Return-path: Received: from smtp.compex.com.sg ([116.12.130.103] helo=compex.com.sg) by bombadil.infradead.org with esmtps (Exim 4.87 #1 (Red Hat Linux)) id 1cRaYJ-00039f-Ov for ath10k@lists.infradead.org; Thu, 12 Jan 2017 08:16:12 +0000 Message-ID: From: "Phyu The" References: <20170110061217.096FD148A08@compex.com.sg> <63DDC83FD9364560ACBA60D17C3F5AD8@PhyuThe> <5874F1BC.80505@candelatech.com> <10981E9AB9EA46A1897BE3E5CF661C0F@PhyuThe> In-Reply-To: Subject: Re: QCA9880 3x3 80Mhz low performance Date: Thu, 12 Jan 2017 16:15:34 +0800 MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset="us-ascii"; Format="flowed" Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org, Ben Greear Dear Ben, Thanks for your reply and suggestion. I have tried as your suggestion to test IPQ8064+QCA9880 with Ath10k CT firmware/driver to run throughput UDP/TCP. Unfortunately, I could not be able to see throughput improvement. Could you please suggest what may cause low throughput? thanks, Phyuthe -----Original Message----- From: Ben Greear Sent: Thursday, January 12, 2017 12:59 AM To: Phyu The ; ath10k@lists.infradead.org Subject: Re: QCA9880 3x3 80Mhz low performance We have not done a lot of testing in AP mode, but when using 9880 3x3 compex NICs in our 2U rackmounts (high end Intel E5 processors), and with CT firmware/drivers, we see near 950Mbps UDP download in station mode. I think we were a bit slower in AP mode, but not that much. Are you testing TCP or UDP traffic? http://www.candelatech.com/images/data-comp-07-20-2016-1147-with-labels.png Have you tried normal STA/AP mode instead of WDS? Maybe you are CPU bound on your platform? Thanks, Ben On 01/10/2017 05:09 PM, Phyu The wrote: > Dear Ben, > > I configured AP_WDS and Sta_WDS mode, channel 149, 11ac, 3x3, 80MHz and > without encryption. I used 2 RF boxes with 3 adjustable attenuators > running throughput > by Ixchairot to get best performance. However, throughput seems limited to > 640Mbps. Kindly see attached for your reference for more details. > > thanks, > Phyuthe > > -----Original Message----- From: Ben Greear > Sent: Tuesday, January 10, 2017 10:37 PM > To: Phyu The ; ath10k@lists.infradead.org > Subject: Re: QCA9880 3x3 80Mhz low performance > > You should provide a lot more information about how you configured and > tested the system, > including traffic generator and RF environment, etc. > > Thanks, > Ben > > On 01/09/2017 10:19 PM, Phyu The wrote: >> Dear Sir, >> >> I tested performance throughput test used WPQ864 + QCA9880 11ac 80MHz is >> 640Mbps that is very low since theoretical data rate is 1300Mbps. It >> should be at >> least 866Mbps. Could you please suggest me how to get better performance? >> >> thanks, >> Phyuthe >> >> _______________________________________________ >> ath10k mailing list >> ath10k@lists.infradead.org >> http://lists.infradead.org/mailman/listinfo/ath10k >> > -- Ben Greear Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k