From: Bill Cook Date: Mon, 20 Apr 2009 10:57:49 -0400 Subject: [U-Boot] Build errors u-boot-v2 iMX27 Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Dear ML, I'm trying to build u-boot-v2 for an iMX27 based board. I'm getting a HW/SW floating point mismatch error and hope someone will point me to a solution. Building with: make ARCH=arm CROSS_COMPILE=arm-eabi- It works along fine until I get an error on each of these files: arch/arm/lib/_ashldi3.o arch/arm/lib/_ashrdi3.o arch/arm/lib/_divsi3.o arch/arm/lib/_modsi3.o arch/arm/lib/_udivsi3.o arch/arm/lib/_umodsi3.o arch/arm/lib/_lshrdi3.o arch/arm/lib/findbit.o arch/arm/lib/io-readsb.o arch/arm/lib/io-readsw-armv4.o arch/arm/lib/io-writesb.o arch/arm/lib/io-writesw-armv4.o Error is: arm-eabi-ld: ERROR: arch/arm/lib/_ashldi3.o uses hardware FP, whereas arch/arm/lib/built-in.o uses software FP arm-eabi-ld: failed to merge target specific data of file arch/arm/lib/_ashldi3.o The source files are assembly, any C files have the -msoft-float compile option. What gives? Regards, Bill Cook cook at isgchips.com