From: "Ron Cococcia" Subject: Disabling onboard codec Date: Thu, 1 Apr 2004 15:28:38 -0500 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org This might not be entirely alsa devel related, but it doesn't fit alsa user either. I figured I'd ask anyway... In a setup I'm working with, I have a motherboard (815 w/82801BA-ICH2) that has an onboard/primary (00) AC97 codec (AD1885). We've been playing around with adding a CNR card that would have a different/secondary (01) codec on it (CS4299). I had used the gnome-alsamixer to set the volumes, and I see "AD1885/CS4299" in the mixer control. I can play music out either of the outputs if I wanted to, but unfortunately, it's not. The onboard chip is generating (I think) a BIT_CLK signal, and (I think) the CNR is as well (it's wired to an oscillator). I'm worried that both chips generating a BIT_CLK might cause jitter, and could cause audio quality issues. What I'm looking to do is somehow disable the main (AD1885) codec programmatically if possible, so it isn't generating a BIT_CLK signal, and it more or less disappears. I appreciate any ideas you may have. I understand that this isn't entirely the focus of the group, but I know that some of you have worked with this stuff for a while and may know how. TIA, Ron ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click