From: Rick Bronson Date: Sun, 31 Jan 2010 17:49:22 -0800 Subject: [U-Boot] MX51 Eval board Rev 2.5, CPU Rev 3 Ethernet working, sort of Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, The good news is that MX51 Eval board Rev 2.5, CPU Rev 3 Ethernet is working. The bad news is that it's not based on the latest u-boot git. Hopefully that will change soon. Here's how to get it going: wget ftp://ftp.denx.de/pub/u-boot/u-boot-2009.08.tar.bz2 wget http://www.efn.org/~rick/pub/u-boot-v2009.08-imx_09.12.00.tar.bz2 tar jxf u-boot-2009.08.tar.bz2 # expand u-boot tar jxf u-boot-v2009.08-imx_09.12.00.tar.bz2 # expand patches mv patches u-boot-2009.08 # move patches to righ spot cd u-boot-2009.08 ./patches/patch-uboot.sh # install u-boot patches make mx51_bbg_config; make # CAUTION: the following command destroy's SD partition table: sudo dd if=u-boot.bin of=$(SD_CARD) seek=0 bs=512 # then format your SD card with a filesystem Cheers, Rick