From: "Mark Knecht" Subject: RE: aplay: pcm_write:1025: write error & SNDRV_PCM_IOCTL_PREPAREfailed:device or resource busy Date: Mon, 2 Jun 2003 07:33:47 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Takashi Iwai Cc: Alsa-Devel List-Id: alsa-devel@alsa-project.org > > just add the following line to the end of /etc/modules.conf: > > options snd-via82xx dxs_support=2 > > (or dxs_support=3) > > and run "/etc/init.d/alsasound restart". > > note that the option above is available only on the very recent ALSA > version. > > > ciao, > > Takashi Thanks. That's very clear. I'll try it this evening. (At work right now.) As for Alsa versions, this is a Gentoo ebuild of Alsa. It identifies itself as '0.9.3c-r1'. (Is that right? I might have thought 0.9.3-rc1?) Anyway, that's what it says. New enough for these options? Thanks much! Mark ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5