From: "Mark Knecht" Subject: RE: Hammerfall DSP System Problems Date: Wed, 11 Jun 2003 07:15:34 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20030611064511.GA551@always.joy.eth.net> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20030611064511.GA551@always.joy.eth.net> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Joshua N Pritikin Cc: Paul Davis , frankgaetano@collegeclub.com, Alsa-Devel List-Id: alsa-devel@alsa-project.org > > so I think > > I'm almost set to be able to try this stuff out again. > > For what it's worth, i had problems with alsa 0.9.4 & SMP. i think > there are some spinlock changes that aren't very well debugged yet. > On the other hand, alsa 0.9rc7 seems fairly stable. i've gotten > some lockups, but i've also used jack for 4-5 hours without any > problem. Well, I found last night that if I removed Alsa and then rebuilt it, that as long as I didn't power down 0.9.4-rc1 stayed up and I could see my card even after a warm boot, but again, after a cold boot Alsa no longer recognized the card. So, my new strategy is that every morning, as I brew my tea, I now do: emerge -C alsa-driver alsa-utils alsa-tools ACCEPT_KEYWORDS="~x86" emerge alsa-driver alsa-utils alsa-tools and then warm boot to get the driver to find the card. I still don't get sound, but at least my CPU knows the card is there. I guess life is good when you finally know how to cope with it! ;-) Mark ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.