From: Albert ARIBAUD Date: Tue, 1 Jul 2014 21:45:51 +0200 Subject: [U-Boot] SPL broken on i.mx31 platforms In-Reply-To: References: <53B2B8B8.7010406@hale.at> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, On Tue, 1 Jul 2014 10:53:57 -0300, Fabio Estevam wrote: > Hi Helmut, > > On Tue, Jul 1, 2014 at 10:33 AM, Helmut Raiger wrote: > > Hi, > > > > the commit 41623c91 breaks the SPL on i.mx31 platforms. > > The original startup code (start.S) was position independent to > > allow relocation in board_init_f. This is necessary as the internal > > RAM used by the IPL to load the first 2kB from NAND is also > > used by the NAND controller to buffer pages. As far as the issue goes: where and how exactly is the code not position independent now? > > Does changing the startup code back to PIC generate any > > drawbacks on other ARM platforms? How would this changing back to PIC be implemented? Not by reverting the patch, I hope. > > What was the intention of the change besides unifying? Any other intent would be stated in the commit message. > > Could someone verify the issue on a i.mx31 platform. > > Magnus also reported the same issue to me recently. > > I don't have access to a mx31 board at the moment to investigate this bug. > > Maybe Albert, Stefano or Magnus could help? I don't have mx31 hardware either. > Thanks, > > Fabio Estevam Amicalement, -- Albert.