From: "Mark Knecht" Subject: RE: Hammerfall DSP System Problems Date: Tue, 10 Jun 2003 13:02:57 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: <20030610183131.76A8A3EFBF@vivaldi.controlnet.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-reply-to: <20030610183131.76A8A3EFBF@vivaldi.controlnet.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Paul Davis Cc: frankgaetano@collegeclub.com, Alsa-Devel List-Id: alsa-devel@alsa-project.org > > > >Later that evening I powered down. Upon rebooting the next morning it > >failed, and has failed ever since. That was last Thursday evening. > > the same thing happened to me a week ago. i have, as usual, not had > time to investigate further. > Well, it is actually quite comforting to know that folks with far more experience than I sometimes see the same strange behaviors! > > > >This whole Alsa/HDSP thing is amazingly weird... > > at the moment, i regret that we made the move to user-space loading of > the "firmware" when we did. i think now that it was a mistake to do it > at that time. it has caused a fundamental change in the way the driver > sets up, but it came at a time when we weren't confident that setup > was working for various cases. I'm sure that it will get worked out. I think Joshua is currently having some good successes with the HDSP 9652, and I'm currently learning how to modify a Gentoo ebuild to accomplish doing a patch. I also have (after more pain than I wish to recount) Windows on this Gentoo box in a dual boot config, and have the RME firmware tools to upgrade and downgrade, so I think I'm almost set to be able to try this stuff out again. I'm sure over the next few weeks and months this will get straightened out. :-) Mark ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.