updating U-Boot is a matter of copying the :file:`tiboot3.bin`, > +:file:`tispl.bin` and :file:`u-boot.img` to the "BOOT" partition of the = uSD > +card. Remember to sync and unmount (or Eject - depending on the Operatin= g > +System) the uSD card prior to physically removing from SD card reader. > + > +Also see following section on switch setting used for booting using > +uSD card. > + > +.. note:: > + > + If you are frequently working with uSD cards, you might find the > + following useful: > + > + * `USB-SD-Mux `_ > + * `SD-Wire `_ > + > +LED patterns during boot > +------------------------ > + > +.. list-table:: USR LED status indication > + :widths: 16 16 > + :header-rows: 1 > + > + * - USR LEDs (1234) > + - Indicates > + > + * - 0000 > + - Boot failure or R5 image not started up > + > + * - 1111 > + - A53 SPL/U-boot has started up > + > + * - 1010 > + - OS boot process has been initiated > + > + * - 0101 > + - OS boot process failed and drops to U-Boot shell > + > +.. note:: > + > + In the table above, 0 indicates LED switched off and 1 indicates LED > + switched ON. > + > +.. warning:: > + > + If the "red" power LED is not glowing, the system power supply is not > + functional. Please refer to the `PocketBeagle 2 documentation > + `_ for further > + information. > + > +A53 SPL DDR Memory Layout > +------------------------- > + > +.. include:: ../ti/am62x_sk.rst > + :start-after: .. am62x_evm_rst_include_start_ddr_mem_layout > + :end-before: .. am62x_evm_rst_include_end_ddr_mem_layout > + > +Switch Setting for Boot Mode > +---------------------------- > + > +The boot time option is configured via "USR" button on the board. See th= e > +`PocketBeagle 2 Schematics > +`_ > +and the `PocketBeagle 2 documentation on Boot Modes > +`_ > +for details. > + > +.. list-table:: Boot Modes > + :widths: 16 16 16 > + :header-rows: 1 > + > + * - USR Button Status > + - Primary Boot > + - Secondary Boot > + > + * - Not Pressed > + - uSD > + - USB Device Firmware Upgrade (DFU) mode > + > + * - Pressed > + - uSD > + - UART > + > +To switch boot modes, hold the "USR" button while powering on the device= with a > +USB type C power supply. Release the button when the red power LED light= s up. > + > +DFU based boot > +-------------- > + > +To boot the board over DFU, ensure there is no SD card inserted with a > +bootloader. After power-on the build artifacts needs to be uploaded one = by one > +with a tool like dfu-util. > + > +.. include:: ../ti/am62x_sk.rst > + :start-after: .. am62x_evm_rst_include_start_dfu_boot > + :end-before: .. am62x_evm_rst_include_end_dfu_boot > + > +Debugging U-Boot > +---------------- > + > +See :ref:`Common Debugging environment - OpenOCD `= : for > +detailed setup and debugging information. > + > +.. warning:: > + > + **OpenOCD support since**: v0.12.0 > + > + If the default package version of OpenOCD in your development > + environment's distribution needs to be updated, it might be necessary= to > + build OpenOCD from the source. > + > +.. include:: ../ti/k3.rst > + :start-after: .. k3_rst_include_start_openocd_connect_tag_connect > + :end-before: .. k3_rst_include_end_openocd_connect_tag_connect > + > +.. include:: ../ti/k3.rst > + :start-after: .. k3_rst_include_start_openocd_cfg_external_intro > + :end-before: .. k3_rst_include_end_openocd_cfg_external_intro > + > +For example, with the PocketBeagle 2 (AM62X platform), the > +:file:`openocd_connect.cfg` would look like: > + > +.. code-block:: tcl > + > + # TUMPA example: > + # http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User's_Ma= nual > + source [find interface/ftdi/tumpa.cfg] > + > + transport select jtag > + > + # default JTAG configuration has only SRST and no TRST > + reset_config srst_only srst_push_pull > + > + # delay after SRST goes inactive > + adapter srst delay 20 > + > + if { ![info exists SOC] } { > + # Set the SoC of interest > + set SOC am625 > + } > + > + source [find target/ti_k3.cfg] > + > + ftdi tdo_sample_edge falling > + > + # Speeds for FT2232H are in multiples of 2, and 32MHz is tops > + # max speed we seem to achieve is ~20MHz.. so we pick 16MHz > + adapter speed 16000 > diff --git a/doc/board/beagle/index.rst b/doc/board/beagle/index.rst > index e33d39fc677..8bf099ae7be 100644 > --- a/doc/board/beagle/index.rst > +++ b/doc/board/beagle/index.rst > @@ -10,6 +10,7 @@ ARM based boards > .. toctree:: > :maxdepth: 2 > =20 > + am62_pocketbeagle2 > am62x_beagleplay > am67a_beagley_ai.rst > j721e_beagleboneai64 > diff --git a/dts/upstream/src/arm64/ti/k3-am62-pocketbeagle2.dts b/dts/up= stream/src/arm64/ti/k3-am62-pocketbeagle2.dts > index 7a4cffc27bd..12d33619379 100644 > --- a/dts/upstream/src/arm64/ti/k3-am62-pocketbeagle2.dts > +++ b/dts/upstream/src/arm64/ti/k3-am62-pocketbeagle2.dts > @@ -22,6 +22,7 @@ > serial1 =3D &main_uart1; > serial2 =3D &main_uart6; > serial3 =3D &main_uart0; > + mmc0 =3D &sdhci0; > mmc1 =3D &sdhci1; > usb0 =3D &usb0; > usb1 =3D &usb1; > @@ -232,6 +233,22 @@ > >; > }; > =20 > + main_mmc0_pins_default: main-mmc0-default-pins { > + pinctrl-single,pins =3D < > + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ > + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ > + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ > + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ > + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ > + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ > + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ > + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ > + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ > + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ > + >; > + bootph-all; > + }; > + > main_mmc1_pins_default: main-mmc1-default-pins { > pinctrl-single,pins =3D < > AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ > @@ -280,6 +297,18 @@ > }; > }; > =20 > +&cpsw3g { > + status =3D "disabled"; > +}; > + > +&cpsw_port1 { > + status =3D "disabled"; > +}; > + > +&cpsw_port2 { > + status =3D "disabled"; > +}; > + > &epwm2 { > status =3D "okay"; > pinctrl-names =3D "default"; > @@ -328,6 +357,12 @@ > }; > }; > =20 > +&main_i2c1 { > + clock-frequency =3D <400000>; > + bootph-all; > + status =3D "okay"; > +}; > + > &main_i2c2 { > pinctrl-names =3D "default"; > pinctrl-0 =3D <&main_i2c2_pins_default>; > @@ -356,6 +391,14 @@ > }; > }; > =20 > +&sdhci0 { > + pinctrl-names =3D "default"; > + pinctrl-0 =3D <&main_mmc0_pins_default>; > + disable-wp; > + bootph-all; > + status =3D "okay"; > +}; > + > &sdhci1 { > /* SD/MMC */ > vmmc-supply =3D <&vdd_mmc1>; > diff --git a/include/configs/beagley_ai.h b/include/configs/pocketbeagle2= .h > similarity index 57% > copy from include/configs/beagley_ai.h > copy to include/configs/pocketbeagle2.h > index a7072a094c5..dd6956aa8b9 100644 > --- a/include/configs/beagley_ai.h > +++ b/include/configs/pocketbeagle2.h > @@ -1,14 +1,14 @@ > /* SPDX-License-Identifier: GPL-2.0+ */ > /* > - * Configuration header file for BeagleY-AI > + * Configuration header file for PocketBeagle 2 > * > * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.co= m/ > */ > =20 > -#ifndef __CONFIG_BEAGLEY_AI_H > -#define __CONFIG_BEAGLEY_AI_H > +#ifndef __CONFIG_POCKETBEAGLE2_H > +#define __CONFIG_POCKETBEAGLE2_H > =20 > /* Now for the remaining common defines */ > #include > =20 > -#endif /* __CONFIG_BEAGLEY_AI_H */ > +#endif /* __CONFIG_POCKETBEAGLE2_H */